Used Crucible Oht for sale (56)

Condition: used, Year of construction: 2009, functionality: unexamined, Complete Scholz OHT system with rapid closure The system consists of: - The OHT autoclave with rapid closure - The preheater located above - Condensers 1 and 2 - The heat exchanger - The transfer pump - The control cabinet - The connecting pipeline with fittings The vessel consists of a pressure- and vacuum-resistant shell with connection flanges and sockets. Rails made from L-profiles are installed in the base of the vessel to allow loading with transfer carts. A suction profile is integrated into the vessel floor, which retains coarse contaminants inside the vessel. This prevents them from entering the preheater. The OHT autoclave system is equipped with a SCHOLZ rapid closure for loading. The system's rapid closure is operated as follows: Hsdpfjw E Hblsx Abzew - Safety locking device, manual - Lid rotation mechanism, hydraulic - Door hinge, hydraulic The technical data sheet for each component is attached. The system is not in operation and therefore can be inspected thoroughly and at leisure. Complete documentation including wiring diagrams is available. Should you have any questions, please feel free to contact us.

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately We have two more Gietz models. Please ask for an offer. Hedpfx Asrbhd Tsbzow If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: used, Year of construction: 1964, colour units 1 max. printing speed sheets 5500 /h max. paper size 26 x 38 cm serial no. 145.346 Hjdpfx Abjwh Ukaozjw include HAKRO Hotfoil unit

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, punching force: 350 t, power: 4 kW (5.44 HP), Equipment - Format 82x112cm Hsdpfsrwi Hvex Abzew - Motorized quick-clamping frame - Cutting plate - Timer for opening and closing times - Brake on the flywheel - Pneumatic clutch with safety valve - 3 operating modes - Manual pressure adjustment via handwheel - High-quality safety systems - CE certificate - Long-term spare parts security - Manufacturer: cauhe-industries.com

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Punching plate Crosland CVK 980 Size 78 x 100 cm Hedpfxowif Hue Abzsw Year 2004 in very good working condition available immediately

Condition: good (used), machine/vehicle number: 160612, Heidelberg roll feeder, machine number 160612, in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment. Hsdpfx Ajvvifiobzow

Condition: good (used), Punching crucible Simplacutter, 72 x 102 cm, in a good condition, immediately available Hsdpfx Abeiypwaozjw If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house after previous appointment.

Year of construction: 2024, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Hjdpfx Asv Iqwdsbzsw Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: good (used), Year of construction: 2021, Medium-size baler, MACFAB, 150A – used -: Ex-site price: now only €2,950 (net) instead of €3,900 (net) Manufacturer: MACFAB Model: 150 AUTO HT Serial number: MFE1066 Year of manufacture: 2021 Serial number: 167317 Bale dimensions Height: 1,000 mm Width: 975 mm Depth: 800 mm Weight: up to 150 kg (depending on material) LOADING CHAMBER DIMENSIONS Height: 470 mm Width: 975 mm Depth: 800 mm Machine dimensions Height: 2,630 mm Width: 1,560 mm Depth: 1,030 mm Weight: 780 kg Transport height: 1,955 mm SPECIFICATIONS Power supply: 220 – 240 Volt, single phase Motor: 2.2 kW – 16 Amps Pressing force: up to 8 tons Noise level: 68 dB Hjdew D E Uuspfx Abzew Cycle time: 40 seconds A medium-sized vertical baler that compacts cardboard or plastic film into bales weighing up to 150 kg. Ideal for businesses such as supermarkets or retail stores generating a moderate volume of packaging waste. The large top door opening makes it easy to load materials into the bale chamber. Finished bales can be easily ejected onto a Euro pallet using the hydraulic ejection cylinder. The baler is equipped with three strapping points to secure the bales after pressing. Original price: €10,802 (net) Condition: good Availability: immediately Location: 68307 Mannheim

Condition: used, mileage: 44,855 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,345 kg, first registration: 04/2021, emission class: euro6, color: white, number of seats: 2, Year of construction: 2021, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Construction: Panel van * Cool & Sound Package 1 * Air conditioning * Driver’s seat adjustment, 6-way * Tow bar * Cargo partition wall * Cargo area flooring (wood) * Sliding side door right * Rear wing doors * Increased payload Technology: * Multimedia audio system * Audio controls on the steering wheel * Bluetooth hands-free system * Cruise control * Luggage compartment lighting (LED) Safety/Environment: * Driver/passenger airbags Hsdpfx Aewggtqebzow * ABS/ESP * Driver assistance system: Hill Start Assist (HSA) * Driver assistance system: Trailer Stability Program (TSP) * Low emissions according to Euro 6d-TEMP * Start/Stop system Miscellaneous: * German first delivery * 1 previous owner * Engine: 1.5 L - 75 kW CDTI DPF * Wheelbase 2,785 mm * Payload 700 kg according to registration certificate Your reliable partner for all matters relating to cars/commercial vehicles in 28832 Achim at the Bremer Kreuz since 1972. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favourable special rates. If you are interested, we would be happy to prepare an individual offer for you! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is required, we are happy to offer you a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your “new” commercial vehicle is possible through our external partners for an additional fee. The information given in advertisements, on the Internet, price tags and images constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment/features should be checked separately if required. Subject to error and prior sale.

