Used Damper for sale (425)

Condition: good (used), Year of construction: 2016, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device Lsdpfszuawvex Ag Aeaf -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK-EU -Dimensions: 470/500/H420 mm -Weight: 18.4 kg

Condition: good (used), Year of construction: 2011, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK Lajdpfx Agezuau Ue Ajf -Dimensions: 390/390/500 mm -Weight: 16.9 kg

Condition: used, Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/weishaupt, actuator for air dampers and gas dampers Laodpfogg Tgyjx Ag Asf -Type: SQM45.291A9WH -Dimensions: 135/130/85 mm -Weight: 1.0 kg

Condition: good (used), Rotary actuator for air dampers, air damper rotary actuator -Manufacturer: Siemens -Type: GDB331.1E -Number: 24x rotary drives available -Price: per piece Laodpfxed Dcf Ns Ag Aof -Dimensions: 140/70/H60 mm -Weight: 0.8 kg

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/Landis & Staefa, air damper actuator -Type: SQN75.6K4A11 -Voltage: 110 V -Number: 2 pieces available -Price: per piece -Dimension box: 155/110/70 mm -Weight: 0.4 kg/piece Ledpfx Agogg Tf Ro Ajaf

Year of construction: 2013, condition: like new (used), we sale 3 fire dampers for the isolation of duct penetrations between fire compartments: 1. TROX Technik FKR-01/02-90K, 510x600, year of manufacture 2013. 2. TROX Technik FKR-01/02-90K, 630x600/Z42, year of manufacture 2013. 3. SCHMIDLIN K90, 310x700, year of manufacture 2003 Ledjg Rpibjpfx Ag Aoaf sale in current condition as seen. All are dismantled properly FCA Oradea, Romania

Condition: used, Outer diameter: 315 mm Overall height: 70 mm Length of adjusting screws: 200 mm Ledpfx Ajbx Eiueg Ajaf Thread: M 30 x 2 Permissible maximum static load: 11000 kp Maximum load (general): 8000 kp

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Lodpfx Ajyhxmzsg Ajaf Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Year of construction: 2023, condition: new, Brand: SAMMET Type: On/Off Damper Serial Number: 23012‑2129521 Weight: 47 kg Size: DN400 (circular butterfly damper) Manufactured: June 2023 Tag: HS‑270‑800 Configuration: LIN mounting (Sammet-specific orientation/positioning) SAMMET On/Off Damper DN400 1. Product Description SAMMET® On/Off Circular Industrial Damper – DN400, designed for the isolation or full opening of air or process gas ducts. Intended for use in sectors such as power generation, incineration, dust extraction, thermal processing, and industrial ventilation. 2. Technical Specifications 2.1. General Model: Circular On/Off Damper Nominal Diameter: DN400 Weight: 47 kg Construction: Painted steel, circular flanged frame Actuation: Butterfly disc operated by mechanical actuator Orientation: LIN (Sammet-specific configuration) Action type: Opening/closing Typical applications: Air flow, hot or dusty gases, process applications Performs well under moderate differential pressure Lsdpsyhxm Uofx Ag Aeaf Low pressure drop when fully open 3. Applications Power plants / industrial boilers Dust extraction systems (ESP, bag filters, etc.) Incineration & flue gas treatment Metallurgy, cement, petrochemical processes High-temperature industrial ventilation Air/gas circuits requiring simple but reliable isolation 4. Condition & Packaging Condition: New, never installed

