Used Deburring Machines for sale (64,672)

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding equipment Grinding belt units: 2 Kwedpfx Afowa Ubceasu Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers - Dust extraction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Kjdpewa T Sasfx Afajwu Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Kwsdpfx Afopwh Tfoaeu Standard workpiece thickness: 0.8 - 150 mm Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs

Condition: as good as new (ex-display), Year of construction: 2024, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Kodpfx Ajtr Avijfaswu Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Year of construction: 2005, condition: good (used), functionality: fully functional, (Please state your offer price) There are 4 identical units available!!! Kjdpfx Aswvaycjfaswu Sale only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data see attachment. Any warranty or guarantee is excluded. We accept no responsibility for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection regulations as stipulated by accident prevention guidelines. No sales to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text is leading. Without any guarantee or warranty, including completeness of tools & accessories or compliance with environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, Kjdst D D Nzepfx Afajwu No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm Kwodsnvdtcspfx Afasu speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: ST-B-1661, Offer 24154 Kwedpfstwmv Esx Afasu Technical data: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Lg.No. 20314 Technical data: steel - stainless steel - aluminum - plastic ,machining deburring and beveling operation is carried out with milling cutter support angle - bevel angle inclinable Kodpfxek H D Dfj Afajwu bevel angle adjustment 15 to 45 ° bevel width continuously adjustable 0 to 7 mm length of guide bar 500 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm workpiece length: 150mm Kodpfx Afohg Nuisaswu Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Weight: 2t

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Kedpfx Afeucw Dzoajwu

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Kedpjucw Rbefx Afaewu The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: excellent (used), Timesavers Series 42 WRB Machine technically overhauled, operates flawlessly. Ksdpfjxl A D Tex Afajwu 1st station: Grinding unit for removing pronounced burrs and splatter; surface finishing with Scotch band is also possible. 2nd RB brush unit, 8 deburring rollers for all-around, uniform edge rounding. Working width of 1350mm. Vacuum conveyor belt Conveyor belt speed infinitely adjustable via potentiometer Brush speed infinitely adjustable via potentiometer Part thickness from 0.8 to 100mm Additionally included: dry dust collector Machine available from mid-November. For further questions, feel free to contact us directly.

Condition: as good as new (ex-display), operating hours: 170 h,

Condition: new, Timesavers Series 12 WW The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm. Kedpfjwqf U Uex Afaewu

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. Kwjdpfx Aol Dw D Ejfasu This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale With Spare Belts Ideal for sheet metal boxes Ksdpfx Afowbhtnsaswu

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Kodpfx Aewbh Dyofaswu Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,060 mm, Multiple operations in one pass: deburring, rounding, oxide removal, metal slag removal ... Abrasive belt aggregate (K) TopBrush aggregate (4PTB) Kwedpor Iydgefx Afaeu Working width: 1060 mm Fast throughput: rounding at 4 m/min Operator-friendly operation via touch screen. Ex showroom machine!

Condition: as good as new (ex-display), functionality: fully functional, working width: 150 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes and strips. Deburring, rounding and finish grinding. Abrasive belt aggregate (K) TopBrush aggregate (2TB) Kedpfx Asr Iyg Aefaowu Working width: 150 mm Ex showroom machine!

Condition: good (used), Thread cutting machine, pipe thread cutter Kwedpfowyu Hfjx Afaeu -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Condition: used, Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry. Kodpfeykpaajx Afaewu

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH secondary impact crushers set the standard in rock crushing machine technology with their high efficiency and superior crushing performance. These crushers are specifically designed to meet high-capacity production needs. Thanks to their robust body structure and optimized rotor design, they deliver a perfect cubic-shaped final product even with hard and abrasive materials. The three-stage pendulum system allows primary, secondary, and tertiary crushing operations to be performed on a single machine. This minimizes time loss in the production process while maximizing efficiency. High chrome or manganese alloy cutting bars offer long life and low maintenance costs. The hydraulic opening system maximizes operating time by facilitating maintenance and part replacement. CONSTMACH secondary impact crushers offer a reliable solution for any rock crushing plant thanks to their high reduction ratio and wide discharge opening. Secondary Impact Crusher Technical Specifications CSI-1210 Rotor Diameter: 1,100 x 1,100 mm Maximum Feed Size: 200 mm Kwsdpfx Aexqgtisfaeu Production Capacity: 60 - 100 t/h Motor Power: 160 kW Weight: 17,500 kg CSI-1212 Rotor Diameter: 1,100 x 1,250 mm Maximum Feed Size: 250 mm Production Capacity: 120 - 150 t/h Motor Power: 200 kW Weight: 21,500 kg CSI-1215 Rotor Diameter: 1,100 x 1,500 mm Maximum Feed Size: 350 mm Production Capacity: 200 - 250 t/h Motor Power: 250 kW Weight: 26,000 kg Why Choose CONSTMACH Secondary Impact Crushers? CONSTMACH prioritizes quality and durability in the production of stone crushing machines. Our secondary impact crusher models reduce operating costs with their long-lasting components, low maintenance requirements, and high performance. They offer guaranteed uninterrupted operation with an extensive service network and easy access to spare parts. Each model is designed to suit different production capacities, providing the most suitable solution for your facility. With reliable engineering, high production standards, and a customer-focused service approach, CONSTMACH is always one step ahead in the stone crushing industry. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Kodpfx Afeylm Tyeajwu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Kjdpevz H N Njfx Afajwu Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.