6
1 piece DC motor with gearbox
Make motor: Permo-Drive
Make gearbox: Flender
Motor: 0,55 KW,170VDC, 3,8A, n1=2400 1/min., operation mode S1
Power converter board with potentiometer:
Permo-Drive, PMP-IC 29, mains 220 VAC 50/60Hz, armature 170 VDC,
Bi38yk
rated current 5 A,fuse 10 A
Connection voltage: 220 V 50/60 Hz ( e.g. via Schuko plug )
Output shaft: D 25
Shaft height ( gear foot - shaft center ): 90 mm
The speed is infinitely variable via the potentiometer:
0-75 rpm.
5
DC motor, servo motor, gear motor, electric motor, direct current gear motor
-Speed: 30-3000 rpm
-Power: 0.07-7.5 KW
-Construction: B5
-Diameter shaft: Ø 50 mm
3pld7bm9
-Protection class: IP 44
-Number: 1x motors available
-Price: per piece
-Dimensions: 1160/370/H530 mm
-Weight: 222 kg
5
DC motor, servo motor, gear motor, electric motor, direct current gear motor
-Speed: 30-3000 rpm
-Power: 0.15-15 kW
-Construction: B5
-Diameter shaft: Ø 60 mm
S0xssub8m
-Protection class: IP 44
-Number: 1x motors available
-Price: per piece
-Dimensions: 1340/360/H580 mm
-Weight: 282 kg
5
Gear motor, electric motor, electric gear motor
-Manufacturer: Watt Drive, gear motor type HG OKG 71N4
-Speed: 246 rpm
H2oefu9kk
-Power: 0.37kw
-Torque: 14.4 Nm
-Shaft: Ø 20 x 40 mm
-Protection class: IP55
-Dimensions: 400/170/H210 mm
-Weight: 15kg
1
bending length: 2050sheet thickness: 1.8upper roll diameter: 95
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Cqkir98q
Options:
- Back roll with motor
- D...
5
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor
-Manufacturer: Kessler, DC motor
-Type: GM50/60/1/U
Oys09
-Max. Speed: 3200 rpm
-Power: 16 kW
-Voltage: see photo nameplate
-Shaft: Ø 55 x 100 mm
-Construction: B3
-Dimensions: 1010/570/H520 mm
-Weight: 610 kg
6
Cross table with stepper motor drive
Precision Positioning Systems UHL
Cross table UHL type KT5-NSOC
Serial No. 0008002
table size: 145 x 145 mm
table opening: 75 x 75 mm
construction height: 51 mm
Travel: 50 mm per axis
straightness / flatness: 5 ?m
- Drive per axis via 2-phase hybrid stepping motor, type ZSS 33.200.1,2
- Manual adjustment
Bfvk3j9m
Dimensions (cross table) L x W x H: 265 x 220 x 51 mm
Weight: 3,5 kg
very good condition
3
Mitsubishi HD 101-12 Permanent Magnet DC Servo Motor , serial no. according to photo , hole spacing of mounting holes: 142 x 142 mm, drive shaft: 35 mm , used, normal signs of use, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Bwb8flpm
11
Hydraulic drive with hydro motor
Electrical power: 55 kW
Hydraulic pump:
Manufacturer: MANNESMANN REXROTH
Dzb23e
Type: A4VSG250E01/10R-PPB10
Hydromotor
Manufacturer: RIVA CALZONI
Type: MR4500LPITIN1N1
Outlet axis diameter: 110 mm
Axis length: 185 mm
Weight: ~450 kg
Overall size (without axis):
diameter: 850 mm
height: 600 mm
6
Used Eurotherm Drives 590 Analog 100HP /75KW 590 DC Drive.
Eurotherm Drives
590 Analog series
Model: 590A/1800/9/0
Supply Voltage: 500 VAC, 148 AMPS, 3 PH, 50/60 Hz
Output Rating: 100HP
9qanuajgt
Armature Output: 460 VDC, 180 AMPS
Field Supply Volts: 500 VAC, 1PH
Field Output Current: 10 AMPS DC
Auxiliary Supply: 110 VAC, 1PH, 4 AMPS
1
bending length: 1550sheet thickness: 2.5upper roll diameter: 90
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
H3zw0yhgs
- In acccordance with CE norms.
Options:
- Back roll with motor
- ...
5
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor
-Manufacturer: Kessler, DC motor
-Type: M30/36/2
-Max. Speed: 3045 rpm
-Power: 7.5 kW
-Voltage: 170/400 V see photo nameplate
-Shaft: Ø 28 x 60 mm
-Construction: B3
-Dimensions: 585/290/H340 mm
-Weight: 115 kg
Br3smmocw3
3
DC shunt motor, main spindle motor, servo motor, DC motor,
DC motor
SIEMENS type 1GG5134-0WH46-6HU7-Z
Rated power : 22,5 kW
Operating voltage : 38 to 380 Volt DC
Rated current : 67 A
speed : 50 - 2160 / 4050/5000 rpm
Shaft diameter: mm
Shaft journal length: mm
keyway width in the shaft: mm
Xlxafvo7
- foot motor with 4 mounting holes
- with mounted forced cooling fan
Overall dimensions L x W x H: approx. 700 x 580 x 350 mm
Own weight: approx. 250 kg
The drive motor is still ready for operation i...
4
Mitsubishi HD 101-12 Permanent Magnet DC Servo Motor , serial no. according to photo , hole spacing of mounting holes: 142 x 142 mm, drive shaft: 35 mm ,used, strong traces of use, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Cb3z09jelp
2
DC engine control card
Regular card, for example. Older Kannegiess machines EMK-KFM
Cdd2gzqjdv
From Lager MG location
7
Fuel type Diesel
Number of cylinders 6
Power in kw 191
Power in hp 260
used Scania engine, bus engine
type: DC 9 02
Qgzqp
Variant: C 01
Condition for the purchase conclusion is a business activity of the buyer and their appropriate proof. Please send us a proof of your business activity (e.g. sales tax identification number, trade licence or association or chamber identity card) after completion of the purchase process. Delivery will only be made after proof of business activity.
