Used Drives for sale (21,355)

Condition: used, power capacity 15 kW volt 380 V ampere 28 A Ncodovttctopfx Adwjl weight of the machine ca. 84 kg

Condition: excellent (used), Year of construction: 2014, Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears Njdpfxevxq Nue Adwecl -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Ncedpfx Ajf Dlzujdwsl Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm Njdpfx Adof Dlzqowecl - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: excellent (used), Year of construction: 2020, Brand: MELKUS Model: C4060 Year of production: 2020 Number of pieces: 10 Control: autonomous (driverless) Charging stations: 9 Units in use: 9 Spare units: 2 Load capacity: 100 kg Maximum speed: 1.5 m/s Navigation system: SLAM (Simultaneous Localization and Mapping) or camera-based guidance Dimensions (W × L × H): 40 cm × 60 cm × 21 cm Own weight: 29 kg (without accessories) Power supply: LiFePo₄ battery Battery life: up to 8 hours Charging time: automatic fast charging Safety system: 1–2 laser scanners (front / front and rear) Ncjdpfxjwk Ebhe Adwol

Condition: good (used), Overall size: 2510 x 550 mm Roller surface size: 2000 x 420 mm Height: 940 mm Roller diameter: 50 mm Ncodpfx Adov S Uh Ujwel Aluminum frame, stainless steel roller! Set: 15 pieces Price per piece

Condition: refurbished (used), Dear customers, currently we offer you deflection rollers as well as drive rollers for profile belt sanding machines of the brand F. Zimmermann. The rollers were newly coated, with a more robust material for better durability, then crowned sanded and newly stored. The rolls fit the following machine types:Zimmermann PS0, year of manufacture independentZimmermann PS1, year of manufacture independentZimmermann PS1/2, year of manufacture independentZimmermann PS S, year of manufacture independentWhen ordering, please always specify the machine type and which rolls you require and in what quantity. We have everything in stock and can deliver at short notice, if you have any further questions please do not hesitate to contact me! Nsdpfx Ajd S Eb Aedwscl

Condition: good (used), Year of construction: 2020, Gear motor - Nord Drivesystems - 0.75kW - 4rpm - Type SK 9043.1VF-80LP/4 - 2020 -Weight 160kg Ncedpfx Aov Uh S Ejdwol - Price per 1 pc.

Year of construction: 2009, condition: good (used), Railcar, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Seacom, railcar with drive -Type: GWN 40t -Weight increase: two railcars coupled together to 80t with ID36864 Njdpoyam H Ajfx Adwocl -Platform: 4000 x 2500 mm -Load capacity: 40,000 kg -Drive: with electric geared motor -Track width: 1500 mm -Overall dimensions: 4060/2500/H770 mm -Empty weight: 2400 kg

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ncedjxwaz Hspfx Adwsl

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Njdpfx Ajxddwrodwjcl Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: ready for operation (used), stroke / mm Cone / mm Power / kW 6SN1145-1BB00-0EA1 Njdpjud Iqhofx Adwscl SIEMENS SIMODRIVE 611 POWER SUPPLY/REVERSE POWER SUPPLY MODULE, 80/104KW REGULATED; INTERNAL DEHEATING Condition: used (functional)

Condition: used, Siemens Simodrive LT-MODUL INT.25A 6SN1123-1AA00-0BA0 Nsdpfx Adshkx Rpjwjcl Condition: Used

Condition: ready for operation (used), stroke / mm Cone / mm Power / kW SIEMENS 6SN1145-1BA02-0CA2 SIMODRIVE LEISTUNGSMODUL Njdpfx Ajw Hhaledwecl Condition: used (functional)

Condition: used, Type: HR 336 C . 285 378 - 21 Serial No. 8 117 256 B Including connection cable Ncodpjw Dgh Nsfx Adwjl

Condition: used, Type:A06B-6127-H106 Ncjdpfxoquf Ufj Adwsl Works flawlessly.

Condition: new, STOBER MDS5040A/L frequency converter condition: brand new incl. packaging Nodpfx Adevanwfowjcl

Condition: excellent (used), ID - 344 980-14 SN - 29 212 466 Connection via terminals for max. 20A with suitable cover for ribbon cable Module width: 50 mm Supply voltage:400V~ +/-10% 385V- to 750V- This UV 105 can be used with both Heidenhain and Siemen inverter systems. inverter systems. Nedpfx Adjud Ilrjwjcl All technical specifications are without guarantee.

Condition: used, STOBER FDS4270/B frequency converter Nedpfxsx Ti D Se Adwocl Condition: used, functional

Condition: excellent (used), DOERRIS SCHARMANN Nedpfx Adow Iqz Tswjcl Manual Pendant Machine Hand Pendant Machine Control System

Condition: used, SIEMENS 6SN1123-1AA00-0JA1 LT module INT.300A Ncodpouddb Njfx Adwol Condition: used (functional)

Condition: used, weight ca. 12 kg Ncsdjuddhvjpfx Adwol LE 407 Neutral Heidenhain logic unit LE 407 A ID no. 264 430 29 PLC graphics N1 ID no. 257 954 03 / 6 204 942 Computer N1 ID no. 265 219 01 / 6 189 363 Power supply ID no. 236 484 10 Type: LE 407 A ID no. 264 430 299 The device comes from a warehouse resolution.

Condition: used, SIEMENS 6FC5410-0AY03-1AA0 + 6FC5447-0AA01-0AA0 SINUMERIK 810D CPU CCU3.4 Condition: Used (working), incl. 3-day functional guarantee after receipt of Nsdevl Ixmepfx Adwjcl goods.

Condition: used, Type: HR 330 Nedpfoxmaq Hjx Adwecl ID no. 251 534 11 Serial no. 7 092 828 A / U9 Condition: Used – fully functional Includes connection cable

Condition: used, SIEMENS SINUMERIK 810D/840D OPERATING PANEL FRONT Nsdowtr Hiepfx Adwjcl OP 010, 10.4" TFT (640 x 480) Version F Resolution: 640 x 480 pixels (VGA) Keyboard: Mechanical keys Compatible with: SINUMERIK 810D / 840D / + Article number (Version F): 6FC5203-0AF01-0AA0 All information is provided without guarantee of accuracy or completeness.