Used Cycle Lathe for sale (8,373)

Condition: excellent (used), Year of construction: 2017, Universal lathe Seiger SLZ-620E Machine no. 4758 Year of manufacture 2017 Control system Siemens 840D Solution Line with Operate user interface (incl. Ethernet interface) Distance between centers 2000mm Swinging diameter over bed 660mm Swinging diameter over cross slide 435mm Travel of cross slide 375mm (position measurement via glass scale) Headstock according to DIN55027 GR.8 Spindle diameter in front bearing 130mm Spindle bore 93mm Main spindle internal taper 100 Drive power 60/100% ED 30/22kW Spindle speed 1-2500 rpm Max. torque at the spindle approx. 2000 Nm Feed force Z-axis 14,000 N Feed force X-axis 10,000 N Feed range longitudinal and transverse mm/rev Rapid traverse speed X/Z 10/8 m/min Tailstock MK5 Quill travel 180mm Quill diameter 90mm Workpiece weight between centers 1000kg Workpiece weight in chuck (overhanging) 500kg Machine weight approx. 4900kg Machine dimensions L x W x H 4,100/2,350/1,900 Accessories/Equipment: - 3-jaw chuck D320mm - 15 tool holders - "Drill stand" drill rod clamping device D60mm - Chip guard and adjustable protective cover with viewing window - Machine lamp - Coolant system (coolant pump reinforced, 5.4 bar) Nljdpfx Ajzgrtgjlhoc - Parat 4-position turret (manually operated) - Glass scale X-axis - Documentation - Chip conveyor - Manual flushing gun - 1x steady rest clamping range 20mm to 150mm - 1x steady rest clamping range 120mm to 270mm The machine is in very good condition.

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm Nsdpfezhcfvsx Alholc quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 Nlsdpjzgigdjfx Alhsc control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,891 h, functionality: fully functional, CNC lathe – cycle-controlled with turret | Brand: DMT Kern Type: CD 322 | Year of manufacture: 2010 5 axes (X+Z+C-axis, main spindle, driven tool) The machine can be inspected under power by prior appointment. The machine was used exclusively for training purposes. Condition: Fully functional / ready for operation (well-kept condition). Operating hours (June 19, 2026): 5.891 h TECHNICAL SPECIFICATIONS: Working range: - Swivel diameter over bed: 320 - Swivel diameter over cross slide: 150 mm - Cross slide travel: 200 mm Centre distance: - Longitudinal slide travel: 750 mm Main spindle drive: - Power: Digital AC motor – 50/60/100% duty cycle: 16/15/12 kW - Number of gear stages: 2 Spindle head: - Spindle head DIN 55027 / Bore: Size 6/Ø 64 mm - Spindle Ø at front bearing: Ø 100 mm - Speed range (constant V): 1 – 3.000 rpm - Standard chuck sizes: 200/250 mm Cross slide: - Transverse feed range: 0,001 – 1.000 mm/rev - Longitudinal feed range and thread pitches: 0,001 – 2.000 mm/rev - Transverse rapid traverse: 5 m/min - Longitudinal rapid traverse: 10 m/min - Transverse feed force: 5.000 N - Longitudinal feed force: 7.000 N Tailstock: - Quill diameter: Ø 60 mm - Quill travel: 140 mm - Tool holder taper: MK 4 Electrical specifications: Three-phase current: 400 V, 50 Hz Dimensions / Weight: - Machine Length/Width/Height: 2,44 x 1,66 x 1,7 m - Control cabinet Length/Width/Height: 1,2 x 0,5 x 1,7 m Nledpozf Nktefx Alhoc - Machine weight: approx. 2,1 tons EQUIPMENT / ACCESSORIES: - CNC control: HEIDENHAIN MANUALplus 620 - Automatic 8-position tool disc turret * Tool holder DIN 69880, Ø 30 mm, mounted on the rear cross slide, plus Multifix B at the front * Drive speed adjustable, max. 4.000 rpm - C-axis with drilling, milling and engraving cycles and free ICP input - Axial and radial tool holders for driven tools: * Shank to DIN 69880, Ø 30 mm * With collet chuck to DIN 6499, 430E * Clamping range 1–16 mm - Collet chucks for driven tool holders * with DIN 69880 shank, Ø 30 mm * Clamping range 1–16 mm in 1 mm increments - 1 set of tool holders to DIN 69880, Ø 30 mm - Mk 4 rotating centre point - Tailstock roller guide (for easier movement of the tailstock) - Oil sump - Flushing gun - Coolant pump, frequency-controlled (instead of standard pump) * Manually infinitely adjustable via a selector switch on the machine control panel from 1 bar/10 l/min – 4 bar/20 l/min - Oil skimmer for coolant cleaning - Second chip protection door - Special cladding, machine fully enclosed on the right-hand side - Oil-emulsion mist filter for the working area extraction system - Main motor fan control, temperature-controlled - Operating mode 4 “Process monitoring” for 5 axes, (X+Z+C axes, main spindle, driven tool) - Coolant system, pump capacity 1 bar, 8 l/min - Brake on the main spindle for changing jaws/chucks - Axial stop in the main spindle - Collet clamping device, for steel compression collets * max. 4.000 rpm * DIN 55027 shank, size 5, clamping range: Ø 3–42 mm - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Diameter over lathe bed: 410 mm Spindle bore: 54 mm Taper for tailstock: MK 4 Nsdpfx Alszd S Dashslc Machine weight: approx. 2.1 tons Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Includes: Live center

