Used Pre Heater for sale (47,504)

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3 Godpfxsu U Ad Rj Aabeuh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller manufacturer: Cybelec, working width: 4,100 mm, pressing force: 225 t, TECHNICAL DETAILS Pressure: max. 225 t Folding length: max. 4,100 mm Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg EQUIPMENT Gsdpsxhd Rmjfx Aabeuh - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch

Condition: excellent (used), volume flow: 3.2 m³/h, heating capacity: 35 kW (47.59 HP), Manufacturer: Appen Group Aermax AE3 Maximum air flow: 3200 m3/h Rated power 35 kW Gas connection: 3/4" Axial fan: 1 piece Gas type: G20 Battery: 230V, 50Hz, 0.25kW Machine dimensions: Height: 95cm Length: 90cm Godpfxoqgc Snj Aabsuh Width: 55cm

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety Gujdpfxelcd Szo Aabeh even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, functionality: fully functional, Air volume: 6.300 m³/h Air velocity: 1,94 m/s Isolation: 50 mm Filter M5 and F7 ventilator active power: 2.840 kW Heaters - temp. Air inlet / outlet: -12 / 22 °C Coolers - temp. Air inlet / outlet: 32 / 20 °C Gusdpexmim Dsfx Aabeh dimensions (LxWxH): 3.900 x 1.050 x 1.050 mm

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Min/max panel height mm 10/60 Feed speed mt/min 3,8 Gujdpfov Ay Hkjx Aabsh Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,800 kg, power: 22 kW (29.91 HP), Technical data: Power: 22 kW Blades: 29 pieces Dimensions: 1800 × 1840 × 1000 mm Gedpfx Aaexnznvobjuh Weight: approx. 1,800 kg Condition: New and unused On pallet, immediately available for delivery or collection Location: 86554 Pöttmes

Year of construction: 2016, condition: ready for operation (used), Various machines for processing, walking, steaming, and preforming uppers and lasts for the shoe manufacturing industry are available. 1) Moccasin upper steamer Elettrotecnica 232/S, year of manufacture: 2008, tank capacity: approx. 15l, heating time: approx. 8min, power consumption: 6kW, machine dimensions X/Y/Z: approx. 600mm/450mm/950mm, weight: approx. 70kg. 2) 2x aluminum last preforming machines Nova M-BO, year of manufacture: 2002, max. temperature: 200°C, machine dimensions X/Y/Z: approx. 950mm/700mm/1350mm, weight: approx. 250kg. 3) Upper walking machine Ring-Leibrock Wasch 3-2K, year of manufacture: 2016, stations: 2, max. temperature: 120°C, stroke rate: 25/min, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 420kg. 4) Upper preforming machine Irleh IR-13/P, year of manufacture: 2005, max. temperature: 160°C, machine dimensions X/Y/Z: approx. 1400mm/900mm/1600mm, weight: approx. 400kg. 5) 2x upper preforming machines RKK Kölsch H-BÜ, year of manufacture: 2007, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 900mm/700mm/1300mm, weight: approx. 210kg. An on-site inspection is possible. Gjdpfx Aexnp Rrsabjuh

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 heat output: 45kw gas type: G20 nozzle diameter: 6mm nozzle pressure 8.7mbar pipe length: 9-12 meters p connection: 360mbar Connection voltage: Max. current consumption: IP30 AC 230V 50Hz Gusdpfx Aajn Uvgioboh

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Guedpfx Aasmqty Uobsh We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. Guedpfx Aasw Hzcasboh c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. Gedpfx Aaef N Nlrobouh • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2008, condition: used, Empty weight: 5 kg Part suitable for: trucks Type number: 81619006412, D4S Airtronic M D4S Occ standverwarming Airtronic M D4S MAN Godpfxjxngg Re Aabjuh OEM : 81619006412, D4S Article nr.: B523010022-veiling Used Airtronic M D4S MAN parking heater

Condition: used, Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor. Gjdpfxexgfvhj Aabouh

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs Guodpfshrnv Njx Aabeh electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Gsdpfx Aaemqty Rsbouh For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2020, condition: like new (used), TWK PEGASO ELECTRIC HEATER – MOD. 150 OAF (150 KW) Guodpfexlkg Njx Aabsh TWK PEGASO 150 OAF electric heater, 150 kW, equipped with 3-way valve, PT100 probe, ZEUS 1.0 touch panel. Excellent condition. Main data: • Brand / Model: TWK PEGASO 150 OAF • Year of construction: 2020 • Power: 150 kW with cooling heat exchanger • Valve: integrated 3-way • Control: 4–20 mA board + 1 PT100 probe • Control panel: ZEUS 1.0 touch screen • Additional features: Integration for remote input Condition: • Electric heater in excellent condition.

Year of construction: 2022, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes Gujdpfxef N Nl Do Aabeh • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: new, functionality: fully functional, fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Gedpfx Aasxli I Sjbjuh Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: new, functionality: fully functional, Year of construction: 2025, The market’s highest-quality, professional-grade heaters, available in sizes from 10.4 kW up to 58 kW. Perfect for multiple uses: garages, workshops, warehouses, greenhouses, barns, events, catering, PVC tents, weddings, churches, industrial halls, hotel lobbies, cellars, or historic stone buildings. Also ideal for frost protection in storage facilities. Ready to use instantly – just plug in and switch on Clean combustion – no chimney required Fuel efficient – consumption ranges from only 0.8 L/h (DHOE-90) up to 4 L/h (DHOE-500F), depending on the model Smart control via app – adjust temperature, monitor alerts, fan work and check fuel levels directly on your smartphone Thermostat with automatic operation – adjustable 0–40 °C, with pre-heating function Dry heat – no condensation like with gas heaters Highly mobile – equipped with 4 durable castors (larger wheels than all competitors) Compatible fuels – biodiesel, diesel/red diesel, or kerosene Guedexfh Rfepfx Aaboh Quiet performance – only 32 dB No exhaust fumes – no unpleasant burning smell Complies with the latest EU emissions directive Automatic restart after power failures Preheater Easy maintenance – removable fuel tank and back panel, plus integrated hour meter For larger models (DHOE-250F/350F/500F), a powerful fan ensures optimal distribution of hot air in big rooms and halls. Included with every unit: Remote control, free extra fuel filter, user manual, and an extended fuel line. The only brand on the market offering a wide range of models for different room sizes. Powerful heaters designed for large industrial halls (DHOE-250F/350F/500F)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters Gsdjq Hu Afjpfx Aabsuh G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Gsdpfxemqtzcj Aabsuh Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button Gsdpfof N Nlvjx Aabeuh • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm Guedpfx Aasf N Nk Hebsh • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• Godegn Hcbopfx Aabjuh • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 420mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”