Used Dc Motors for sale (26,402)

Condition: used, DC motor, servo motor, gear motor, electric motor, direct current, gear motor Dkjdpoci Ahusfx Aidow -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V Dkjdpotrzphofx Aidow -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Kählig, DC geared motor -Type: M63x60/I SN31 IGM4/2 -Voltage: 110V -Torque: 324 N/cm -Speed: 120 rpm -Technical data: see photo of the type plate -Shaft: Ø 10 x 25 mm -Number: 15 motors available Dsdpfxjrwqbvo Aidjkw -Price: per piece -Dimensions: 220/90/H100 mm -Weight: 2.6 kg/pc.

Condition: good (used), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x22/I SN31 IGMi12/2 Djdpfx Aijtr R A Ejdjkw -Voltage: 24 V -Torque: 108 N/cm -Speed: 340 rpm -technical data: see photo type plate -Shaft: Ø 10 x 28 mm -Number: 4x engines available -Price: per piece -Dimensions: 170/100/H100 mm -Weight: 2.0 kg/piece

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Dkjdpfx Ajz Snpzeidsw Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Voltage: 180/200 V -Power: 0.18/0.27 kW -Construction: B3 angle -Shaft: Ø 14/30 mm -Dimensions: 310/155/H150 mm -Weight: 7 kg Dkodpfxed Rh Rij Aidsw

Condition: ready for operation (used), Mitsubishi HD100-11SP DC servo motor SN: N77806021 - Terminal box cover missing, used, good condition, 100% functional, scope of delivery as per photos. Dodpfx Aow E Uxleidskw

Condition: used, mileage: 4,40,000 km, power: 97 kW (131.88 HP), first registration: 04/1961, fuel type: diesel, number of seats: 36, gearing type: mechanical, color: beige, Year of construction: 1960, Kässbohrer Setra S 10 Older model with a front glass dome. Completely restored. 34 + 2 + 1 reclining seats. Roof hatch. Roof edge glazing. Radio. Henschel engine. Dkedpfxo Aicaus Aidow Manual transmission, 4 speeds + split. Length: 9630 mm Width: 2925 mm Height: 2925 mm Price, net: 185,000.00 Euros. Rental possible for your event and/or film shoots. Delivery throughout Europe is possible using our car transporters. We offer worldwide shipping. Net export possible.

Condition: good (used), DC motor, servo motor, motor, electric motor -Speed: 3000 rpm -Power: 0.4 kW -Electricity: 65 V -Design: B14 -Shaft diameter: Ø 14 mm Dkodpfeb Ilxgjx Aidsw -Dimensions: 210/160/H160 mm -Weight: 6 kg

Condition: good (used), DC motor, geared motor, electric motor, DC, geared motor -Speed: 3000 rpm Dsdpfx Aisb A R Sfjdekw -Field 200: V 0.18 A -Anchor 180: V 0.8 A -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 44 -Weight: 3 kg

Condition: good (used), Year of construction: 2002, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2520, We have more fishmeal equipment for sale. Atlas Stord tp RS-80DC Order no. 200059 Max. input shaft torque 1900 Nm Dkedpfj Ahrdqjx Aidsw Year 2002 Gear ratio 1:250 Press cake thickness 45 mm Motor 90 kW Asea tp 280M

Condition: new, Baldor SD35-20-A1 DC Servo Motor SN:FME0906B, unused in opened original packaging, 100% functional, scope of delivery as per photos Dodpfxot Sblpj Aidekw

Condition: used, Year of construction: 2017, operating hours: 1,016 h, 2017 | Genie TZ™-50 DC w/Drive (17.09m) | Used Trailer-Mounted Boom Lift | 1016 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 32 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Batteries and electric motor are not that good anymore ,Driving leaver doesnt response well , Machine is repainted not nice , lot of rust also on hoses driving motor , all Operations worked during inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38147 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Djdpfx Aiozrm Naedokw We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Dedsyxvwijpfx Aidjkw Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: ready for operation (used), Mitsubishi HD80-11SP DC servo motor SN: N77805021 with Sanyo Denki RST-5XC-11P mounting SN: 021122010D, used, in good condition, 100% functional, scope of delivery as per photos Dodpfxjw E Uxrj Aidokw

Condition: excellent (used), Year of construction: 2014, Counter: 2,4 million Equipment / Additional information: In-feed Paper Size: Min: 210mm x 210mm, Max: 370mm x 670mm (999mm*1) Cuts: Max. 30 cuts per sheet Creases: Max. 20 per sheet Dsdpfxj Aiflvs Aidekw Ideal For: Business cards, Folded Flyers, Tickets, Perforated vouchers

Condition: used, mileage: 7,05,000 km, power: 92 kW (125.09 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, color: yellow, Year of construction: 1969, Former Swiss Postbus for sale. Vehicle: Saurer L4C, left-hand drive. One of the last bonnet-type buses built on a Saurer chassis. Body built by Ramseier + Jenzer. They completely restored the vehicle in 1991 (factory restoration). The vehicle was owned by the previous owner for 40 years. Impeccably maintained and ready for immediate use. Dksdpfx As Aia Dysidjw 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic door at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. €75,000.00 Net export possible. We offer worldwide shipping.

Condition: used, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, type plate available, The welding machine includes a Cool Midi 1800 cooling unit and a TA 24 control panel, complete with cables. It is fully functional and can be tested at our warehouse in Přerov. Dodpj Ah S H Hefx Aidjkw

Condition: new, Two-speed (Dahlander connection) three-phase electric motor + cycloidal gear motor (gear drive mechanism), characterized by extremely high overload resistance and durability. Dsdpfs Afd Dfjx Aidekw

Condition: ready for operation (used), SEM MT30Z4-85 Ferrite Brushed DC servo motor SN:L9813 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dedpfx Aiet S Anxedjkw

Condition: new, power: 112 kW (152.28 HP), nominal power: 110.32 kW (149.99 HP), rotational speed (max.): 1,791 rpm, VEM Motors IEC/EN 60034-1 Dkedpfx Asy El Tysidjw

Condition: ready for operation (used), functionality: fully functional, power: 8,000 kW (10,876.96 HP), rotational speed (min.): 1,493 rpm, input voltage: 10,000 V, input frequency: 50 Hz, input current: 539 A, type of input current: three-phase, overall weight: 19,800 kg, protection type (IP code): IP54, Siemens motor, 10 kV. Year of manufacture: 1985 (rewound in 1998). Dkodj Ahx R Depfx Aidow

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 8,000 kW (10,876.96 HP), rotational speed (min.): 1,492 rpm, input voltage: 10,000 V, input frequency: 50 Hz, input current: 529 A, type of input current: three-phase, overall weight: 22,800 kg, protection type (IP code): IP54, ABB 10kV motor. Dsdpo Ahiu Esfx Aidskw

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T DR63M6/BR/TH gearmotor with a three-phase motor and an integrated 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good, with only normal signs of wear and tear resulting from use. The gearmotor is ideally suited for driving conveyors, feeders, packaging machines, production lines, and other industrial equipment requiring precise drive with a brake. Dedpfx Asz Snhwjidekw Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 900 rpm Output speed: 38 rpm Gear ratio: i = 10.25 Torque: 3.2 Nm Brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.08 A (Δ) / 0.62 A (Y) Power factor (cos φ): 0.65 Weight: 9.04 kg Operating mode: S1

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) Dkjdpe Ah Tlrjfx Aidew • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)