Used Curved Wood Pres for sale (17,444)

Condition: excellent (used), Year of construction: 2009, HOLZMA cross-cutting unit for dividing panel offcuts, such as those produced by angular cutting lines – part of the automatic waste disposal system for panel sizing lines. TYPE HRZ 540 Year of manufacture: 2009 Machine no. 0249083537 Redpfx Aeyay Igsfhon Trim and edge cut waste falls down through the waste flap into a vibrating chute. This transports the offcuts to a chipper (cross-cutting unit). From there, the shredded waste is conveyed, for example via a waste incline belt, into a scrap bin.

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Rsdpfx Asxyqncjfhen

Condition: used, Year of construction: 2015, functionality: fully functional, - Year of manufacture: 2015 - Made in Bulgaria - Operating manual and CE certificate available TECHNICAL SPECIFICATIONS: – Workpiece height: 8–45 mm – Minimum workpiece length: 100 mm – Minimum workpiece width: 100 mm – Edge thickness: 0.4–3.0 mm – Feed speed: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW Rodpfx Afsw H Ryujhjn – Milling unit: 12,000 rpm – Corner rounding unit - minimum workpiece length: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1 x 1.1, 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge cutting unit: – Glue application unit: – Polishing unit - motor power: 2 x 0.18 kW – Polishing unit: 2,800 rpm – Extendable support with rollers: – Extraction port diameters: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions (L x W x H): 4,130 x 1,220 x 1,470 mm – Weight: 1,180 kg

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Redpfx Afedzqnyjhon Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 500-5512, axle configuration: 1 axle, Equipment: type plate available, We are selling a Weima WLK 6 S shredder together with a Koppern grinder and transport system. Year of manufacture: 2002. For more information, please contact us. Rjdpoyan Nljfx Afhsn

Condition: excellent (used), Work table with beech wood top, approx. 80 x 250 cm, (2 pieces) one incl. drawer unit on the left, the other with drawer unit on the right, both incl. 4 flour trolleys each for approx. 100 kg flour or similar made of stainless steel, in good condition (see also photos). Working height: approx. 90 to 95 cm (can be adjusted via plastic feet) - New price: 3,390.00 net (per piece). Weight incl. trolleys: approx. 200 kg per set. Price, complete incl. trolley: EUR 2,250 or 4.250 for both benches. Or: Work table with beech wood top, approx. 80 x 350 cm, (several variants available), for example with 10 plastic ingredient containers and 2 flour trolleys for approx. 100 kg of flour each or similar made of stainless steel, in good condition (see also photos). Working height: approx. 90 cm (can be adjusted using plastic feet) - Original price: € 3,190 net. Weight including trolleys: approx. 200 kg Price, complete including trolleys, containers, etc.: € 1,950 Or: Work table with beech wood top, approx. 80 x 350 cm (several versions available), for example with 12 plastic ingredient containers and 3 stainless steel drawers (left), in good condition (see also photos). Working height: approx. 90 cm (can be adjusted using plastic feet) Rjdev R E Hrjpfx Afhjn Price, complete with containers: € 1,750 Delivery (depending on distance) or shipping possible, please enquire if interested.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Bruks Wood Chipper Year of manufacture: 2001 Technical condition: very good – after overhaul Technical data: - main engine power: 110 kW - Infeed opening: 700 / 400 mm Rodpfxoyalfke Afhen - Rotor: 3 knives - Feed rollers: 12 units – 9 lower / 3 upper - Vibrating infeed conveyor: 40 m - Inclined discharge conveyor: 13 m

Condition: used, Year of construction: 2020, Pre-feeder 1600 width /2000m Redjv Ni I Ropfx Afhjn Bottom printing Max sheet 1270x2032 mm Min sheet 400 x 600 mm Thickness max: 9mm Max height of bundle 250 mm Min height of bundle 20 mm Height pile: Standard 1900 mm with elevation of 300mm : 220 mm With elevation of 500mm : 2400 With elevation 700mm : 2600 Max weight pile : 1300kg

