Used Fans for sale (2,458)

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE Chodpfx Ajzw Ucxepteb

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Cedpezw Ug Rjfx Aptshb Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient. This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled. Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate. Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified. What the specifications mean in practice: • 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust. • 223-250 daPa total pressure increase - maintains material flow over distance and through bends. • Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts. • 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation. • Mobile, liftable base frame - can be moved into position using a forklift or crane. • Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air. What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection. Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified. Technical data (from nameplate): Cedpfezx Ebzsx Aptehb Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009 Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg Condition: Used, functional, previously used for pneumatic material conveying. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase. Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock. First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold. Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 1999, Second-hand fan Centrifugal fan with V-belt drive Suitable for use in both raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection: 300 mm Motor power 11 kW Air flow rate 7,000 m³/h Chedpfx Apszk Niyetsb Availability: at short notice Storage location: Röllbach

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Chjdpfx Apevu Hrketeb Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: excellent (used), For sale is a powerful, industrial radial fan from the renowned Italian brand Euroventilatori International S.p.A. This machine stands out for its high-quality construction and ATEX certification, meaning it is suitable for use in potentially explosive environments (e.g., dust extraction in woodworking plants, paint shops, or the chemical industry). ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Euroventilatori International S.p.A. (Italy) Csdpfx Aszp Alfoptjhb Fan Type: TH 1002/A LG315 ES4 Year of Manufacture: 2010 Serial Number: X100638 Motor Power: 37 kW Motor Type: 225S (4 poles / 50 Hz) Fan Speed: 1470 rpm ATEX Certificate: CE Ex II 3D c T125 (compliant with directive 94/9/EC) Permissible fluid temperature: from 15°C to 80°C Permissible ambient temperature: from -15°C to 40°C Reference documentation: SAXN1010 🛠️ ADVANTAGES AND APPLICATIONS: Operational Safety (ATEX): The fan meets stringent explosion-proof standards for dust zones (3D). Ideal for extensive dust extraction systems, silos, and filters where there is a risk of dust ignition (e.g., wood dust). High Performance: A 37 kW motor guarantees enormous suction and discharge force, allowing it to handle entire production lines or extensive ventilation systems. Italian Reliability: Euroventilatori is one of the leading European manufacturers of industrial fans, guaranteeing a robust construction and long-lasting, trouble-free continuous operation. Durability: Designed for the transport of dusty air in harsh industrial conditions. 📍 ADDITIONAL INFORMATION: Condition: Used, fully functional. The machine is ready to be implemented in a demanding production environment.

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Year of manufacture: 2018 Power: 30 kW Cedpezn Ulbsfx Aptjhb Maximum speed: 2700 rpm Voltage: 3×400 V If you have any questions or require further information, please do not hesitate to contact us via message or phone. The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. The machine is located in 59823 Arnsberg.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Fan RW No. 2 Volume m³/h: 7,120 Chodpjwu A H Nsfx Aptjb Drive kW: 7.5 / V400 / Hz50 Pressure Pa: 1,977 Inlet diameter: 295 mm Outlet diameter: 300 mm Open impeller New V-belts New bearings

Condition: used, Centrifugal fan, Fan, Exhaust fan, HRV 56N-400/M GL 360, used machine Manufacturer: Venti Oelde Cedszwz Tdspfx Aptehb Type: HRV 56N-400/M GL 360 Overall dimensions: 1050 × 1120 × 1010 mm Weight: 280 kg Airflow capacity: 14,400 m³/h Year: 2014 Electrical data: 22 kW, 400 V, 50 Hz, 39 A

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Chodpfx Aoticdleptsb Mass: 350

Condition: used, Year of construction: 2011, Used machine Year of manufacture 2011 Equipment and technical data: - Transport fan - 22 kW - Motor 22 kW - 400 V - 2955 rpm - Volume flow 9000 m³/h - 4500 Pa - suitable for dust and chips - freely positionable installation - motor block at the side - direct drive - open impeller design - suction port 400 mm; extended to 450 mm - with flange ring - pressure port 400 mm; extended to 450 mm - with flange ring - Dimensions approx. 1200 x 1100 x 1350 mm Cedpozlbtgofx Aptshb - Weight approx. 880 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, No. 11 Fans for fine paint dust or similar Csdpfxsxywrzj Aptehb

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Chedpfjwin Eajx Aptjb Impeller diameter: 1200mm Impeller material: Operating pressure: 2.94kPa -- (300 water mm) Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Height 2500 x width:2000 x length:3000mm Weight:4400kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Chedpfx Aod Nqlcsptsb Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: used, Second-hand Schuko radial fan for wall mounting, for extracting wood dust, shavings and similar materials. Technical data: - Motor: 4 kW Chedpfozw Ewgsx Aptjb - Connection: 250 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Engine speed: 2,882 rpm Cedpfx Apezn Rfkstohb

Condition: used, Items: extraction fan and pipework for woodworking or similar purposes. Technical data: - Motor: 30 kW Chsdpjzrypaefx Aptob - Fan inlet: 350 mm - Pipes: approx. 12 running metres - Pipe diameter: 320 mm

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Chodpfx Apergqm Hstob Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch Csdpfx Apsg N Db Hstshb - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 7.5 kW – 400 V Csdozk N Uvjpfx Aptehb - 1,500 rpm - Extraction nozzle diameter 250/350 mm - Airflow 7,000 m³/h - 2,900 Pa - ATEX-certified for explosive dusts - Dimensions approx. 1,200 x 1,170 x 800 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Motor: 15 kW - 400 V - 3,000 rpm - Extraction nozzle diameter: 250/300 mm Csdjzk N Upspfx Aptjhb - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm Chedpsfrpnwjfx Aptob -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Chodpfx Apevxk Anjteb Storage location: Nattheim

Year of construction: 2007, operating hours: 0 h, condition: excellent (used), machine/vehicle number: 1202, FAN: TRA-BO TGR 710/T Cedpfx Asfm U Uvsptehb year of manufacture 2007 Support type: BLC 60-120 Wheelbase 580 Power 15 kW -4P Motor size:≤ML4 Maximum rotation speed ᐸ 100°C = 3150 100 ÷ 200°C = 2780 200 ÷ 300°C = 2500 ATEX MAX 60°C MAX rpm = 3.000 Belt: 4SPA1825 Absorbed power tolerance ± 3 % Noise tolerance + 3 dB Weight of ventilator in kgf 270 kgf The Fan cannot be revolved. Lp = sound pressure level between 68 dB/A and 89 dB/A Pd =discharge gauge pressure between 1 and 300 kgf/m2 Qv= flow rate between 1 and 10 m3/s or 1 and 35.000 m3/h The rest of the data can be found in the technical diagram attached. Price: 1.900 Euro + VAT, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Chodpfx Aozrypteptjb Technical data: - Motor power: 11 kW - Inlet: 350 mm - Outlet: 350 mm - Air flow rate: 9,770 m³/h