Used Cycle Control for sale (47,351)

Condition: good (used), Year of construction: 2003, Boehringer DUS 560 ti, year of manufacture 2003, Siemens Manual Turn control, turning length 2300 mm, turning diameter 400 mm, turning diameter without bed carriage, tailstock, steady rest 300 mm, spindle bore up to 65 mm, spindle speed up to 3,300 rpm, Parat 4-position tool holder. Dodsyg Iwispfx Afpocc

Condition: good (used), spindle bore: 130 mm, turning diameter: 560 mm, swing diameter over bed slide: 560 mm, spindle motor power: 31 W, overall weight: 14,500 kg, Direct three-phase drive, three-phase servo drives for feed axes, 12 tools per turret, hydraulic full clamping cylinder. Siemens 840 D. For further information, see photo. Dcsdpsyf Dq Asfx Afpoc

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts Dcsdoxn Apbopfx Afpsc 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Dedpjuzyw Dsfx Afpscc Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: new, functionality: fully functional, turning diameter over cross slide: 250 mm, spindle bore: 58 mm, turning length: 930 mm, turning diameter over bed slide: 460 mm, quill stroke: 127 mm, quill diameter: 68 mm, center height: 230 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, spindle speed (min.): 40 rpm, spindle speed (max.): 3,000 rpm, bed width: 300 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 1,850 kg, torque: 1,012 Nm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, workpiece weight between centers: 350 g, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 460 mm Center distance: 930 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 14/10 kW (AC drive) Max. Torque: 1012 Nm Spindle holder DIN 55029: Camlock D6 Spindle bore: 58 mm Including equipment a.o: - Siemens AC servo motors - Siemens supply and amplifier modules - Manual 3-stage gearbox - Multifix B type steel holder head - Processing area covered by 2 sliding doors Dedpfeu T Ippjx Afpecc and additional chuck protection for open operation - Chip tray can be pulled out to the front - Manual tailstock - Rotating center point - Coolant system

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U Dcedpfx Afjw Rkt Iopsc cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe direct from the manufacturer. L44 CNC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Djdpfxsw Ea Tuo Afpocc Width/depth max. 2300 mm Length approx. 2530 mm Width/depth approx. 1595 mm Height approx. 1795 mm Weight approx. 2600 kg Working areas Lathe chuck diameter 150 mm Lathe chuck Hydraulic control of the clamping movement Center height 223 mm Center width 850 mm Swing diameter over machine bed 446 mm Swing diameter in the bed bridge 520 mm Swing diameter over cross slide 240 mm Bed width 300 mm Motor torque X-axis 6 Nm Z-axis 8.5 Nm Speed range Number of speed ranges 1 Speed range 10 - 3000 min¯¹ Electrical data Drive motor power 7 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 23 kVA Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Hydraulic system Motor output 0.75 kW Tank capacity 50 l Coolant system Coolant pump output 270 W Tank capacity 90 l Machine data Chuck opening diameter 40 mm Motor(s) Torque drive motor 33 Nm Tailstock Mounting MK 4 Quill stroke 165 mm Quill diameter 52 mm Spindle Spindle holder DIN ISO 702-1 No. 5 Spindle bore/bar passage diameter 52 mm Control system Type Sinumerik 828D PPU 240 System software SW 24 CNC memory 3 MB Look Ahead 50 Block change time 3 ms Number of tools 128 Travel distance X-axis 250 mm Z-axis 760 mm Vertical spindle Power drive motor continuous operation S1 7 kW Power drive motor S6-30 % operation 16 kW Drive motor torque 33 Nm Drive motor S6-30 % operation 80 Nm Feed rate Speed X-axis 15000 mm/min Z-axis 15000 mm/min Feed force Feed force X-axis 7.5 kN Feed force Z-axis 5.3 kN Tool changer Hydraulic type; VDI 30 Number of tool positions 8 pcs Mounting height, width square max. 20 x 20 mm Boring bar mounting diameter max. 25 mm SIEMENS SAFETY INTEGRATED Equipment Main spindle - Solid design Machine bed - Heavily ribbed - High rigidity and durability Guideways - Stable flat bed guide Recirculating ball screw - For high rapid traverse speeds in all axes - Less wear and tear - For high positioning and repeat accuracy Cast body - Hardened HRC48-52 and heat-treated Machine feet - Six pieces - Optimum alignment of the machine Heat exchanger - Closed switch cabinet with intelligent cooling management - Optimum temperature even at high outside temperatures Tool changing system - Eight tool stations - Hydraulic VDI30 tool changer - Pick-up height max. 20 mm Hydraulic unit - Motor power 750 W - Tank capacity 50 liters - Clamping pressure / operating pressure 2,500 - 2,942 kPa Three-jaw chuck - Hydraulic three-jaw lathe chuck Ø 150 mm - Hydraulic loosening and clamping via foot switch - Simple clamping of workpieces - Hard and soft block jaws Central lubrication system - Automatic supply at intervals - Reduces wear on bearings, ledges and ball screws - With float switch. An acoustic signal sounds if the oil level is too low