Condition: not inspected (used), Year of construction: 2010, ZUANI cutters for wood-aluminum windows Rsdpfxsxlk Nks Afhen The stated price is for all 4 cutters. If you need the manufacturer numbers of the cutters, please send an email!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 2,600 mm, Silane Glass Primer Highlights Combat moisture resistance on glass from adhesives Apply as a primer to bond to glass: Essential primer for bonding letters to glass shop fronts and for bonding glass in bathrooms or kitchens Recommended for use with 3M™ VHB™ tape Take anywhere, with a tough and portable design Easy to apply Silane Glass Primer combats moisture resistance on glass from adhesives - READY FOR USE Combat moisture resistance on glass from adhesives with Silane Glass Primer. Our primer is an essential product when bonding letters to glass shop fronts and glass in bathrooms or kitchens. It’s recommended for use with tape. Suggested applications Use as an essential primer for bonding letters to glass shop fronts and for glass in bathrooms or kitchens Redpfxjvzyics Afhen

Condition: as good as new (ex-display), Year of construction: 2025, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washing pump (Lowara), spray system with stainless steel nozzles additional manual cleaning with high pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - useful height: 490 mm - max. loading weight: 200 kg - Spray pressure (washing pump): 2.3 bar - spraying pressure (HD pump): adjustable up to max. 60 bar Rodpfjd R Ahlex Afhjn - tank volume: 175 litres - Heating: electrically adjustable (RT - 60°C) - plant dimensions (LxWxH): 1.300 x 1.500 x 2.100h mm - empty weight: approx. 200 kg ++washing time clock freely adjustable (minutes and hours) ++complete cleaning machine (interior and exterior cladding) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2.000 micron) ++Operating hours counter ++Steam vapour extraction incl. condensate recirculation ++Omron timer for setting the time in sec./min./hour. Parts washer is as good as new (test plant/technical centre); Year of construction: July/2021 OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: new, Year of construction: 2025, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Redsv R Tihspfx Afhon Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Year of construction: 2025, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Rjdovugxwopfx Afhon Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. Rsdpfxsridpaj Afhsn LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 400V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 400 V Rsdpjwymwcjfx Afhon Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: new, Year of construction: 2025, PROFESSIONAL WOOD SPLITTER 16 TONS. The robust construction and high-quality wedge guarantees a long service life and trouble-free operation. The machine is designed for splitting wood up to approx. 700 mm in diameter! Its stable, robust construction ensures excellent working results. Rodpfx Aeuqiq Dofhjn Machine description The splitter is equipped with an overload valve that drains oil into the tank and a powerful, trouble-free gear pump. The tree lift system makes it easy to place heavy materials directly under the splitting wedge 5-bolt power connection Angled wedge makes it easier for the wedge to sink into the material. FAULTLESS HYDRAULIC PUMP! Technical specifications Thrust force 16 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum timber length 350 mm Maximum length of wood 1100 mm Splitting speed (continuously adjustable) 4.6 - 14.2 cm/sec. Return speed 6.2 cm/sec. Wedge stroke length 948 mm Motor power 4,5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic pressure 27.7 MPa Dimensions 1050 x 1550 x 2500 mm Weight approx. 259 kg

Condition: new, Year of construction: 2025, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Redpfxji Ab Aks Afhon Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Rsdpsg Ngixjfx Afhsn The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area Rsdpfjf Eyqqox Afhsn A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors Redpfx Aowcd Tmsfhjn UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: new, Year of construction: 2025, PROFESSIONAL 14 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 700 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. The wood splitter is equipped with an overload valve draining oil to the tank and an efficient, failure-free gear pump. Device equipped with side tables The angled wedge makes it easier to sink the wedge into the material. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3.5 kW / 400 V Pressure 14 T Max. wood length 1040 mm Wood diameter range approx. 100 - 700 mm Redpfsridp Eox Afhon External dimensions 1440 x 1350 x 2280 mm Weight 185 kg

Condition: like new (used), Year of construction: 2009, Saw for wood bundles Rodox Sqfzopfx Afhsn

Condition: used, Year of construction: 2013, Drum shredder TRH 200x650 3WL, 75 kW motor Rsdpfx Afeyappajhsn

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, unladen weight: 7,580 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year: 2005, sliding roof, axle type: BPW = Further Information = General Information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload: 31,420 kg Gross Vehicle Weight: 39,000 kg Rjdpfjx S Uzaox Afhen Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Vehicle Inspection): valid until 09.2026 Condition General condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various model years and price classes. Why buy at Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognisable quality • Good price • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognisable quality’ • And more.... Please visit our website for special offers and full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Redsvyp Avopfx Afhon Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side