Used Crank for sale (613)

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm Fpjdpfx Aaovuk H Ej Njg dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm Fedpfjvut N Ajx Aa Nepg ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories +++ Attention: Machine is part of an online auction! +++ Fpodpfx Ajx R Eftja Neg

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 Fpsdpfsy E T Dgsx Aa Nog - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min Fjdpfxsvuk S Us Aa Nspg distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1973, pressure 500 t Fjdpfxjvuk Eue Aa Nspg distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm Fpodob H Ibuspfx Aa Nsg throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm clear distance between columns: 2050 mm throat depth: 250 mm Support table size: 220 x 2200 mm Fpsdshy Tqaepfx Aa Nsg electr. Drive: 380 V, approx. 5 kW Weight: 2.7 tons

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Fpjdpfev E Rm Hsx Aa Neg New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Fpsdpfjxwd Iwsx Aa Neg Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 Fjdpexcbpisfx Aa Nepg - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg Fjdpfx Asxf Uytja Nepg

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Fodpfxox N Sc Ae Aa Nepg Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: used, Year of construction: 2010, pressure 600 t Fpsdpevut Dyjfx Aa Njg distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Year of construction: 1988, condition: used, Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available Fpsdpfjhgm D Hjx Aa Nog -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 Fpedpfxjt H Trdj Aa Nog -Load capacity: 10 t -Lifting height: 330 mm -Dimensions: 300/210/H685 mm -Weight: 35 kg

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch Fpjdpfx Aaeb A I Hno Neg -Loading capacity: 10 t -Safety crank -self-locking gearbox -with profiled head claw -with firm claw -Weight: 50 kg

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Fpsdpfexf Uq Eex Aa Njg Good condition

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 200 mm, number of axes: 5, table length: 2,900 mm, table width: 1,200 mm, For sale: operational Italian multifunctional stone processing machine. The machine is capable of various tasks: cutting (including at 45°), milling, drilling, polishing surfaces and edges, and surface brushing. The head rotates 360° around its axis and tilts up to 90°, making the machine highly versatile and convenient to use. Adjustable speed (compressor motor). The machine is mechanical – reliable and easy to operate. Table size: 1200 x 2900 mm. A hole milling frame is included. Price – €13,000. Negotiable. Fsdpfeyxchuex Aa Nepg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2026, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Fodpfx Asxrtarea Nepg Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, (Please tell us your offer price) Fjdpow A Axbjfx Aa Nspg Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fedpfx Aet Uufbsa Nspg Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface Fpsdst Uuf Ujpfx Aa Neg The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Fjdpfxsy N Sxwj Aa Njpg Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected Fpodpfx Aaox Ik Tdo Neg under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!