Used Deep Fry for sale (1,303)

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 8,000 kg, operation weight: 8,000 kg, Year of construction: 2011, operating hours: 2,910 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, rubber tracks, For sale is a Yanmar ViO 80, manufactured in 2011, with only 2,910 original operating hours. The machine is in good, honest condition, fully functional, and ready for immediate use. Equipment: * ✅ Year of manufacture: 2011 * ✅ Only 2,910 operating hours * ✅ MS08 quick coupler * ✅ Hammer hydraulics * ✅ Auxiliary hydraulics with a swappable grapple line * ✅ Air conditioning (functional!) * ✅ Electric refueling pump * ✅ Work lights * ✅ 80 cm deep excavation bucket * ✅ Zero-tail swing (short tail) * ✅ Ready for use and fully functional The machine has been regularly maintained and is in good technical condition. Dkjdpfxezmiv Ss Aptet A test drive is possible at any time.

Condition: used, Year of construction: 2014, operating hours: 15,113 h, * Deep-excavation bucket * Central lubrication system * Camera * Power: 170 kW Dksdpfxezyzntj Aptot * Weight: 33,200 kg -----Internal vehicle number: 12435 Errors and prior sale excepted.

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Djdpfxjvca Rco Aptskt Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter Djdpfjy Rhzwex Aptekt - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Year of construction: 2018, condition: ready for operation (used), Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible. Djdpfx Aou Tiy Nsptokt

Condition: good (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2026, total height: 1,135 mm, total length: 82 mm, total width: 1,125 mm, type of input current: three-phase, overall weight: 170 kg, control voltage: 220 V, DGUV certified until: 07/2027, Frying machine, Riehle Wendomat 48 Immersion basket for a maximum of 48 pieces Removal device: Manual 1 stainless steel proofing trolley with tilting frame Temperature controller with safety thermostat Steam lid, drip tray Output: approx. 480 pieces/hour Stainless steel design, mobile Connection: 400V, 16A-CEE plug Dimensions: approx. 1125/2225 x 825 x 1135 mm, WxDxH Used equipment Dkedjxp Ug Uepfx Aptjt We have many other frying machines in stock!

Condition: used, Year of construction: 2014, operating hours: 5,561 h, Rubber tracks, used vehicle Dkodjzwzbzopfx Aptst Vehicle no. 3356, Takeuchi TB 1140 tracked excavator, year of manufacture: 2014, operating hours: 5,561, operating weight: 14,850 kg, fully enclosed cab with air conditioning, rear-view camera, rotating beacon, work lights, 1 x 800 mm deep-reach bucket with teeth, 500 mm rubber tracks, 2,500 mm dozer blade, hydraulic lines for attachments, Lehnhoff hydraulic quick coupler type SW10-3, Isuzu diesel engine with 77 kW. Please inquire for further details. Errors and prior sale excepted.

Condition: excellent (used), -Dimensions:800x920x900mm -2 tanks:2x25L -Series number:Y9/FRG4V2 -Model:Y9/FR Mounted on 2-door cabinet -3 baskets per 2 tanks -Voltage:220V Dkedswybyxopfx Aptot

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Djdoxx A D Tspfx Aptjkt

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 2,00,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Weight approx.: 200,000 kg Year of construction: 2,013 Condition: in working order Dkjdpfx Apezyd Hlotjt Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 210 mm, total length: 1,560 mm, total width: 645 mm, overall weight: 60 kg, input current: 16 A, power: 4.5 kW (6.12 HP), New machine 12-month warranty Advantages: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Includes 4-row turning basket for easy turning of Berliners (doughnuts) + Manual thermostat + Easy cleaning and maintenance Optional accessories available at extra cost: - Open immersion basket: + €369 net Technical data: - Capacity: max. approx. 24 pieces (depending on product) - Dimensions: --- Footprint: 880 x 645 mm (W x D) --- Overall: 1560 x 645 x 210 mm (W x D x H) - Power rating: 4.5 kW - Electrical specifications: 400 V - 3Ph - 50Hz - 16A CEE plug - Net weight: 60 kg Dkjdsw Ra S Tjpfx Aptot