Sale and delive...
1
bending length: 1250sheet thickness: 3upper roll diameter: 90
Bdf7ndkkou
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- D...
8
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor
-Manufacturer: Scharmann, DC motor from a Scharmann table boring mill
-Power: 3 - 11 kW
Ytyg9c
-Speed: 220 - 3200 rpm
-techn. Data: see photo nameplate
-Shaft: Ø 45 x 104 mm
-Construction: B3
-Dimensions: 1000/550 / H450 mm
-Weight: 509 kg
4
SIMOTICS SD MOTOR TYPE: 1CV3282C Low voltage IEC squirrel cage motor, intrinsically cooled, IP55 Thermal class 155(F) to 130(B) Cast iron housing Basic line Premium Efficiency IE3, 60Hz, P60: IE2 6-pole * Frame size. 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Terminal box top
F0z2esf3k
3
Fanuc A06B-0632-B001 DC servo motor , hole spacing of mounting holes: 70 x 70 mm, drive shaft: 10-11 mm , used, normal use, 100% functional
Cb3ptx8dbf
11
Für weitere technische Daten wenden Sie sich bitte an den Verkäufer.
Bsmus2faei
7
Rubberized Drive Pulley with Motor and Gearbox
for belt width 850mm
9v3z2rqc
was is use for a 15m incline conveyor system
1
bending length: 1250sheet thickness: 2upper roll diameter: 75
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- Digital read...
8
DC motor, servo motor, gear motor, electric motor, direct current gear motor
-Motor speed: 3000 rpm
-Manufacturer: Motor Lenze type 43.550.54.0.1.5
-Manufacturer: Lenze gearbox type 5/8000/5868
-Manufacturer: Lenze gearbox type 12.602.10.5
-Translation: 1: 12.5
-Construction: B3
-Diameter shaft: Ø 25 mm
-Protection class: IP 44
-Number: 1x motors available
-Price: per piece
-Dimensions: 670/220/H220 mm
-Weight: 28 kg
2pm3jm
5
performance 110 KW
tension 400 V
speed 1,500 to 5,000 rpm
adjustable motor with
- frequency converter
- incremental encoder, line choke, network filter
- external fan
emergency stop device
737eauvto
manual control unit
*frequency converter:*
type: VCD 4 S 160A AZ/NS
serial number: BKQ4S160AN20A-1
output: 207 KVA
motor performance up to 160 KW
total weight approx. 1,000 kg
6
EC Motion 2 Phase Step Motor SECM 266-E2.0A 3.6V DC 2.0A ,used, good condition, 100% working, scope of supply acc. photos
Cb3lnum9ld
13
Für weitere technische Daten wenden Sie sich bitte an den Verkäufer.
Bb3ual
1
bending length: 1050sheet thickness: 3.3upper roll diameter: 90
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
Bdf7nwmvww
- In acccordance with CE norms.
Options:
- Back roll with motor
-...
10
Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor
Qjpjp
-Veneer saw: SF Scheer drive motor EM 21
-Drive: 1.6 kW 2820 rpm
-Dimensions: 265/270/H255 mm
-Weight: 24 kg
6
performance 0.0540 up to 16.4 KW
Mwaxr
tension 28 - 420 V
speed 10 to 3,000 rpm
variable speed motor with
- frequency converter Siemens with control SIMOREG K
- external fan
emergency stop device
manual control unit
*frequency converter:*
type: SIMOREG K
performance 6 KW up to 774 KW
3
Fanuc A06B-0613-B031(?) DC servo motor, hole spacing of mounting holes: 130 x 130 mm, drive shaft>: 9 - 16 mm (conical), used, strong traces of use, 100% functional
Chhajf0fc
1
bending length: 1550sheet thickness: 1.2upper roll diameter: 70
Technical specifications:
Cqnh7yg0
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- D...
6
Sewing machine motor, alternator motor, electric motor, DC motor
Fq7anrb
-Manufacturer: Efka, vario dc sewing machine motor with control box
-Type: DC 1600 / N 153
-Power: 750W
-Speed: 5000 rpm
-Delivery: according to pictures, without additional accessories
-Dimensions: 320/210/H365 mm
-Weight: 14kg
3
Fanuc A06B-0642-B211 DC servo motor, hole spacing of mounting holes: 102 x 102 mm, drive shaft: 14 - 16 mm (conical), used, normal signs of wear, 100% functional
Dzlgni
1
bending length: 1050sheet thickness: 1.8upper roll diameter: 70
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
H3zz0d9o3
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- ...
2
DC motor, motor, electric motor
-Volt: 48V
-Speed: 2000 rpm
-Power: 2 kW
-Construction: B3
Qkq8u2iwh
-Number: 2x available
-Price: per piece
5
DC motor, gear motor, electric motor, direct current gear motor
Qlcu3vkbt
-Speed: 200/2000-3000 rpm
-Power: 3.2 KW
-Tachometer
-Construction: B3
-Diameter shaft: Ø 50 mm
-Protection class: IP 44
-Number: 2x motors available
-Price: per piece
-Weight: 220 kg
5
DC motor, gear motor, electric motor, direct current gear motor
-Speed: 200/2000-3000 rpm
B8oabita
-Power: 3.2 KW
-Construction: B3
-Diameter shaft: Ø 50 mm
-Protection class: IP 44
-Weight: 220 kg
4
Wiefelstede, Germany