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min Nedpfx Aoymp Suelhjlc thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. thread - module mm main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 79430 € 1501.23 € Nlsdpfx Aswirn Sjlhoc 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 78 030,00 mm € 81030,00 mm € 84130,00 mm € 87330,00 mm € 90630,00

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm Nlodpfx Aszd Sg Iolhsc turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Nlsdpfx Alozdn S Hjhsc Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Lathe - cycle controled | Brand: FAT-HACO / Type: TUR 800 MN / Year of construction: 2001, General overhaul in 2009, Replacement in 2010 The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe. The TUR MN is a production machine for complex parts as a single piece or in small quantities with high precision. The machine can be inspected in the factory under power by appointment. Condition: Fully functional / ready for use. The general overhaul in 2009 included the following work: - Machine completely dismantled, cleaned and remounted, - Maintenance of the gear box, - Machine bed have been grinded, - Upper bed has been scraped by hands, - Measuring and adjusting the headstock - Measuring and adjusting the plan and longitudinal slide Replacement in 2010: Ball screw renewed. TECHNICAL SPECIFICATIONS: - Control: SIEMENS SINUMERIK 840D ManualTurn - Swing diameter over bed max.: 800 mm - Swing diameter over support max.: 480 mm - Distance between centers (turning length)max.: 4.000 mm - Centre height: 250 mm Headstock: Nsdpfszamkzex Alhslc - Spindle cone (metric cone): 150 - Bore through the spindle: 140 mm - Spindle speed: 5 - 1.800 rpm - Spindle speed I: 5 -360 rpm at N = const.: 90 - 360 rpm - Spindle speed II: 360 - 1.800 rpm at N = const.: 360 - 1.800 rpm Feeds: Type of the feed drives - servo drives: - Gradient of the leading spindle (Z/X): 10 mm - Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min - Feed force of the longitudinal feed (Z) max.: 15.000 N - Feed force of the crossfeed (X) max.: 10.000 N - Adjustment range of the cross slide (X): 480 mm - Range of the bedway: 544 mm Cross slide: - Width of the cross slide: 330 mm Tailstock: - Permitted workpiece weight max.: 3 tons - Tailstock quill - morse taper: 6 MT - Diameter of the tailstock quill: 125 mm - Tailstock sleeve stroke manuell: 280 mm Drive motor feed rate for X/Z-axis: - Nominal torque Mn = 15,5 Nm - Nominal speed Nn = 3.000 rpm Total power requirement: 39,5 kW Machine weight approx.: 9,3 tons Dimensions of the machine: Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s approx. 1.400 mm shorter) Width: 2.500 mm Height: 2.200 mm SPECIFICATIONS / ACCESSORIES: - 1 steady rest, Ø: 30 - 340 mm - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055, 8-position tool turret VDI 40, constant cutting speed, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height 325 mm Distance between centers 4000 mm Swinging diameter over bed 650 mm Swinging diameter over cross slide 410 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Njdpfezfqdnox Alhslc Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions L x W x H 6190 x 2096 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR 8055 with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • 3-jaw chuck • 8-position tool turret VDI 40 • Chip conveyor • 2 fixed steady rests • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • Chip conveyor • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor Nlsdpfx Aor U Skhelhec *