Year of construction: 2022, operating hours: 2 h, condition: as good as new (ex-display), machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Hedpswtc Anofx Abzsw Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Hedstxb Avspfx Abzjw

Condition: like new (used), 1 unused universal milling head in elevated version for subsequent mounting on conventional, NC or CNC milling machines or boring mills of any kind, system "HURON" swiveling over 2 planes, any angle adjustable spindle mounting ISO 40 projection approx. 360 mm D8ot3uy designed drive power 10 HP max. speed 1800 rpm weight approx. 82 kg Accessories / special features: - With adapter plate in elevated design with additional helical gear wheel - Tool clamping manual - The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel - 2 mutually rotatable axes, thus any setting angle is possible! HURON" system - tapered engagements are ground according to the "KLINGELNBERG" system - rolling bearings of the main spindle are made of conical high precision rollers Hjdpobpmw Nefx Abzsw - 1 drive gear with helical teeth - 1 tool tightening screw - Instruction manual Delivery time: immediately, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Year of construction: 2020, operating hours: 250 h, condition: used, lifting height: 5,000 mm, free lift: 1,250 mm, mast type: triplex, construction height: 2,950 mm, fork length: 2,400 mm, fork carriage width: 2,050 mm, drive type: Elektro, load capacity: 12,000 kg, Heavy-duty forklift truck - electric Load center: 600 Fork width: 200 mm Fork thickness: 70 mm ISO Class: Pin-Type Mast type: Triplex Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 9.00 - 20 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 355 / 65 - 15 Rear tires Condition: 80 - 100% Battery Volt: 96V Battery Ah: 1550Ah Hjdpfjt Dfa Uex Abzow Battery Manufacturer: TAB Battery type: PzS Battery year of construction: 2020 Battery condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, Full cab with heating complete lighting system

Condition: used, mileage: 32,000 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,355 kg, first registration: 03/2022, emission class: euro6, color: red, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer coupling preparation Multimedia audio system with Apple CarPlay & Android Auto Floor covering: Luggage/cargo compartment floor (wood) Luggage compartment lighting (LED) Rear parking pilot system Warning system for seat belt Passenger side Steering wheel (sports/leather - 3-spoke flattened at the bottom) with multifunction Visibility package, driving assistance system: High beam assistant, Windshield wipers with rain sensor, Info display, large, Vehicle key (2) both folding, Security package, Driving assistance system: Traffic sign recognition, Driving assistance system: Autonomous Emergency Brake Assist with front collision warning and pedestrian detection, Driving assistance system: Lane departure warning, Driving assistance system: Drowsiness detection sensor, Heated steering wheel Hodpsufbwqjfx Abzsw Further equipment: Audio controls on steering wheel, Increased payload, Driving assistance system: Hill start assist (HSA), Rear wing doors without glazing, Body/construction: Box body, Body variant: Vehicle length L2, Closed load compartment partition, Steering wheel (sports/leather - 3-spoke, flattened at the bottom) with multifunction, Engine 1.5 ltr. - 75 kW CDTI DPF, hubcaps, wheelbase 2975 mm, low-emission according to Euro 6d emissions standard, sliding door right, seat adjustment front left (6-way), steel rims 6.5x16

