Used Deckel Maho Dmu 80 T for sale (328)

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm Crodpfx Asyhwrceizei - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Credpfexwlgzjx Aizji Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 Credex D Nwkjpfx Aizei • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Crodpfx Aiez Dku Uozji Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: refurbished (used), Year of construction: 1999, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - new spindle: approx. 3.000 h Control: Heidenhain iTNC430 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12,000 rpm Spindle mount: SK40 tool magazine: 60 seats chip conveyor: . probe: Hexagon electric handwheel: Heidenhain operating mode: 4 Internal coolant supply (IKZ) and chip removal package: 20 bar / 900 l Tool measurement: Blum Laser Codezz Ag Topfx Aizeri High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: good (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, rapid traverse X-axis: 20 m/min, controller model: Siemens Sinumerik 840 D, total height: 2,100 mm, total length: 3,800 mm, total width: 3,600 mm, table load: 100 kg, rotational speed (max.): 15,000 rpm, overall weight: 1,600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year of manufacture: 2001 Csdey Nz Nrjpfx Aizori X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be arranged for an additional charge, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Cedpjzxf Inefx Aizsri Paper band filter

Condition: used, Year of construction: 2006, operating hours: 77,700 h, functionality: fully functional, machine/vehicle number: 1143 000195 3, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 64 kVA, controller manufacturer: Siemens, controller model: SIEMENS 840 D, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 630 mm, table length: 530 mm, table load: 400 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 34,700 h, spindle motor power: 64 W, number of slots in tool magazine: 120, input voltage: 400 V, pallet spaces: 5 euro pallets, Equipment: chip conveyor, documentation/manual, We offer this used universal machining center, a DECKEL MAHO DMC 60 T RS3, manufactured in 2006. Credpfozg U N Rox Aizsi Apparent power: 64.2 kVA Maximum rated current: 93 A Rated current: 100 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, Make: DECKEL MAHO Type of machine: DMC 635 V Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Tool holder: SK 40 x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Speed range: 10.000 U/min Codpfxo Ah Spwo Aizori max. Table load: 600 kg Operating time: 22.646 h Spindle operating time: 8.241 h Table dimensions: 790 × 560 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 20 bar

Condition: used, Year of construction: 2004, Rotary table from DMU 50eV / Series 1104..... Crjdpfx Aijy Amkzozji including C/B motors and Heidenhain measuring devices The rotary table was overhauled in 2023 all bearings and seals are new hoses etc. are also new

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Credpfxjx Rd Hpj Aizji Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm Crodpfxsx R Em Ds Aizji z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC Horizontal Machining Center with Pallet Changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC Horizontal Machining Center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 44,000 hours Travel distances Cods Agn Scopfx Aizsri X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse rate X/Y/Z: 40 m/min Positioning accuracy according to the manufacturer: ± 0.003 mm Repeatability according to the manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool interface: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to the manufacturer) Spindle torque: 110 Nm (standard version according to the manufacturer) Tool changer Tool magazine: 40 tool positions Tool interface: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling system (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum circuit breaker rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Without the pneumatic tensioning device! Dismantling and loading will be carried out by the seller. Cedpfxez N Eakj Aizsri Transportation will be handled by the buyer.

Condition: ready for operation (used), Deckel Maho TL MillPlus WM-12VAC-19 Monitor 51200097 / R12T600-OF SN: 1W0930010320 SN: max. 50 Watt / 12.1" OpenFrame / Touch, used, in good condition, 100% functional, scope of supply as shown in the photos. Codpfx Aie Aa Hlhjzeri

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Crodjz Hu Sijpfx Aizji Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D SolutionLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. Cjdoy Ryyropfx Aizsri • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (minimum distance, Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: good (used), Year of construction: 2007, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: MillPlus, overall weight: 10,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,800 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Crjdpfx Aiszk E U Sozei

Condition: used, Year of construction: 2012, Manufacturer: DECKEL MAHO, Type: DMC 1035 V, Year of manufacture: 2012, Serial No. 15425051954, Operating hours: 46,416, Spindle hours: 18,325, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline touchscreen, Tool magazine for 40 tools, SK 40, Travel range X/Y/Z 1,035 x 560 x 510 mm, 3 machine vices, Manufacturer: Roemheld, Type: HILMA NC 125, Jaw width 125 mm each, Chip conveyor, Chip cart +++ ATTENTION! This machine is part of an online auction! +++ Csdpfx Aisz Tlhiozsri

Condition: ready for operation (used), Deckel Maho Lasersoft 3D control panel, used, in good condition, 100% operational, scope of delivery as shown in the photos. Cedpfox Eq E Isx Aizsri

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 550 mm z-travel 500 mm control TNC 426 table-size 900 x 550 mm taper ISO SK 40 speeds 18000 U/min total power requirement 50 kW weight of the machine ca. 7 t Cedj Adchyjpfx Aizeri dimensions of the machine ca. 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling (IKZ) Chip conveyor Measuring probe Codpfx Ae Agn H Ujizsri Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Cedpfx Aozb Uz Dsizori Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Cedpfx Ajz Nhizoizjri Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Cedpfx Asz Sqq Toizeri Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.