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm control NUM Type 1062 T total power requirement 12,5 kW weight of the machine ca. 5500 kg Nlsdpfx Ast Hw Szslhsc dimensions of the machine ca. m

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW Nedpfxsugawfe Alholc weight of the machine ca. 3,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Nsdpfx Aszdp Txslhjlc Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm Njdpfx Aley Hfy Aohjlc - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: ready for operation (used), Year of construction: 2006, spindle bore: 130 mm, turning length: 600 mm, turning diameter: 1,800 mm, Turning diameter 1800 mm Turning length 600 mm Control Siemens 840 D Powerline 6-jaw chuck Spindle bore 130 mm Spindle nose DIN 55027 size 11 Spindle speed range 1 - 400 rpm Spindle torque 9000 Nm Nlodpfjy Aw Svsx Alhjc Total power requirement 38 / 52 kW Machine weight approx. 25 t

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Nodpfx Alju A Ducehelc Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Nlsdpfx Aewftdmolhsc Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: good (used), Year of construction: 1986, turning length: 5,000 mm, turning diameter: 1,320 mm, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Nlsdszgchzjpfx Alhoc Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: excellent (used), Year of construction: 2018, operating hours: 4,788 h, functionality: fully functional, machine/vehicle number: NB01, spindle bore: 83 mm, turning length: 1,000 mm, center width: 350 mm, turning diameter over bed slide: 570 mm, bed width: 350 mm, total length: 2,850 mm, total width: 2,400 mm, total height: 1,800 mm, overall weight: 3,800 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 250 mm, torque: 1,300 Nm, The machine is still available for inspection in the factory while powered on and is in like-new condition. Complete technical data is attached in the PDF. Used CNC cycle turning machine CONTROL: SIEMENS SINUMERIK 840 D SL Manufacturer: WEILER Model: E 50 HD x 1000 Machine number: NB01 Operating hours: 4788h Technical data Working range, center distance mm 1000 Swinging diameter over bed mm 570 Swinging diameter over cross slide mm 340 Travel of cross slide mm 340 Bed width mm 350 Turning tool cross-section (height x width) mm 32 x 25 Turning spindle, spindle head according to DIN 55027 (DIN ISO 702-3), size 8 Spindle diameter in the front bearing mm 120 Spindle bore mm 83 Internal taper of the main spindle, metric 90 Main drive, AC drive with 2-stage gearbox Drive power 60% / 100% ED kW 20 / 17 Total speed range 1/min 1-2500 Speed range, gearbox stage I 1/min 1-625 Speed range, gearbox stage II 1/min 4-2500 Max. torque on the spindle Nm 1300 Feed range, AC servo drives Feed force, longitudinal N 12000 Feed force, transverse N 10000 Feed rate, longitudinal and transverse mm/rev 0.001-50 Time feed mm/min 0.001-10000 Max. rapid traverse speed, longitudinal / transverse m/min 10/7 / 5 Thread cutting range, metric threads mm 0.1-2000 Inch threads pitches/inch 112-1/64 Module threads mm 0.05-56 DP threads DP 448-0.05 Number of thread starts max. 360 Tailstock, ram diameter mm 80 Nledpfx Alezg Ed Sohjc Ram travel mm 200 Internal taper of the ram MK 5 Machine weight without attachments kg 3800 Dimensions, length / width / height, center distance 1000 mm 2850 x 2400 x 1800 (without chip conveyor) Standard color, machine frame light gray RAL 7035 Machine base / bed / slide basalt gray RAL 7012 Control panel, white aluminum RAL 9006 Slide panel, blue NCS S 4550-R80B

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 Nedpfx Aszcmccelhjlc weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 U/min feeds - cross 0,001 - 1000 mm/U feeds - longitudinal 0,001 - 2000 mm/U rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t Additional information * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2 * Roller guide for easier movement of the tailstock Nlsdpjzclhdsfx Alhjc * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: good (used), Year of construction: 1999, NEF520 Nledpoy S Eu Rofx Alhoc year of manufacture 1999

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device Nlsdpfx Aou Ix Izolhec incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *