Used Saw Motor for sale (29,354)

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm Njdji Dfidjpfx Afxedd cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, 900 band saw with 5 hp motor, used. Ndsdpfx Afswtl S Sjxod

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Nodsh D Rt Aepfx Afxodd

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg Ndodpfx Aeh Elztefxjd

Year of construction: 1987, condition: used, Floor saw -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece Njdpfxjb A Hv Hs Afxsdd

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Ndodpfxjxvpqbo Afxsd

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Ndsdjuqk Azepfx Afxed

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine Ndedpfx Aodzp T Djfxed are also available.

Condition: used, power: 1 kW (1.36 HP), nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, overall weight: 1,800 kg, Higen FDA 7000 servo drive only Ndedpfx Afoxr Rhaoxed

Condition: like new (used), functionality: fully functional, overall weight: 26,700 kg, For sale: High-power TECO Westinghouse 3-phase induction motor, originally installed as the main drive for a booster draft fan (BTV-7) in a power plant. This is a 6 kV / 5.6 MW industrial motor designed for heavy continuous operation (S1 duty) with high reliability and thermal protection systems. The motor was operated indoors, extremely clean, no corrosion, and includes all premium options: ✔ RTD sensors (bearings + windings) Njdpfexxm Dwjx Afxjdd ✔ Condensate heater (anti-moisture) ✔ Corrosion-protected housing ✔ Heavy-duty bearings (BBRN) Perfect for large-scale industrial ventilation, induced/forced draft fans, compressors, pumps, or retrofit installations in power and process industries. Technical Specifications Power Rating: 5600 kW (5.6 MW) Voltage: 6000 V (6 kV) Current: 658 A Frequency: 50 Hz Speed: 745 rpm Efficiency: 96.2% Power factor: 0.92 Duty: S1 (continuous) Insulation class: F Bearings: BBRN industrial heavy-duty bearings Condensate heater: 220 V / 1200 W Sensors: RTD sensors on bearings and stator windings Motor weight: ~26,700 kg Design: Outdoor-rated, corrosion-proof; installed indoors → excellent condition Condition Very good / excellent No corrosion or structural damage Clean windings, clean terminal box Bearings in good condition Motor stored and operated in controlled indoor environment Fully functional and removed from working installation Applications Booster draft fans (ID/FD fans) Large centrifugal or axial fans High-power pumps (cooling water, circulation pumps) Compressors Mining & metallurgy Power plant auxiliary systems Chemical & petrochemical industry TECO Westinghouse motor, 5600 kW motor, 6 kV induction motor, high-power motor, booster fan motor, ID fan motor, FD fan motor, heavy-duty motor, industrial motor 6 kV, power plant equipment, energy sector machinery, BTV-7 motor.

Condition: excellent (used), For sale is a Costa puma series cutter in excellent condition. It can be put to work immediately. It can be tested on site. I will send a video upon request. Njdsxw Rhdepfx Afxjdd

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Ndodpfexu Ewnjx Afxjd

Condition: good (used), functionality: fully functional, Technical details: SEW motor Ndsdswu Dbbopfx Afxed Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: EZSM6D030AZAC, overall weight: 8 kg, total length: 615 mm, total width: 73 mm, total height: 66 mm, input voltage: 250 V, type of input current: AC, feed force X-axis: 400 N, stroke length: 300 mm, tool weight: 3,000 g, actuation type: electric, Item # EZSM6D030AZAC, EZS Series Straight Type Electric Linear Actuator - Slide (74 mm (W) x 66.5 mm (H), Stroke Length: 300 mm) (AC Input) Compact, High Rigidity Electric Linear Slides with simple, dust-resistant structure providing the high response, low vibration and hunting-free operation of a stepper motor in an electric linear slide. A wide variety of options to suit the equipment space and environment, including straight type and reversed motor type. Equipped with AZ series stepper motors with battery-free absolute encoder Positioning information can be known without a sensor Nsdpfoxxl Eaex Afxodd High reliability using closed loop control Reduced motor heat and reduced energy consumption through high efficiency design Connection Cables Required (sold separately*)

Condition: excellent (used), functionality: fully functional, power: 36 kW (48.95 HP), overall weight: 2,100 kg, fuel type: diesel, color: orange, Year of construction: 2014, operating hours: 817 h, Equipment: all wheel drive, For sale: A540 DiXL V-2203 Spider – Professional Chipper in Excellent Condition Operating hours: only 817 First registration: Ex-government vehicle from Germany, decommissioned since 2022 Condition: Very well-maintained, fully functional Maintenance: Professionally serviced by authorized workshop Last major service at: 769 operating hours Special feature: No exhaust aftertreatment system – ideal for straightforward operation and maintenance Technical Specifications: Model: A540 DiXL V-2203 Spider Drive engine: Kubota V-2203 (diesel) Power output: 35.9 kW / 48.8 HP Njdpfsxq Sa Uex Afxedd Engine type: 7 DF 5859 Max. feed opening (W x H): 210 x 190 mm Chip length: Infinitely adjustable up to 20 mm Number of blades: 2 (plus 2 spare blades included) List price (new): €74,000 Chassis & Mobility: Crawler chassis with hydraulic adjustment Height adjustment: up to 300 mm Width adjustment: up to 420 mm Leveling adjustment for uneven terrain Diesel tank: 30 liters Exceptionally off-road capable and versatile in use Conclusion: This A540 DiXL is the ideal machine for professional forestry and landscaping applications. It impresses with its robustness, ease of use, low operating hours, and excellent technical condition. The last major service was completed at 769 operating hours – the machine is therefore ready for immediate use. No exhaust aftertreatment – making it particularly low-maintenance and easy to operate. Viewing and test operation available by appointment.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: Nedjfv Hphjpfx Afxodd main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece Njdpfx Ajb A N Akjfxjdd -Quantity: 17 pieces available -Weight: 2 kg

Condition: used, Vesto saw with two discs for sale Ndjdotqt T Ispfx Afxed - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: used, Electric motors Ndedpfx Aexfvzrofxed

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 71500846002, power: 132 kW (179.47 HP), Technical data as per nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Motor number: 71500846002 Power: 132 kW Voltage: 400 V (delta connection Δ) Current: 241 A Frequency: 50 Hz Speed: 1435 rpm Mounting: B3 (foot mounting) Protection class: IP55 Insulation class: F cos φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany New price: approx. €6,200 Our price: only €2,800 Njdjxgtpijpfx Afxodd

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Nsdjwxmhlopfx Afxedd 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, power capacity / kW volt / V ampere / A total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 Ndjdpfjig A Ekjx Afxod A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head - for sawing pallet boards - feed chain Nedpeupt Siefx Afxsdd - feed pushers from the top

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 Nsdjif Sc Dspfx Afxedd V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564

Condition: new, power capacity / kW volt / V ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 V: 400/690 Nodpfx Afouddlhjxodd RPM: 1470 / 1764 Total power: 18.5kW / 21.3kW Condition: New