Used Disc Flange for sale (8,557)

Condition: used, Used GEA Westfalia model SC 6-01-576 stainless steel disc bowl separator. - Manufacturer: GEA Westfalia - Model: SC 6-01-576 - Permissible density of product to be treated: heavy liquid phase 1.1 kg/dm3 and solid phase 1.4 kg/dm3 - Maximum speed rated: 11.970 rpm. Fsdpfx Aszbucusp Dspn - Drive: flanged electricmotor with coupling 5.5 kW, 1740 rpm, 50 Hz, Ex II 2 G rating - Included: switchboard with control panel - Mounted on a skid

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. Fpsdpfx Aszx Rz Hsp Den The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve Fjdspul U Ujpfx Ap Dopn -Flange connection: T-piece -Type: DN100 -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 45 kg

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Flange connection: T-piece -Type: DN100 Fpodpfx Apjpul U Rs Dsn -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 34 kg

Condition: good (used), Year of construction: 2016, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, – Capacity: 4 mm – Hydraulic roller adjustment – Foot pedal operation – Infinitely adjustable speed – Emergency stop – Documentation Fodpjz Ha Amjfx Ap Depn – 400V

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Fsdpfx Aoy Tni Tjp Depn

Condition: excellent (used), first registration: 09/2009, tire condition: 50 %, color: other, suspension: air, total length: 13,600 mm, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - air suspension - Disc brakes - Wooden floor = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Technical condition: very good Visual appearance: very good Fsdpfxoz Rnpws Ap Dspn

Condition: good (used), Year of construction: 1975, overall weight: 6,000 kg, total width: 1,800 mm, total length: 5,000 mm, total height: 2,900 mm, sheet thickness (max.): 12 mm, Flanging and dishing machine Schleiffstein - KbOL 3012 Tank Head Manufacturing  Dishing and Flanging machine up to 12 mm in 260 Nm/mm2 Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300 Fully hydraulic machine Field off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanks Torispherical heads Ellipsoidal heads Spherical bottoms Dished bottem tank construction Flat bottems Fpedpfxszz Ipgs Ap Dsn Sperical dished bottoms Cones     Max. workpiece: 6500Ø Maximum sheet thickness: 12mm Max. dishing radius: 300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 50mm Max height on dishing side:350mm Working speed: 0 - 5000mm/min. Power: 20kW Length: 5000mm Width: 1800mm Height: 2900mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Fpjdpfoz Aquzex Ap Don

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. The machine is in very good condition. Ready for use. Fpedpfxsy Ui Tie Ap Den

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Fjdpsvzw Tfsfx Ap Dopn - without electric motor

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, mount diameter: 3,000 mm, For sale: Pullmax F13C forming machine for steel bottoms/ends. The machine is in good condition and ready for operation. Inspection possible. Maximum bottom thickness: 13 mm. Fodpfx Apjzrt Aaj Djpn Maximum diameter: 3000 mm. Included: - Upper forming roll R50 and R30, - Lower forming roll R50.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Fpedpfx Apjz Evg Es Den Information available upon request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Fsdpfjzvlm Ejx Ap Djpn Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: good (used), Year of construction: 2022, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Fedpjzphtnjfx Ap Depn

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Fodpfx Aoztxpnsp Djpn Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: used, functionality: fully functional, Year of construction: 2020, Manure spreader with short disc harrow, Volmer T Rubber TRG-W8000, year of manufacture 2020, nominal width 7500 mm, 60 toothed discs 510 mm, 2x16 manure distributors Agrar Pro with 50 mm hose diameter, 10 bar pressure hoses, nitrogen bladder for spring mechanism, 3-point linkage, edge disc 430 mm, side plate on the right, pipe roller 550 mm, hydraulically foldable, warning sign with LED lighting, serial number 090804155. Fpsdez Hwvkepfx Ap Don

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Fjdpfozbu R Eex Ap Djpn

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2004, total length: 11,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,990 mm, Year of construction: 2004, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension - Disc brakes = Notes = 2004 SCHMITZ CARGOBULL SCF24G 40FT High Cube chassis with ABS/EBS, SAF axles with disc brakes, lift axle on the third axle, unladen weight: 5,570 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 8/7/3 mm; tread depth right: 0/7/0 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 50%; tire tread depth right: 5% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 45%; tire tread depth right: 45% Rear axle 3: Lift axle; Max. axle load: 9000 kg; tire tread depth left: 20%; tire tread depth right: 5% Weights Unladen weight: 5,570 kg Payload: 33,430 kg GVW: 39,000 kg Fsdpfx Aez Ia Ryjp Dopn Functional Body brand: Schmitz Cargobull SCF24G Condition Overall condition: average Technical condition: average Optical condition: average Identification License plate: OH-74-VD Further Information Please contact Arne Honingh for further information.

Condition: like new (used), Year of construction: 2004, Grinding wheel diameter: 500 mm Grinding table width in front of the wheel: 240 mm Grinding table tilt downwards/upwards: 45/30° Fpodpfx Apezvm N Uo Dsn Grinding wheel speed: 1500 rpm Drive motor: 400 V, 4 kW Weight: 280 kg

Condition: excellent (used), Year of construction: 1988, Usable grinding wheel diameter: 500 mm Table size: 400 x 800 mm Table tilt downwards/upwards up to: 45/30° Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 2.2 kW Fpjdezvm Svjpfx Ap Dsn Space requirement: 950 x 800 x 1200 mm Weight: 230 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Grinding unit Gluing system Edge pressing unit Edge trimming unit Radius milling unit Rounding unit Fpodpfsz I S Tmsx Ap Djn Edge scraping unit Glue scraping unit Brush unit

Condition: used, maximum load weight: 23,770 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2004, total length: 13,940 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2004, Additional information: * Type | First axle: Hankook R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Hankook R * Tire size | Second axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension Additional features: * Rear doors * Homepage * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. Fodpfx Apoz I H D Tj Dopn The prices listed exclude BPM and are only valid for export.

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Fpodpoxaazlsfx Ap Dsn Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive Fpodpfsrp Ik Sjx Ap Djn -Connection: DN 40 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 7.7 kg/pc.