Used Dimter for sale (50)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Codpfow Sy T Hjx Aa Njrb Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW Codpfx Aaoy Ixpas Nsrb • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Year of construction: 2005, condition: ready for operation (used), This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. • Groove guidance and hydraulic nuts Csdpsyaihpefx Aa Nerb • Working range (wxh): 230 x 120 mm • Number of spindles: 5 • Variable feed speed: 4 – 30 m/min • Spindle power output: bottom (infeed): 4 kw / right / left: 7. 5 kw each / top: 7. 5 kw / bottom (outfeed): 4 kw Additional equipment • Includes approx. 70 cutter heads Z4 • Several hundred new serrated-back knife blanksIt is possible to buy WEINIG Unimat 500 alone (without Weinig Rondamat 931 profile knife sanding machine and additional tools) for a price of 37.000€

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m Crsdpol H E Taefx Aa Nob The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Credpfx Aaoxmvxyo Neb Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Using raw material 24 mm thick and 98 mm wide. The length of the raw material ranged from 200 to 60 m. dismantled

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Grecon Dimter OptiCut 304R Optimizer Minimum input wood length: 900 mm (with cross chain infeed) Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Lowering, cutting, and acceleration time: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Max. wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade speed: 4200 rpm Max. feed speed: 170 m/min Outfeed belt conveyor with 6 pushers Cutting modes: 1. Fixed length cutting 2. Board length optimization for maximum output 3. Defect removal with chalk marking Total line length: 21 m Year of manufacture: 2000 Cedpsyxltysfx Aa Norb

Condition: like new (used), spare parts + accessories Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Cedpfslifbdex Aa Njrb Grecon Cook Bolinders

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GRECON Ultra automatic finger jointing line Year of manufacture: 2003 Technical condition: very good, machine regularly serviced Technical data: • input workpiece length: 150–1000 mm • timber width: 40–205 mm • timber thickness: 20–80 mm • output / pressing length: 6100 mm • pressing force: 120 kN / 12 t • max. cross-section for 10/11 mm finger joints in softwood: 100 cm² • max. cross-section for 10/11 mm finger joints in hardwood: 80 cm² Performance: • vertical finger-jointing: Cjdpjy Amk Uofx Aa Nsrb • Ultra: 15.2 m/min Equipment / design: • 600 mm wide package milling unit • manual turning table • automatic turning of material and transfer to the press • the machine operates in a fully automatic cycle • 1 operator required Possibility of professional dismantling, assembly, commissioning, and operator training for the machine.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter Crodpsv Diy Aefx Aa Nob electric thickness adjustment

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Cedpet Ir Nqefx Aa Nerb Available immediately. Spare parts and Documentation included.

Condition: repair required (used), functionality: not functional, Keilzinkenanlage dimter HK 400 Fifteen thousand seven hundred EUR 15,700 EUR Finger-jointing plant for timber packages Wood input lengths: 800 - 6000 mm Milling height: 285 mm (optionally 300 mm) Colour: blue Requires repair, sold as-is in current condition The plant has already been dismantled and is stored in the warehouse in Achern Very much material for little money All technical documentation is available Cedpfxjvi Hw No Aa Nsrb We will also provide technical support and answer all your questions

Condition: used, Year of construction: 1999, functionality: fully functional, mount diameter: 50 mm, type of input current: three-phase, tool diameter: 50 mm, tool length: 330 mm, input frequency: 50 Hz, Tool presetting device WEINIG Opticontrol Swing diameter: 0 - 300 mm Tool length: 0 - 330 mm Codpfx Aajxwnvro Nsrb Shank diameter: 50 mm

Condition: ready for operation (used), Glue application unit with 2 rollers - Glue specification for package height 300mm using 1 application roller and 1 dosing roller - 1 x left Crjdoht Rtaepfx Aa Njb - 1 x right - Suitable for DIMTER HK 200 + HK 400 + HK 800 + HK 1000 Spare parts Dimter Accessories dimmer

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Csdpfx Ajyu Urisa Nsrb Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Crodpfx Ajyu Uq Eoa Neb Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm Csdpsx S Sk Eofx Aa Njrb • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power Cedpfx Asylmmmoa Nsrb • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm Csdox D I Nrjpfx Aa Norb • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: good (used), The machine has been overhauled Credpev Ihdzsfx Aa Njb many new parts new cables new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Credpfx Aaoyxwyre Nsb Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Machine measures : Infeed : L 7600 x B 800 x H 1100 mm / Sav : L 1400 x W 1200 x H 1650 mm / Outfeed : L 5200 x W 600 x H 900 mm. Overall working hight : 850 mm Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Codextxg Hopfx Aa Norb Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: ready for operation (used), functionality: fully functional, Roller conveyor Cedpfjyxmb Eex Aa Njrb Length: 7500 mm Width: 600 mm Height: 1700 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR Crjdpfx Aaorf Ty Se Nsb TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm Codpfjypvdiox Aa Njrb - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Csdpfxjyngnis Aa Nerb