Used Dc Servo Controller for sale (49,509)

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V Lhjdehtryijpfx Akmen -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece -Dimensions: 500/260/H155 mm -Weight: 6.6 kg

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6110-H015 Lodpfx Aoi Sdf Hjkmshn -Number: 2x servo modules available -Price: per piece -Dimensions: 285/90/H380 mm -Weight: 4.9 kg/pc.

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Lsdpfx Akjh D Syvemohn Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: +-10 Volt Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6114-H207 -Number: 2x servo module available -Price per piece -Dimensions: 310/60/H380 mm -Weight: 4.4 kg/pc. Ljdji Sdg Iopfx Akmohn

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module Lhodpehagpcsfx Akmen -Manufacturer: Bosch, servo module -Type: SM 4.7/20-GC16 T161-902 -Un: 325V DC -Dimensions 250/60/H260 mm -Weight: 2.3 kg

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6111-H011#550 -Number: 2x servo module available Ledpsi Sdgnofx Akmohn -Price per piece -Dimensions: 285/90/H380 mm -Weight: 4.7 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Price between €300-1000 each. Lhsdjucwzaopfx Akmsn Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit Lhsdehtn R Tjpfx Akmsn -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H315 H316 -Dimensions: 500/250/H160 mm -Weight: 8.4 kg

Condition: used, Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller Ljdpfx Aksd Ndy Uomshn DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling type: Air You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Lodewd N S Depfx Akmehn

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter Lhodpjzwfzxsfx Akmjn PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested All offer subject to prior sale

Condition: good (used), Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4025 AT -Number: 2x servo controllers available -Price: per piece Ledpfxjmch Uis Akmehn -Dimensions: 350/155/220 mm -Weight: 6.3 kg/pc.

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier Ledpsn Nbmtefx Akmjhn -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

Condition: good (used), Year of construction: 2019, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control system, converter, controller, servo module, stepper motor driver, path guide controller, steering controller -Manufacturer: WKC, Web guidance controller, 3 control loops -Type: D-MAXE 3 Lhodoxxrbzopfx Akmen -Number: 3 controllers available -Price: per piece -Dimensions: 190/90/H95 mm -Weight: 1.2 kg/pc.

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Lhjdpfx Aoz Snfiskmsn Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Lhjdpswywi Ajfx Akmsn Used, in very good condition

Condition: used, Servo drive, servo card, output module, CPU card, frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Soprel, servo controller type PWME 140x14/28 -PN.: 7.31.711 44476 / 1288 -Quantity: 1x module available -Dimensions: 310/210/H60 mm Lhjdpjt Sz E Aefx Akmjn -Weight: 2.7 kg

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module -Manufacturer: B&R, Processor Controller with bus base -Type: X20 CP 0483 -Bus base: X20 BB 52 Ledpfx Akjyhnb Domohn -Dimensions: 100/40/H80 mm -Weight: 0.3 kg.

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Quantity: 2 available Ljdpfx Aszlt Txskmohn Manufacturer: Igus Type: i6FX8002-5DN05 Description: Igus Chainflex servo cable, suitable for Siemens servo drive systems. Highly flexible cable for energy chains, designed for continuous motion applications.

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device Lsdpsn Nbm Eofx Akmjhn -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency inverter, drive controller for robots FANUC Type A06B-6105-H003 No. V07Z08282 Lodpfx Askpwu Rskmehn NEW / unused Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Installed circuit boards: A16B-2000-0063/07D A16B-3200-0440/05C - Plexiglass cover not included Dimensions W x H x D: 70 x 170 x 380 mm Weight: 16.5 kg Like new / unused, in open original packaging from warehouse liquidation.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available Lhodeq T T Npopfx Akmsn -Dimension: 490/110/H390 mm -Weight: 15 kg

Condition: used, This servo controller / module from the Indramat brand is for sale. Model: KDS 1.3-150-300-W1 Number: 253924 K06/96 Good, used condition. Ledpfsrr Tgljx Akmshn Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW Ljdpfoxpqy Dox Akmshn - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, REGATRON Programmable DC power supply / Industrial power supply unit REGATRON TopCon Quadro 3 × 32 kW – total 96 kW rated power – 0–400 V DC – 0–100 A per unit For sale is a used industrial DC power supply system Lhods Ad Ia Iopfx Akmsn with three programmable REGATRON TopCon Quadro DC power supply units in an industrial control cabinet. The system is suitable for industrial testing and measurement applications, development, research, and the supply of electrical loads. Technical data: Manufacturer of power supply units: REGATRON AG Series: TopCon Quadro Type: TC.P.32.400.400.S.HMI Unit type: Programmable DC power supply Number of power supply units: 3 Year of manufacture of control cabinet system: 2016 (according to nameplate) Electrical data per power supply unit: Rated power: 32 kW DC output voltage: 0–400 V DC output current: 0–100 A Mains connection: 3 × 400 V AC Mains frequency: 48–62 Hz Input current according to nameplate: 3 × 60 A Total equipment: 3 × REGATRON TopCon Quadro power supply units Installed rated power: 3 × 32 kW = 96 kW The actual available total power and output configuration depend on the existing wiring and parameterization. A combined 96 kW output configuration has not been verified. Control and regulation: Programmable output voltage Programmable output current Power regulation Constant voltage operation (CV) Constant current operation (CC) Constant power operation (CP) HMI control panels with LCD displays Rotary and control buttons RS232 interface according to data sheet Status and error indicators Equipment: Industrial control cabinet 3 × REGATRON TopCon Quadro DC power supply units Main switch Electrical protection and switching elements Internal wiring and connection components Fan cooling RITTAL power socket strip KEMET components in the control cabinet Lifting points / transport eyes Other installed components as shown in the pictures Application areas: Industrial test benches Electrical load and supply tests Research and development Power electronics Laboratory and test systems Industrial DC power supply Scope of supply: 1 × Industrial control cabinet with 3 × REGATRON TopCon Quadro TC.P.32.400.400.S.HMI Integrated electrical installation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Dimensions and weight: Per REGATRON power supply unit (H × W × D): 400 × 483 × 525 mm (housing, without connections) Weight per power supply unit: approx. 64 kg according to data sheet Weight of the three power supply units together: approx. 192 kg External dimensions of the entire control cabinet: not determined Total weight of the system including the control cabinet: not determined Collection or shipping by forwarding agent possible after consultation. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.