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Dkodpfevn Sv Usx Aptjt Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, warranty duration: 12 months, total height: 210 mm, total length: 1,174 mm, total width: 645 mm, overall weight: 50 kg, power: 3 kW (4.08 HP), New device 12 months warranty Advantages: + Excellent baking quality at a TOP price-performance ratio + Robust, durable stainless steel construction + Includes 4-row turning basket for easy turning of Berliners + Manual thermostat + Easy cleaning and maintenance Special accessories available at extra cost: - Open immersion basket: + €349 net Technical data: Dedpfxow Ra R As Aptjkt - Capacity: max. approx. 16 Berliners (depending on product) - Dimensions: --- Footprint: 687 x 645 mm (W x D) --- Total: 1174 x 645 x 210 mm (W x D x H) - Power: 3.0 kW - Connection ratings: 230 V - 1Ph - 50Hz - Net weight: 50 kg

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg Dkodpfxezwlmhe Aptst oil level control circulation pump with Teflon infeed belt

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Djdpfxjuk Dwfo Aptjkt For spare parts only!!

Year of construction: 1986, condition: used, Technical details: core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW Dkodpfjw Dz Tajx Aptjt weight of the machine ca.: 6 t

Year of construction: 2013, condition: used, Used Riehle Conveyor Fryer, DLA600-3 Series The DLA 600 conveyor fryer is designed for continuous frying of products, ensuring consistent frying quality. Products are placed onto the loading belt and automatically conveyed into the frying tank. The conveyor belt then transports the product fully submerged throughout the length of the fryer tank up to the end. Submersion frying notably reduces frying times by up to 40%. Dedow Ngu Sjpfx Aptjkt The fryer can be used not only with oil; water, soups, sauces, marinades, syrups, etc. can also be used. Technical data: - Length: 2900 mm - Fryer tank length (frying zone): 2350 mm - Working width: 585 mm - Max product height: 55 mm - Maximum fat/oil volume: 260 L - Frying time in minutes: 55 sec – 11 min (depending on product type) - Power: 56 kW

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual Dodpfx Aozt Ai Esptokt with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs Djdpjy Sam Usfx Aptekt - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, Dkodpfxjy Ey E Ro Aptjt 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) Dkodpfx Apjx Ry Hrotot • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos Dodsft Sccopfx Aptjkt -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... Dkodpfx Apjzy Utietjt We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), - Dimensions: 486x965x1219 mm - Capacity: 25L of oil - Year: 05/2015 - Model: PFG-800 - Temperature: 20-200°C Dedjwybzcspfx Aptokt - Computer with adjustable programs - Power: 0.6 kW - Voltage: 220V - Weight: 135 kg - Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request price after refurbishment)

Condition: excellent (used), Year of construction: 2008, operating hours: 39,000 h, functionality: fully functional, drilling depth: 1,800 mm, drill diameter: 30 mm, Manufacturer: SFT Model: TBM 3-1500 Machine type: Deep hole drilling machine with BTA system Drilling diameter: 15 – 30 mm Drilling depth: 1800 mm Djdpfx Apjynui Ietokt Chip conveyor: included Control: SFT / PS 100 incl. control cabinet Frequency inverter: included Oil sump: included Coolant tank: 2,500 liters oil Coolant pumps: 3 units, each adjustable to 40 liters, 100 bar Signal beacon: included Tailstock: rotating and adjustable according to drilling length Clamping: hydraulic clamping operation Drill spindle: speed regulation available Paintwork: light grey / blue Loading station: automatic door Machine footprint: 7,000 x 1,200 mm Filter footprint: 3,000 x 800 x 1,250 mm Commissioned: late 2007 Recurring maintenance according to manufacturer’s specifications Available: end of March 2026 Operation: 2/3-shift operation