Used Universal Center for sale (15,043)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! TECHNICAL DETAILS Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Duodpoymbz Ijfx Ag Asp Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: IKZ 5 axes with chuck

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Dodpsymbb Ijfx Ag Asup Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Dedjymw Rljpfx Ag Aeup Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Dedpfx Aox Adn Ujg Aoup Additional Details: Twin Pallet

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Universal Machine Center 5 axis simultaneous DMG DMC 105V Linear Year 2007 Dedpewvra Ijfx Ag Aoup Travel : X1050 Y 800 Z 560mm NC Rotary Table Ø1,000mm Heidenhain iTNC530 Control Spindle 18,000rpm ATC 30 HSK-63A NC B axis Control Milling Head – 120o / +30o Roto clear window Tool Measuring system – Blum Measuring probe Cooling by air blast through spindle by M code Spindle through coolant Chip conveyor

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center DMG DMF 250 Linear Year Mfg 2006 Heidenhain iTNC530 control Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) Dujdpfxex Nmlls Ag Aep NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis Price Drops

Condition: ready for operation (used), Year of construction: 2011, VF - 2YT Year 2010 & 2011 Travels S.A.E METRIC X Axis 30.00 in 762 mm Y Axis 20.00 in 508 mm Z Axis 20.00 in 508 mm Spindle Nose to Table (~ max) 24.0 in 610 mm Spindle Nose to Table (~ min) 4.0 in 102 mm Spindle S.A.E METRIC Max Rating 30.0 hp 22.4 kW Max Speed 10,000rpm Djdpfsx Hc Uqex Ag Aeup Taper BT40 ATC 24 Bearing Lubrication Air / Oil Injection Air / Oil Injection Cooling Liquid Cooled Liquid Cooled c/w RT-160 and RT-160-2 Rotary Table c/w Tool measuring system 2 units

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Duodpfx Aoygx Hnsg Asp Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 800 mm, table length: 630 mm, table load: 850 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 8,500 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Used Hermle C42U, year 2014, equipped with Heidenhain iTNC 530 control. Travel ranges: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: - Heidenhain iTNC 530 control - Linear axes - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - Tool magazine with 42 positions - Additional magazine with 43 positions; total 85 tool stations - NC rotary swivel table 800 mm x 630 mm - Worm drive in the C-axis - Table load capacity: 850 kg - ICS 80 bar with paper band filter - Scraper belt conveyor - Air purge for scales - Bed flushing - Air blast through spindle center - Emulsion mist extraction - Chip flushing gun - Manual cabin door - Automatic cabin roof - Electric thermal compensation - Polycarbonate safety windows - Electronic handwheel Duodpfx Ajyrunlsg Aop - Heidenhain touch probe

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Dodpfx Agjyr Safe Ajup Rotary range (C axis) 360° Max. table load: 200 kg Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Control: Heidenhain Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Condition: used, Year of construction: 2018, x-travel 750 mm y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 6.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Dodpfxoyrt A Is Ag Aeup Prior sale is reserved.

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Dodpfoyrirrex Ag Ajup Tool magazine for 30 tools, SK 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 40 m/min, torque: 12 Nm, controller manufacturer: Heidenhain, controller model: iTNC 640, table width: 3,000 mm, table height: 80 mm, table length: 2,000 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, Initial commissioning: 2019 Control system: Heidenhain iTNC 640 incl. handwheel X-axis: approx. 3,000 mm Y-axis: approx. 2,000 mm Z-axis: approx. 1,250 mm A-axis: ± 96° C-axis: ± 270° Clamping table: 3,000 x 2,000 x 80 mm, T-slots 18H12 / 250 mm Dedpfx Agoyrdnno Ajup 2-axis milling head Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: max. 12 Nm Tool holder: HSK 63F Drive linear axes Feed rate for X, Y, and Z-axes: up to 70 m/min / 40 m/min Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 63 A Power requirement: 35 kW Dimensions, weights Total weight: approx. 15,000 kg Additional equipment - Minimum quantity lubrication - 2x 12-position tool changers - Enclosure of working area Optional at extra cost: - Blum laser tool measurement - Extraction system Machine condition Fully functional, in very good condition. Can be inspected under power.

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling Dujdpfxsyqxdbs Ag Aop • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Dsdpfx Agsyk S Hps Asup Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Dujdpeyqyfgjfx Ag Asp Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: used, Year of construction: 2017, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain table dimensions 1.100 x 610 mm number of tool places 40 Pos. tool taper SK 40 Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Dodjyn R Ndjpfx Ag Asup Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 Duodpfxjxmagze Ag Ajp table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 8,5 x 5,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - FASTEMS - incl. FASTEMS FPC-400 Pallet-System / 15-pos. - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - FASTEMS Computer is not working

Condition: excellent (used), Year of construction: 2012, operating hours: 4,961 h, functionality: fully functional, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 4,961 h, spindle nose: HSK-E32, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Including plenty of tool holders and clamping fixtures for dental manufacturing Duodpfxjyr Dife Ag Aop

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Dusdpfsyn Ncpjx Ag Aep Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,250 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 800 mm, table length: 630 mm, table load: 1,400 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,250 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel Paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Dynamic version linear axes IKZ (internal coolant supply) 80 bar with variovalve Scraper belt conveyor Tool changer plus Additional tool magazine ZM50 for a total of 92 tool stations Manual cabin door Manual cabin roof Laminated safety glass window Comfort operator panel External minimum-quantity lubrication Tool measurement A2 Blum (tool breakage/measurement) 3D probe M&H Internal air blow External air blow Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Electronic thermal compensation with control functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visibility aid and more… The machine can be inspected under power by prior arrangement. Machine is immediately available! Loading will be handled by us! Djdpfeyma Nkox Ag Aoup

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D 4th axis (rotary table) controlled incl. touch probe Dsdsyn Rfrjpfx Ag Asup Technical data: Tool holder: HSK63 Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: reconditioned (used), Year of construction: 2010, CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With Heidenhain iTNC 530 Path Control Year of Manufacture: 2010 Travel distances: X 500 Y 450 Z 400 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC rotary tilting table 500mm x 380mm Vertical tool changer with 120 magazine slots Full splash guard cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 ICS 40 bar with paper band filter Chip conveyor Dodpfx Agjyn Nx Re Asup 3D measuring probe BLUM tool measuring system in the working area 4-color signal lamp DMG Automation PH 150/8 16 pallets with Allmatic + Lang vices Coolant unit BEMA coolant nozzle 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Duodpfjycxiujx Ag Aep Control Heidenhain iTNC530 total power requirement --- kW weight of the machine ca. ca. 5,0 t dimensions of the machine ca. 5,10 x 6,10 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. Djdpfxoym Smbe Ag Asup FCA D-96257 Marktgraitz – loaded onto truck