Used Die-Casting Machine for sale (66,417)

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Rsdpfxowpr Ufe Aazen Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Rjdpfoxn Sp Dex Aazen

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Redsw R Dgzopfx Aazen

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Rjdpfott Dybox Aazjn

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Rsdpfxewywn Ee Aazsn

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Rodpfeydkgzjx Aazen Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. Redpjydkgnefx Aazjn The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), Year of construction: 2001, operating hours: 47,000 h, Large format Rjdpoxl R I Tjfx Aazsn Operating hours: 47,000 hours

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system Redpjx Dahaefx Aazon This machine is part of an online auction.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) Rsdpfx Aeya Iaqsazen - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rjdpfx Aswnhfkeazjn Lukas van Rossum

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Rjdpfxohmmfks Aazsn Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Redpfexpqy Djx Aazon Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Redpfx Aew Iq Ugjazsn Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Redpfxox N Dyme Aazen Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: excellent (used), Year of construction: 2023, Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Rsdpfx Aownfcgeazen Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Year of construction: 2017, operating hours: 6,417 h, condition: ready for operation (used), General Data Machine weight 4400 kg Movement X-Axis Movement 600 mm Z-Axis Movement 400 mm Y-Axis Movement 400 mm Main Drive Number of axis 4 Rjdpfjx Nr N Nox Aazon This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 2019, operating hours: 8 h, condition: ready for operation (used), This 4-axis Mitsubishi EA28V ADVANCE die-sinking EDM machine was manufactured in 2019. It features a CNC Mitsubishi Advance M700 with a 15” touchscreen, pre-installed 3D CAD/CAM software, and supports Parasolid 3D file imports. The machine offers X/Y/Z travels of 650 × 450 × 350 mm and a C-axis with an EROWA quick-release system. Consider the opportunity to buy this Mitsubishi EA28V ADVANCE die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM Redpfxox D Enfe Aazen

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump Redpec R Iyasfx Aazjn -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm Rjdpfx Aji Eg Nksazjn -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm Rodpfxsc Uldrj Aazsn -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Condition: ready for operation (used), functionality: fully functional, Machines for the production of structural packaging. Consisting of a die-cutter H-142, year 1986, size 900x1400 mm; a boxmaker by Pack Projekt (year unknown, purchased in 2009, feed width 1450 mm, additional creasing bar for vertical creasing, 350 mm slitting knife); and a gluing machine for self-adhesive tape, silicone tape dispenser and tear thread (feed 1400 mm, year 2010, hot melt glue system). All machines are used, operational, and ready for immediate use. SEE PHOTOS AND DOCUMENTS. Rjdpfxjyan I Ij Aazon If interested in individual machines, simply send us your proposed price for the relevant machine and we will contact you.

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Rodpfx Aaex D Inbozsn Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Redpfx Aaswtzdwezsn Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Rsdpowzifxsfx Aazen