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: AC, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, travel distance X-axis: 330 mm, travel distance Z-axis: 2,130 mm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine including delivery and assembly: 119,500.00 EUR!!!!! Machine is available immediately and NEW. Unloading of the machine and installation on site by the buyer. Machine details: · Milltronics 9000-DGI CNC control · 15" LCD color touchscreen · Ethernet interface · USB interface · Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI desktop · Connection for external keyboard · Electronic handwheels for manual operation, teaching or automatic operation · Personalized macros available · Override potentiometers for axes and spindle · Spindle load control · Key switch to lock the EDIT function · Lights to display the operating status · Additional "M" function with CNC waiting channel · Constant cutting speed · Rigid tapping · Spindle speed 30 - 1600 rpm · Spindle motor 18 / 11 kW 2-stage electronic gear · Spindle nose type A1-11 · Tool turret with 8 positions 25 mm · One axial tool holder for standard tools 25 mm x 25 mm · One tool holder for 38 mm boring bars · Automatic lubrication system · Full enclosure with sliding doors · Coolant system with pump · CE certification · Instruction manual, spare parts list and wiring diagrams in digital format · Operating manual and maintenance manual in digital format · Transformer for standard industrial power network with 400 volts, 3 phases · Brackets for lifting the machine with a crane Optional accessories: Manual three-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic three-jaw chuck with hydraulic unit ( diameter 300 mm - bore 70 mm ) Fixed steady rest with rollers range 20 - 200 mm Fixed steady rest with rollers range 180 - 410 mm Traveling steady rest Brass supports range 20 mm - 200 mm Dcsdpfx Asyf Hnqefpsc 38mm Boring bar holder for turret 25mm Axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 65 mm, turning diameter over bed slide: 475 mm, turning diameter over top slide: 240 mm, quill stroke: 150 mm, quill diameter: 80 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 100 rpm, spindle speed (max.): 2,600 rpm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 3,890 mm, total width: 2,145 mm, total height: 2,375 mm, type of input current: AC, spindle motor power: 11,000 W, overall weight: 3,850 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 2,600 rpm, torque: 305 Nm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,600 mm, Turning diameter in gap: 710 mm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, nominal power (apparent): 24 kVA, number of spindles: 1, spindle nose: D1-6, tailstock quill diameter: 80 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine including delivery and assembly: 119,500.00 EUR!!!!! Machine is available immediately and NEW. Unloading of the machine and installation on site by the buyer. Machine details: · Milltronics 9000-DGI CNC control Djdpfx Afoyf Hm Topjcc · 15" LCD color touchscreen · Ethernet interface · USB interface · Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI desktop · Connection for external keyboard · Electronic handwheels for manual operation, teaching or automatic operation · Personalized macros available · Override potentiometers for axes and spindle · Spindle load control · Key switch to lock the EDIT function · Lights to display the operating status · Additional "M" function with CNC waiting channel · Constant cutting speed · Rigid tapping · Spindle speed 30 - 1600 rpm · Spindle motor 18 / 11 kW 2-stage electronic gear · Spindle nose type A1-11 · Tool turret with 8 positions 25 mm · One axial tool holder for standard tools 25 mm x 25 mm · One tool holder for 38 mm boring bars · Automatic lubrication system · Full enclosure with sliding doors · Coolant system with pump · CE certification · Instruction manual, spare parts list and wiring diagrams in digital format · Operating manual and maintenance manual in digital format · Transformer for standard industrial power network with 400 volts, 3 phases · Brackets for lifting the machine with a crane Optional accessories: Manual three-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic three-jaw chuck with hydraulic unit ( diameter 300 mm - bore 70 mm ) Fixed steady rest with rollers range 20 - 200 mm Fixed steady rest with rollers range 180 - 410 mm Traveling steady rest Brass supports range 20 mm - 200 mm 38mm Boring bar holder for turret 25mm Axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: used, Year of construction: 1988, turning diameter 570 mm turning length 2000 mm control ja Dcedpjx U A Utjfx Afpsc weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 Dcjdpfx Afew Syb Depjc x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Dcjdpfx Afjw Syd Sjpjc Handwheel defective

