Used Deckel Fp 4 M for sale (705)

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Dkedpfelu Hpgjx Afpjh

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Dkedpfx Afewqdtpopeh Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 2803-3500, feed length X-axis: 400 mm, feed length Y-axis: 320 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, For sale is an FP3NC with Heidenhain MC 320 control. The machine has recently been equipped with the control and the functions have been tested. The machine is offered without tools/vise. The table is included in the scope of delivery. Dksdpfx Afjt Dmx Eepeh On request, delivery throughout Germany is possible at cost.

Condition: used, Year of construction: 1992, machine/vehicle number: 2821-1444, See pictures for condition. More detailed information about the machine will follow shortly. Dkjdpetgkd Rsfx Afpjh

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan Dkjdpfsu Nvwvsx Afpeh To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 480 mm control MillPlus IT V600 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 Nm tool taper SK 40 swivellable B: -95 / +30 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load 250 kg rotatable C: 360 ° max. workpiecediameter 380 mm max. workpiece height 670 mm number of toolpositions 16 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 8,0 kg feed speeds max. 30.000 mm/min rapid traverse 30 m/min Feed force ( X / Y / Z ) 7 / 13 / 10 kN Dkjdju Dbpmjpfx Afpjh total power requirement 27,6 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,1 x 3,0 x 3,0 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h - from training center

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Djdewrdu Ajpfx Afpskh Spindle power: 7.5 kW Max speed: 5000 RPM

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Dksdpoxyk Upsfx Afpoh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and stepless feed, in very good CONDITION, CE compliant Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6209 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Equipment: Dksdpfsxdi Ivjx Afpoh >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts plan About the machine: For sale is a universal milling machine Deckel FP1 with CE certification, in very good condition. The machine has very minimal backlash and all spindles can be moved easily. Even at maximum speed, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine via a plug, making transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine features rapid traverse in those axes as well. Another great advantage is the active 3-axis digital readout. With this Heidenhain path control, you can input dimensions, and the machine will automatically move to them. The FP1 was previously located in a training facility, where it was only used occasionally. The oil was changed, and the machine has been mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to inspect and test this machine under power at our premises.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 38,040 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC Control: Heidenhain iTNC530 X-axis: 1,040 mm Y-axis: 600 mm Z-axis: 500 mm Linear drive: On the X-axis Worktable Dimensions: 1,250 mm x 600 mm Max. workpiece weight: 800 kg Spindle Spindle operating hours: 38,040 h Spindle speed: 12,000 rpm Dsdpfx Afsxal Rxepjkh Tool System Taper type: SK-40 Tool magazine capacity: 30 Tool diameter: 100 mm Max. tool diameter with empty neighboring pockets: 140 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Length: 3,750 mm Width: 2,340 mm Height: 3,164 mm Weight: 8,900 kg EQUIPMENT - Direct measurement system - Blum tool laser measurement for tool length and diameter - Chip conveyor - Bed flushing - Electronic handwheel

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Dkedpfx Aexvddvjfpjh

Condition: ready for operation (used), Year of construction: 2006, operating hours: 9,442 h, functionality: fully functional, machine/vehicle number: 29110004034, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Siemens 810D Powerline Table surface: 1,250 x 600 mm Dkjdpfx Afjwa Tmwjpeh X-axis travel: 1,040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle & tool holder Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Spindle drive: 13 kW / 19 kW (100% / 40% ED) Tool changer: 30 positions MACHINE DETAILS Spindle hours: 9,442 h On-time: 32,189 h EQUIPMENT - Linear drive in the X-axis for more precise movements - Bed flushing to clean the work area - Spiral chip conveyor for efficient chip disposal - Direct position measuring system for precise Position determination - Temperature compensation of the Z-axis via temperature sensor with active cooling unit - Blown air from outside via two pipes for chip removal

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel X: 1,040 mm Travel Y: 600 mm Travel Z: 500 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Tool magazine: 30 positions Internal coolant supply: 40 bar Clamping area: 1,250 x 600 mm Dsdpfowtrb Hjx Afpokh Maximum table load: 800 kg EQUIPMENT - Chip conveyor - Spindle cooler - ICS (internal coolant supply) - Tool measurement - Documentation

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 600 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 640 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Control: Heidenhain iTNC 530 External length: 850 mm External width: 630 mm Max. table load: 600 kg Spindle speed range: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Dkjdpfowtq Rgex Afpsh Operating hours: 107,000 h Spindle hours: 23,838 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,826 h, functionality: fully functional, machine/vehicle number: 29100008944, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 600 kg, table width: 850 mm, table length: 630 mm, TECHNICAL DETAILS Travel in X-axis: 640 mm Travel in Y-axis: 600 mm Dkodpfxowtq Rms Afpoh Travel in Z-axis: 500 mm Table size: 850 x 630 mm Maximum table load: 600 kg Spindle taper: SK 40 MACHINE DETAILS Control: FANUC Connected load: 39 kVA Power-on time: 75,884 h Spindle hours: 37,826 h

Year of construction: 2000, operating hours: 47,085 h, condition: good (used), functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets Djdpfslrupaex Afpskh TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! Dkedpfxouw Uu Nj Afpsh The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Controls: Deckel DIALOG 11E, tools are available, number of operational hours unknown, was maintained regularly, an inspection is possible. Dodpfepu A Ekex Afpjkh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,810 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-travel: 640 mm Y-travel: 600 mm Z-travel: 500 mm Control: SIEMENS 810D powerline Spindle speed: 12,000 rpm Table dimensions: 850 x 630 mm Table load: max. 600 kg Dkjdpfxsv Rdbuj Afpoh Tool magazine: 30 positions MACHINE DETAILS Total power requirement: 42 kW Machine weight: approx. 6.5 t Space required: approx. 3.50 x 3.30 x 3.60 m On-time: 52,248 h Spindle hours: 8,810 h EQUIPMENT - BLUM tool breakage/measurement system - Electronic handwheel - 3 leveling elements - Chip conveyor - Interlit SPB coolant/belt filter system 3/600

Condition: used, Year of construction: 2003, x-travel 640 mm y-travel 600 mm z-travel 500 mm Control SIEMENS 810D powerline table dimensions 850 x 630 mm table load capacity 600 KG Dksdpfewp S Rmjx Afpeh tool magacine with 30 Plätzen spindle turning speed range 12.000 U/min total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600

Year of construction: 2001, condition: ready for operation (used), A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible. Dedpfxsw H Atye Afpekh

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible. Dkjdpfxouzlfmo Afpjh

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min Dsdpjh Ra Izefx Afpekh spindle drive motor:4,0 kW tool taper:SK40 control:CNC Contour 3 power capacity:9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Rotary table: NC rotary table diameter 450 mm Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Djdou Ra I Ispfx Afpjkh Tool changing device Chip conveyor 3D path control

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 2821-0457, Equipment: documentation/manual, Machine was functional until we moved it. Now a control problem, control cannot be switched on is I think a small thing. Documentation is available! Dkjdou It A Tepfx Afpoh Tool holder needs to be straightened, concentricity is no longer great.