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 315/80R22.5 R, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 160 l, color: white, emission class: euro5, Year of construction: 2023, Equipment: fridge, spoiler, = Additional options and accessories = - Immobiliser - Spare wheel - Spoilers - Sun visor = Remarks = Cabin type: Active Space Country of origin: Spain Displacement: 11,000cc Gcw: 44 Tons Dimension: 6,250 x 2,550 x 3,783 Ground clearance: 217 mm Steering: LH Construction: Tractor Head Gearbox type: TX-12M LIMITATION ON SL INFOTAINMENT ECOSWITCH PORTABLE SMOKING KIT FMS DATA INTERFACE AUTO A/C+LER JOST FIFTH WHEEL 220AH H PERF REVERSE BUZZER L-3-P NET U-COMF ROCKING MODE FULL LED HEADLAMPS 7+7 PIN TRAILER PLUG FRONT PARKING BRAKE WITH BUNK CURTAINS 120A SMART ALTERNAT Lodpsy Tymqsfx Ag Aeaf INDEP. C/E HEATER 6k STD GVW EQUIPMENT STANDARD AIR SUSP. SETTING TRAILER COUPL. - 2 LINE BRAKES STEEL WHEELS GREY IC444 CHASSIS SPEED LIMITER 90 KM/H DRIVE T. 315/80R22,5 SIDE MARKER LIGHT FRONT CORNER FINS JACK T INF HOSE PRES GAUG CAB AIR SUSPENSION UREA TANK 50 LITRES STANDARD AIRTANK PLATING STANDARD GEAR MODE 08329 SENZA ENG ID CUTOFF STD GREY PLAST. PART AS HIGH ROOF CAB FABRIC AIR SUSP. HEATED DRIVER LOWER EXHAUST PIPE STD SETTING C11/C13 FRONT ANTI-ROLL BAR FRONT UNDERRUN PROTECTION REAR ANTI-ROLL BAR 12TX 2420 TD GEARBOX HILL HOLDER REAR OVERHANG 1047,5 LOADS 7500-13000Kgs MECHANICAL BATTERY SWITCH 4-DIN UPPER SHELF FABRIC STA. 2 WAY ADJ. PASS ESP DIGITAL AXLE WEIGHT INDICATION AEBS Compliant FOGLIGHT CORNER+BEND MPH/KPH SPEEDOMETER WARNING TRIANGLE SUB-ARTIC PACK -30 ANTI-SIPHON 2 TANK AIR INTAKE DUSTY ENV FIRE EXTINGUISHER PROVISION HEATED ELECTRIC REAR MIRRORS High Efficiency A-PI RUSSIAN OMOLOGATION PLATE 5th W H=150 MP=50mm ROOF INSUL SUB-ARTIC BATTERY CHARGE LAMIN FUEL TANK 1160L ALUMINUM 1 UND FLOOR STORAGE ENGINE PLATE REAR AXLE RATIO 2.85 REAR AIR SUSPENSION ELECTRIC ROOF HATCH STANDARD CAB TRIM SOFT TOUCH FOAM STEERING WHEEL TRATTAM. PROT. STD VIN CODE CHECK DIGIT CURTAINS ON DOOR WINDOWS FUEL TANK HEATER WITHOUT STICK79239 (IT03-EN) FIRST AID KIT 352CC AIR COMPRESSOR STEEL AIR TANKS APU FREE DISCHARGE HORIZ BATT SIDE FRAM MANUAL CAB TILT STANDARD REVERSE VERTICAL AIR FILTER ENG RPM = 1900 REV/ 5th W EC POSI06139 FRONT PARABOLIC SUSP REAR DAMPERS FILTER HP TRA/HEATED ECO-ROLL ELECTRIC HORN BULB REAR LIGHTS EMISSION EURO V W/O AMBIENCE LIGHTIN STANDARD CATWALK Radice VIN WJM = More information = Tyre size: 315/80R22.5 R Number of cylinders: 6

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 20497- Tyres 12.00R20, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 550 l, color: white, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, EBS, cruise control, electric window regulation, fog lights, = Additional options and accessories = - Sun visor = Remarks = Cabin type: All Time (sleeper cabin) Country of origin: Spain Displacement: 9,000cc Dimension: 9,100 x 2,550 x 3,100 Ground clearance: Front - 337 Rear - 311 Brakes: Drum Brakes (Front/Rear) Lasdsy Tyhzspfx Ag Asf Steering: LH Drive Construction: Chassis Gearbox type: TX-16M Type: AT380T43H Colour: 50105- White IC 194 Shipping Dimension: 8.3x2.55x3.10 m Chassis Length: 5.8 meters approx Provision Radio Dab Orlandi Tow Hook Towing Version Eco-roll Loads 7500-13000-13000kg Drive tire 12.00R20 FMS Data interface Batteries 220Ah Rear dampers Reverse Buzzer Cross member D=200 KN 7+7 Pin trailer plug Automatic 45mm D=200 KN Front multileaf susp Wheel chocks (2) Headlight protection Rear Overhang 1990mm Pneum. Horn-Chassis Curtains on door windows Standard gear mode 08329 Steel front bumper Front anti-roll bar Rear multileaf susp Tyre inflation hose Vin code check digit Warning triangle Del. Heated screen Radice VIN WJM STD setting C11/C13 Safety Hor. Filter Cartridge Horizontal Air Filter 630cc Air Compressor Steel Air Tank Alternator 90A/24V APU Free discharge Horiz batt side fram Standard gray plastic part Mechanical cab suspension Manual cab tilting At low roof cab Del. package tray Temperature countries preparation With door sticker (IT03-EN) Fabric air susp driver seat Ecoswitch Limitation on SL Lower exhaust pipe Engine Speed 1900rpm Del. Front underrun protection S disp oper ped post Grey IC444 chassis Standard cab trim Speed limiter 90km/h Soft touch foam steering wheel MPH/KPH Speedometer Pre-heater Trattam. = More information = Tyre size: 20497- Tyres 12.00R20 Suspension: leaf suspension Empty weight: 9.000 kg Carrying capacity: 24.500 kg GVW: 33.500 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 12.00R20, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - LED headlights - Spare wheel - Sun visor = Remarks = Cabin type: Sleeper - Active Time Country of origin: SPAIN Displacement: 12,900cc Gcw: 120 Tons Brakes: Drum , Air Dual circuit Steering: LH Construction: Tractor Head Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar Ledsy Tydvjpfx Ag Aoaf = More information = Tyre size: 12.00R20 Number of cylinders: 6 Engine capacity: 12.900 cc Empty weight: 9.980 kg

