Used Deep Plow for sale (1,388)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Nwjdpfevvx Hiox Aa Deb Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Nedsxgu R Ijpfx Aa Djwb Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. Nedpfx Aouddimea Dswb MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Nwjdsxgic Eepfx Aa Deb Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t Nsdpfx Aewizn Uja Djwb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, working width: 2,400 mm, working height: 32 mm, working length: 800 mm, TECHNICAL DETAILS Working width X-axis: 267 - 2,400 mm Working length Y-axis: 120 - 800 mm Working height Z-axis: 16 - 32 mm 2 upper drilling heads + independent Y-axis grooving consisting of: Left head with 15 vertical spindles in X and Y-axis + one blade for grooving Right head with 15 vertical spindles in X and Y-axis + one automatic hinge installation unit Nwjdpfxoydn A To Aa Dob 2 independent lower vertical drilling heads in Y-axis each with 5 + 5 independent spindles MACHINE DETAILS Control: Numerical control with WoodWop software EQUIPMENT Automatic loading system with motorized roller conveyor Tank with vibrator for hinge storage and automatic feeding Unloading system with automatic roller conveyor

Condition: good (used), Year of construction: 1981, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm Nsdsqxvwyspfx Aa Dowb -Weight: 230 kg

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Nwodpfju Id H Ajx Aa Djb *

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow Nwjdpfsd S Tg Asx Aa Deb -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Plow: hydraulically adjustable -Working width: max. 3200 mm Nedpfxodz U Sps Aa Dewb -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Year of construction: 1986, condition: used, Technical details: Nwedpfxew Dz Tae Aa Dob core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW weight of the machine ca.: 6 t

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Nedex Ngxropfx Aa Dewb

Condition: like new (used), Year of construction: 2019, operating hours: 454 h, functionality: fully functional, machine/vehicle number: 7438, drilling depth: 3,000 mm, total length: 11,515 mm, total width: 5,415 mm, total height: 2,350 mm, overall weight: 14,450 kg, spindle speed (min.): 13 rpm, spindle speed (max.): 1,800 rpm, rapid traverse Z-axis: 6,000 m/min, type of input current: AC, input voltage: 400 V, Deep drilling machine, in excellent conditions due to very limited usage - 454 hours. Tooling of different diameters available and included in the price. Selling because of business change. Nwsdpfx Aaexzq Ryo Dsb

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um Njdou Nyxwjpfx Aa Djwb table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. Nodet Hwucopfx Aa Dswb * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t Nwodpfst Hwvaox Aa Dsb dimensions of the machine ca. m

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t Nodpfx Aot Hw Aysa Dewb dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1990, core drilling diameter max. 6 mm bore depth 350 mm swing diameter mm total power requirement 15 kW Nwsdpjt Hw A Tsfx Aa Djb weight of the machine ca. 3500 kg dimensions of the machine ca. 5000 x 1200 x 2200 mm

Year of construction: 2013, condition: like new (used), Name: Plowshare mixer / Oblique paddle mixer Manufacturer: MAP Type: WBHP 15000 Year built: 2013 Hours of operation: Zero Material: Mild steel S235J Driving force: Here you can choose between 160 kW, 200 kW and 250 kW Description: Single shaft horizontal mixer Model: Batch mixer Usable volume: 4.500 - 10.500 liters Equipment Tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Nwodpsn Ur S Ujfx Aa Dsb Empty weight: Weight 8000 kg Technical doc.: Yes Message: Since the tools are screwed, it can be used both as a plowshare mixer and as an inclined shovel mixer. This horizontal mixer is a customer return without operating hours. The mixer is completely overhauled before delivery Condition: New and workshop revised Price: On demand

Condition: used, mileage: 2,10,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: deep orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 HP) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine output rear, C, * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service front axle load increased 10.5 t * Gearbox G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * Permanent all-wheel drive * Mercedes Powershift 3 gearshift * Power take-off gear for tipper pump, * Meiler three-way tipper with Bordmatic on the left * Municipal hydraulics from Schmidt * Mounting plate for snow plow size 5 * Turning assistant * Differential locks * Leaf springs * Rotating beacons * Electric. Windows and mirrors * Air conditioning * Additional heating * Front tires 385/65R22.5 * Rear tires 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high stand on right side of vehicle * Parking device System A * Küpper-Weisser single-chamber spreader type IMSSN E29035HFA, year 2015 * Stainless steel container, * Duplex frame * Stainless steel control cabinet * Container volume 3.5 m3 * Tank length 2900 mm * Screw conveyor device Nwodpfx Aov Dpdboa Deb * Spreading material distributor "OptiWet" * Spreading plate 2-10 meters * Wet salt device - brine tank contents 2240 l * Driven by the vehicle's municipal hydraulics * RollTec 12 t set-down device * "Vpad SN" control * Schmidt TARRON MS 34.1 snow plow * incl. set-down devices * the entire model year 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper combo * Splash guard (rubber) * Adjustable snow dust protection (cloth) * Plow lighting * and much more * Subject to errors and prior sale