Condition: new, empty load weight: 1,048 kg, maximum load weight: 2,452 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,550 mm, loading space width: 2,010 mm, loading space height: 300 mm, loading space volume: 2.8 m³, color: silver, construction height: 1,560 mm, working width: 2,080 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA - Make: Hapert Trailers - Model: Indigo HT-2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 455 x 201 x 30 cm - External dimensions (LxWxH): 618 x 208 x 156 cm - Loading height of floor: 63 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,048 kg - Payload: 2,452 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic, 800 kg - 100 km/h approval: Included! Vehicle body: - Brake: Yes - Number of axles: 2 - Floor: Full aluminum floor - Drop sides: Aluminum drop sides - Drop side height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 8 - Multifunctional vehicle: Yes - Tipping / lowering function: Tiltable - Hydraulic pump: Double-acting hydraulic pump - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Plastic mudguards - Spare wheel: Optional, can be retrofitted - Bucket storage: No - Superstructures / attachments: Optional, attachable - Ramp chute: No - Ramps/ramp flap: Yes - Type of ramp: Full-length tailgate - Load ramps: - - Drive-on angle: approx. 11.5 - Supports: Integrated in tailgate - Lashing eyes: 8 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides foldable and removable - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, lattice extension, drop side extensions or front wall extension - Sturdy eccentric locks - Hydraulically tiltable loading area (11.5 drive-up angle) - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options for attaching tarpaulin frames, lattice extensions, drop side extensions or front wall extensions - Many options for attaching tarpaulin frames, lattice extensions, drop side extensions or front wall extensions. hot-dip galvanized - many continuous welded longitudinal beams for high point load - steel ramp standing on shaft 100cm - stable eccentric locks - support brackets on ramp - lifting aid for ramp - very low chassis for low drive-on angle - 8x lashing eyelets laterally recessed in the frame profile (1000dAN/kg) TÜV certified - parabolic spring axle from KNOTT - wheel shock absorber for 100km/h mounted - parabolic spring axle for absolute driving comfort! - Automatic reverse drive - KNOTT overrun device and parking brake - very stable bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Special equipment included in the price: - All-aluminum profile floor - Aluminum drop sides 30 cm high (front and side), instead of fixed Combi Protect Rail New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available Hedou Hrm Ujpfx Abzjw

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs Hedsiu Smbepfx Abzsw 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Year of construction: 2003, condition: good (used), input frequency: 50 Hz, machine/vehicle number: 3680-03, Resistance furnaces, 2 pieces, electric, crucible, heating, metal storage, melting, capacity 300 kg/h. Capacity of one furnace, aluminum alloy, weight 1500 kg, volume of the heating chamber 1.3 cubic meters. Energy consumption in production operations (maintaining molten metal at a temperature of 720 degrees C, open crucible) approx. 20 kW. Energy consumption during production inactivity (maintaining the molten material at a temperature of 720 degrees C, closed crucible) approx. 10 kW. Maximum melting point 900 degrees C, electrical power 70 kW. Voltage 230/400V, 50Hz, lap-automatic PID controller, bath thermocouple and safety controller, PLC control. The weight of one furnace is approx. 2600 kg. Furnace dimensions: length 1850mm, width 1850mm, height 1650mm + cover with installation 300mm. Dimensions of the frame for the stoves: length 3800mm, width 1850mm, height 210mm. Note: We also add an unused reserve crucible. Hedpfx Abed Ev Iajzew

Year of construction: 1991, condition: used, Technical details: max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Material = steel is heat resistant * Hodpfx Abju N Ak Nezew

Year of construction: 1995, condition: excellent (used), SPECIAL STEEMAKING SHOP EQUIPMENT   Vacuum Induction Melting Furnace P1000 ALD, 8 tons capacity Electro Slag Remelting, type ESFR F350/1, capacity 1,3 tons electrode AJAX, Induction Melting Furnace 6.3 ton capacity with two crucible AJAX Vibration Scrap Charging for AJAX Induction Melting Furnace Spectrometre ARL 3460 KRAUTKREMER, Ultrasonic Testing Equipment Electrical Transformer 1600 KVA 20/0.4 KV Metalographic Microscop Metalographic specimen cutting and polishing Diesel Generator Water treatment plant Cutting saw Please contact us for more technical details and photos. Hsdpfx Asif Ulusbzew Thank you!

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Hsdpfxoucfwpe Abzew

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: EP 32778, SEMI-AUTOMATIC DIECUTTING AND CREASING MACHINE - ETERNA ML 680 G Year of manufacture: 2006 Hsdpfx Absucfuhozsw Serial number: EP 32778 Full technical documentation Crucible connected, possibility of testing. Condition: very good- from new in one company- very little used Attractive price for quick sale.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Hodjw Izrcspfx Abzsw Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Hsdpfx Aoud Svzjbzow

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CRUCIBLE (DIE-CUT) + HS (HOT STAMPING) SEMI-AUTOMATIC DIECUTTING AND CREASING MACHINE - ETERNA ML 1092 G III Year of manufacture: 11. 2005 Serial No.: EP 32668 Full technical documentation HS (hot stamping) - VERSOR SZ B1 Year of production: 2006 Factory no. 0620 Crucible +HS connected, possibility of testing. Condition: very good- complete from new in one company- very little used Hodoubylfepfx Abzew Attractive price for quick sale.