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring Ledpfx Aszvz Tbeg Aoaf - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Lodpfx Aozu Ah Dsg Ajaf Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop:

Condition: used, Year of construction: 2018, Dust extraction system Manufacturer: Nawara Type: RUBIN 2030 Year of manufacture: 2018 Technical data Application: - Designed for the extraction of dry dust and wood shavings - Suitable for woodworking and industrial dust extraction Performance: - Airflow rate: approx. 30,000 m³/h System features: - Stationary modular filter system - Warm air recovery system (summer/winter operation with adjustable damper) - Designed for continuous operation Compliance: - Complies with EU Machinery Directive 2006/42/EC - Complies with ATEX Directive 2014/34/EU (for potentially explosive atmospheres) - Meets the relevant Polish regulations on machine safety Air lock / discharge system: - Type: SL 1400 EX - Length: 1400 mm - Height: 360 mm - Connecting frame (top/bottom): 1490 x 420 mm - Drive type: Direct drive with elastic coupling (Rotex 38) - Gear motor: SEW R47 DRN80MK4 (Option: DRN90S4) - Speed: 15 rpm (Option: 29 rpm) Lodpezuz S Uefx Ag Ajaf Electrical data: - Power supply: 380 V / 50 Hz Dimensions (air lock unit): - L W H: 2000 x 420 x 360 mm Installation: - Complete external filter system included in the scope of supply - Internal piping within the factory included in the scope of supply, but subject to separate negotiations Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Laodpfx Aey Tqwyeg Aef Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, diameter // mm Cutting (quantity) / weight / kg BW-FIXATORS BWF RK 5 - NEW 17 pieces Available immediately Price per piece 300,00€ plus VAT. Condition: NEW Laodpfouap Ugsx Ag Aef Included in delivery: 1x BWF RK V Fixator

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap Lsdpfx Asn Smbreg Aeaf - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve Lajdpfx Agen Smcle Aof - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW Lsdpfx Ajztvwisg Asaf - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: good (used), Machine foot, machine feet, spring elements, silent blocks, vibration dampers, steel spring vibration dampers, vibration isolators, hydraulic mounts, engine mounts, rubber buffers -Spring elements: Vibration damper, hydraulic mount / engine mount (4 pieces) -Spring element: Ø 200 mm -Total height: 60 mm -Hole: Ø 42 mm Ledpfx Agezt Ii Dj Aoaf -Submission/Price: complete -Dimensions: Ø 200 x 60 mm -Weight 3.1 kg/piece

Condition: good (used), Machine foot, machine feet, spring elements, silent blocks, vibration dampers, steel spring vibration dampers, vibration isolators -Spring elements: 2 steel spring vibration dampers for machine tools and systems -Spring element: Ø 128 mm -Total height: 215 mm Ljdpfx Agozt Igcs Ajaf -Submission/Price: complete -Dimensions: Ø 128 x 215 mm -Weight 4.8 kg/piece

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Laedpfxoztmzxs Ag Aef Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Lasdpeztmvvofx Ag Aef Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Year of construction: 2025, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Laedpfjzqtnyox Ag Ajf Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.