Condition: good (used), CNC Cycle Lathe Stock number: 3069 Make: Kern Year of manufacture: 2007 Type / Model: CD480 Machine no.: 3211.07 Control system: Heidenhain Manual Plus 4110-2 Centre distance: 1,500 mm Spindle bore: 78 mm Centre height: 240 mm Swing diameter over bed: 520 mm over cross slide: 305 mm Djdeyfgb Ropfx Afpscc Cross slide travel (plan): 260 mm Speed range: 1 to 3,000 rpm Longitudinal feed: 0.001 to 2.000 mm/rev Cross feed: 0.001 to 1.000 mm/rev Rapid traverse longitudinal: 10 m/min Rapid traverse cross: 5 m/min Tailstock taper: MK5 Quill travel: 120 mm Connected load: 25 kW Accessories/Equipment: Multifix C; Operating manual Condition: good Weight: 3.1 t Dimensions: 3,300 x 1,700 x 1,800 mm

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Dodpfx Asx Sw Dwefpjcc Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: excellent (used), Year of construction: 2006, turning diameter 330 mm turning length 750 mm control WEILER D3 dia. of quill 50 mm quill stroke 130 mm taper in tailstock-quill MK-3 spindle turning speed range 1-4500 U/min taper in main spindle MK-5 weight of the machine ca. 1400 kg dimensions of the machine ca. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very good condition and can be viewed by arrangement with the seller. - Lever quick-release chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle - Live steady with sliding jaws, passage 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, with mounting according to DIN 55027 /5, with 1 set of basic jaws and hard reversible attachment jaws - Lever quick-action chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. Dsdsx Szpwopfx Afpecc - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle Translated with (free version)

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 700 mm, spindle bore: 150 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, capacity 3000x1000 mm 2-axis DRO spindle bore 130 mm steadies Djdpex Itpbofx Afpjcc 4-jaw chuck rapid traverses

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function Dcsdpfex Akm Rex Afpec • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: used, Year of construction: 2010, Technical details: Dcodpfx Aor U Skhjfpsc turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor *

Condition: used, Year of construction: 2007, Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Dcodpfx Aeydfq Iofpec Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm Dcedpfx Aoydfqzjfpsc Turning diameter: 280 mm Turning length: 600 mm

Condition: good (used), Year of construction: 2013, operating hours: 12,000 h, functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 3,000 mm, turning diameter: 554 mm, center width: 3,000 mm, turning diameter over top slide: 370 mm, overall weight: 4,000 kg, chuck outer diameter: 315 mm, Equipment: chip conveyor, We are offering this well-maintained Alpha Colchester Alpha cycle-controlled lathe, year of manufacture 2013. Manufacturer: Alpha Model: Colchester Alpha Year of manufacture: 2013 Condition: good Category ID: 1616 Type ID: 2488 Machine type: cycle-controlled lathe Dcsdpfjydkanjx Afpjc If you have any questions or need further information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened Dcjdow E Nkijpfx Afpjc -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: used, Year of construction: 2008, Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Tool holder Number of tool stations: 12 Dcsdpfxsya Iire Afpec Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Coolant unit Contents: 210 l Pump capacity: 1,7 kW Feed rate at 6 bar: 20 l/min Electrical energy requirement Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min Dodpfxjxygdye Afpocc • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor power: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolholder system Dsdpfxoycf Rxs Afpjcc Documentation and accessories Machine is powered up for inspection