Condition: used, mileage: 2,10,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: deep orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 HP) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine output rear, C, * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service front axle load increased 10.5 t * Gearbox G 230-12/11.7-0.78 Nwedpfov H Hmxex Aa Dob * Transfer case VG 2800-3W/1.45-1.04 * Permanent all-wheel drive * Mercedes Powershift 3 gearshift * Power take-off gear for tipper pump, * Meiler three-way tipper with Bordmatic on the left * Municipal hydraulics from Schmidt * Mounting plate for snow plow size 5 * Turning assistant * Differential locks * Leaf springs * Rotating beacons * Electric. Windows and mirrors * Air conditioning * Additional heating * Front tires 385/65R22.5 * Rear tires 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high stand on right side of vehicle * Parking device System A * Küpper-Weisser single-chamber spreader type IMSSN E29035HFA, year 2015 * Stainless steel container, * Duplex frame * Stainless steel control cabinet * Container volume 3.5 m3 * Tank length 2900 mm * Screw conveyor device * Spreading material distributor "OptiWet" * Spreading plate 2-10 meters * Wet salt device - brine tank contents 2240 l * Driven by the vehicle's municipal hydraulics * RollTec 12 t set-down device * "Vpad SN" control * Schmidt TARRON MS 34.1 snow plow * incl. set-down devices * the entire model year 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper combo * Splash guard (rubber) * Adjustable snow dust protection (cloth) * Plow lighting * and much more * Subject to errors and prior sale

Condition: good (used), functionality: fully functional, The SEALPAC MINI is a durable, semi-automatic tray sealing machine, highly valued for its compact footprint, robust build, and ability to produce high-quality seals for small-to-medium batch processing. Specific Technical Highlights Robust Power: Has an electrical connection 3 x 400 V and a Power of 1.5 kW. Nwsdpfexyv I Uex Aa Dsb Durable Build: Despite being a compact model, it has a weight 160 kg, indicating a strong, industrial-quality frame and components. Proven Longevity: Showcasing the lasting quality and reliability of SEALPAC engineering. Operational Benefits (General MINI Class) Compact & Mobile: The machine belongs to the MINI class, meaning it has a small footprint, making it easy to fit into test kitchens, specialty production areas, or smaller facilities. High-Quality Sealing: As a tray sealer, it provides a hermetic, tamper-evident seal, crucial for product safety and minimizing liquid leakage. Semi-Automatic Efficiency: The operator loads the filled trays, and the machine executes the precise cycle of sealing and film cutting, providing a good balance between operator control and production efficiency. Tray size: 289 x 254 mm, deep 23-79 mm, cap 1413-4047 ml Hygienic Construction: SEALPAC machines are built with stainless steel for durability and easy washdown.

Condition: excellent (used), functionality: fully functional, The Magurit Fromat 042 Profi is a robust, hydraulically driven guillotine cutter designed for the efficient size reduction of frozen blocks. It is essential for processors needing to prepare deep-frozen meat, poultry, fish, or fruit for further grinding, mixing, or chopping. Performance & Size Reduction Frozen Block Processing: Specifically designed for the size reduction of frozen blocks of meat, poultry, fish, fruit, and other materials. Guillotine Cutting Action: Utilizes a robust, hydraulically driven guillotine cutter for powerful and efficient size reduction. Powerful Motor: The machine is identified as the Fromat 042 Profi 4 kW model, indicating a strong motor capable of handling frozen products. Operational Benefits Increased Downstream Efficiency: Preparing frozen blocks with this machine significantly reduces stress and wear on subsequent equipment like bowl cutters or grinders. Hygienic Construction: Features a complete stainless steel body and accessible components (as pictured) for durability and ease of washdown. Nwedpfsxxk E Eox Aa Djb Safety Features: Includes high side shields and an emergency stop button (as pictured) to ensure a safe operating environment.

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics Nedpfx Aaewg R I Ee Dswb The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: Nwjdpfxexd T Hcj Aa Deb - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon