Automatic flute laminator for sale
Identified location: Ashburn (US) (Edit)
Automatic laminator LAM-503 laminator Kft
The machine is 100% operational, in perfect condition, ready for production.
It is an advanced machine with high efficiency, suitable for service foiling.
Production Hungary.
Technical data:
Brramheijl
Max sheet format: 520mm x 720mm
Min weight: 110 gsm
Max weight: 600 gsm
Working temperature: 80-145 ° C
Max working speed: 31m / min
Weight: 950 kg
380V power supply
In addition, air 6 Bar
A steel, chrome cylinder with a diameter of up to 230 mm guarantee...
Foliant Gulliver Compressor 520A automatic laminator
The most equipped foliar in Foliant’s offer.
A fully automatic machine, ideal for digital printing.
Very good condition, ready for production.
Suqpdw
Description:
– feeding from a high pile (elevator)
– automatic separator
– hydraulic pressure of rollers
– sheet straightening module
– built-in compressor for blowing and suction (Becker)
– shaker for receiving sheets
Feed system: pneumatic belt
Max format 52x74cm
Height of the feeding pile: 35...
Automatic sheet laminator
Br8rxh0y9n
Size max 100x140
Size min 35x50
Speed up to 5,000 sheets
Suitable for E, B, C lamination
Suitable for solid to solid lamination
Available now
GMP Protopic Plus 520B laminator + Belt feeder 35
The machine is in very good condition.
It is an advanced machine with high efficiency.
Korea production.
Br8dpitzht
Possibility to work in a full or semi-automatic machine.
Technical data:
Max sheet format: 520mm x 800mm
Min sheet format: 210mm x 200mm
Min weight: 120 gsm
Max weight: 350gsm
Working temperature: 80-140 ° C
Max working speed: 15m / min
Weight: 370 kg
230V power supply
Installed power of 2.5kW
In addition, air 6 Bar.
A steel cylinde...
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
Cevapcici automatic machine
Ewoxibc2
Capacity: 10.000 pc/h
Age: ca. 1960 // Power: 4‘500 sheets / h
Format: 32 x 44 cm
Xb8aj0od
Videolink is from an identical machine.
straightening unit
sheet width (max) 350 mm
sheet thickness (max) 10 mm
number of levelling rolls 5
diameter of levelling rolls 100 mm
distance of levelling rolls 77.5 mm
feeding rolls 2 x 2 pc.
with loop control
coil cradle
sheet width (max) 330 mm
max. outer diameter of coil 1300 mm
length appr.: 4900 mm
Q9shwhb7
width appr.: 1820 mm
height appr.: 2030 mm
weight appr.: 2500 kg
Kap Saw Reinchardt NC 700 automatic
Manufacturer Reinchardt
Model / machine type NC 700
Year of production 1998
Machine category Kapła Kapowa
Location
H8uf7cg
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT
Lico LNT-42S
CNC Multi-Slide Automatic Turning Center
Siemens 840D Control SL
Mfd. 2015
SN: T102014
L8cscpeb
Additional Servo Compound Slide
Back-End Machining 8-Position Non-Live Tool Turret
Chain-Belt Type Chip Conveyor
Oil Mist Collector
Transformer For Siemens, 3-Phase, 30KVA, 400/200
Turret Mounted Polygon Generator
VDI-30 Sub-spindle with Through Coolant
Upgrade to VDI-30 Sub-Spindle with Through Coolant
5000 RPM
Barberan Throughfeed Automatic Spray Stain Line
Only 8,000 Hrs
Barberan Motorized Infeed Conveyor, Model: MVB 3500/1800
Barberan Cleaning Brush with Suction, Model: LP 1800
Barberan Automatic Spray Booth 8 Arms, Model: RR B8
Barberan Transfer Table with Suction, Model: MTB 3500/1800
Barberan Drying Tunnel (Convection), Model: TSP E MT
Barberan Motorized Outfeed Conveyor, Model: MMV 3500/1800
Only 8,000 Hrs
Line Speed 1-12 m/min. ( 3-39 Ft/Min )
Carousel RPM 1-25 RPM
8 Spray Arms
Liquid Recovery ...
Used automatic stirrup bender, excellent condition
Bnrwnhkkxm
Serial No. 011
Gbvr02i2
Capacity 820mm rounds, 1200mm x 820mm rectangular
Blade Size 9680mm x 1.6mm x 67mm
Twin Pillar Yes
Input 415/3/50hz
Speeds 15 - 90m/min
Vice opens 1200mm
Twin vices Yes
Stroke of feed vice 1000mm
Control Bomar
Fitted with Coolant
Equipment Hydraulic infeed tracking 2300mm x 1350mm, Out feed tracking 2000mm x 1350mm
Length 4500mm
Width 1400mm, with tracking 5700mm
Height 2700mm
Nett weight actual. 7,890 Kgs. / 7.76 Tons.
Brenta resaw machine type DR125
Machine specifications:
- With automatic centering unit
O0apt
- Flywheels 1250 mm
- Hydraulic feeding
Switchgear, control system, UV light, automatic burner control
-Type: Honeywell EC7850 A 1122
P7i89n
-Price: per piece
-Number: 9 pieces
-Dimensions: 130/135/H145 mm
-Weight: 1.3 kg
Lico LNT-65S-S4-T2-PL
CNC Multi-Slide Automatic Turning Center
Mfd. 2013 (Delivered 2015)
Brgf0fz8op
SN: T101004
Additional Servo Compound Slide
Back-End Machining 8-Position Non-Live Tool Turret
Chain-Belt Type Chip Conveyor
Oil Mist Collector
Transformer For Siemens, 3-Phase, 30KVA, 400/200
Turret Mounted Polygon Generator
VDI-30 Subspindle with Through Coolant
Upgrade to VDI-30 Subspindle with Through Coolant
Turnkey Transfer from 42mm Machine to this 65mm
turning diameter over bed 32 mm
spindle passage 32 mm
turning length 250 in einem Zug mm
bar material dia. 32 mm
control Mitsubishi Meldas 500 L
number of controlled axis 7
turning speed range 8000 U/min
power requirement 5,5 kW
Subspindel speed range 6000 U/min
power requirement 2,2 kW
number of tapers in turret head 10(20) + 10(20)
Spindel speed of driven tools 5000 U/min
weight of the machine ca. 3,5 t
dimensions of the machine ca. 7,0 x 1,9 x 1,9 m
Sliding headstock lathe with 2 turret...
Available May 2021
H&M HM-Z 4 Axis Automatic Upstroke Crosscut Saw for straight & angled cutting
9.9m infeed equipped with rollers (and steel infil pieces) to within 2m of the saw, with sheet table thereafter. This prevents the timber overrunning. This length will give a 8m clear loading capacity
Dsjzirp
Larger HM-Z saw unit with 7.5hp motor
CNC centre line cutting with 700mm blade
Maximum cutting height 250mm
CNC 4th axis for compound cutting
Table rotation down to 0 degrees
6m outfeed tabl...
Serial No. 990113460
Control Fanuc
Table size 2150mm x 1100mm
Table load 1000 kgs
X Axis Traverse 2040mm
Y Axis Traverse 1020mm
Z Axis Traverse 400mm
Distance between columns 1400mm
Speeds 27000 rpm
Bokoj2en3r
Cutting feed rate 1 - 10000 mm/min
Feed rate rapid travesre X = 25000 Y= 25000 Z= 18000
Spindle nose to table 150mm - 1100mm
Spindle taper 40 BT
Automatic tool changer Yes
Number of tools 40
Tool length 300mm
Tool diameter 80mm or 130mm with adjoining pockets empty
Tool weight 8kg
ATC tim...
GRECON automatic cross cut saw, type 502
Machine specifications:
- Max. infeed length 6100 mm
Ezbuapb
- Automatic push infeed
- Max. cutting height 150 mm
- Motor power 5.5 kW
- Outfeed system
High-frequency ignition device, heating, gas and oil burners, automatic gas burner control, gas relay, control box, burner control
-Manufacturer: Kromschroder, burner control automatic burner control unused Ovp
-Type: IFD 454-3 / 1 / 1TZ
Brpueaqzu2
-Voltage: 220/240 V
-Quantity: 6 pieces available
-Price per piece
-Dimension box: 190/140 / H110 mm
-Weight: 0.9 kg/pc.
serial number 121413
Eh3v77nzy
weight of the machine ca. 1,3 t
cutting diameter 400 mm
saw band length 5700 mm
cutting width 1,3 mm
Control Kasto Compact Control
cutting width at rectangle material 400 x 400 mm
feed length 600 mm
cutting speed 20- 130 m/min
drive motor 4,0 kW
range L-W-H 2,42 x 2,4 x 1,75 m
weight of the machine ca. 2,42 t
full hydraulic automatic band saw with double coloum
O0r78jcl
- chip conveyor
- 2x linear sliedeways
- coolant system
- hydraulic band clamping
Technical details
cutting diameter 310 mm
saw band length 5000 x 34 x 1,1 mm
cutting width 520 mm
cutting speed 20 - 140 m/min
total power requirement 8 kW
weight of the machine ca. 3,0 t
Additional information
Automatic Bandsaw + Magazine
Cutting range:
- Round: 310 mm
- Flat (Width x Height): 520 x 310 mm
Mitre left:
- 75 deg. round 310 mm, flat width x height = 520 x 310 mm
- 60 deg. round 310 mm, flat width x height = 450 x 310 mm
- 45 deg. round 310 mm, flat width x height = 350 x 310 mm
...
Serial No. 160
Capacity 520mm Diameter or 520mm x 520mm Square
Input 415/3/50 ac 5.5 kW
Speeds 65'-426' / 20 Metres-130 Metres Per Minute
Vice opens Hydraulically
Twin vices Yes
Stroke of feed vice 500mm
Fitted with Coolant
Length 3400mm
Width 2200mm
Height 2350mm
Cavtaxua
Nett weight actual. 3,880 Kgs. / 3.8 Tons.
WEINIG automatic outfeed and stacking system
- outfeed roller conveyor with cross outfeed
- cross belt conveyor
Bshu8ejhus
- Manual bundling station
- roller conveyor and cross transport
- automatic stacking system
Metal band saw, band saw machine, automatic band saw, automatic band saw machine
-Manufacturer: KASTO
-Type: SBA 220 AU
-Drive: 2.2 kW
-Saw speed: continuously 20 - 120 m / min
-Cutting width: 90 ? 220 mm
-Cutting height: 220 mm
-Material: feed multiple stroke
-Cutting pressure regulation: stepless
-Saw band: length 3800 mm
-Dimensions machine: 1900/2500 / H1280 mm
Bk0menmadl
-Weight: 1114 kg
automatic feeder ja
material length 460 mm
material width 320 mm
weight of the machine ca. 2 t
Dpj7hy7
documentation ja
saw blade diameter 275 mm
cutting diameter 90 mm
capacity 45 degrees: flat 150 x 100 mm
mitter cutting - all-position 45 °
Benrtq088a
cutting speed 16/32 m/min
number of spindles:6
spindle passage:67 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles with passage max. rated diameter 67mm
prepared for pick up for rear machining in pos. 6 (pick up optional)
threading clutches, stock stand and reel
coolant pump
[optional: cleaning and revising]
more pictures on request
optional customizing:
Jvvvwm
CNC upgrade with modern CNC compound slide(s) on cross positions
The machine could be visited under power.
The scope of delivery regarding...
Serial No. 6018 - 106 -149
Capacity 520mm Diameter
Blade Size 7239mm x 50mm 1.3mm
Input 380/3/50hz
Speeds 20 - 130 metres per min
Vice opens 530mm
Twin vices Yes
Stroke of feed vice 500mm
Multi Feed Yes
Fitted with Swarf conveyor, Coolant
Equipment Roller tracking, 3000mm x 600mm
Length 4060mm
Width 2300mm
Height 2200mm
Nett weight actual. 5,090 Kgs. / 5 Tons.
Bhk7plc3xu
cutting diameter 420 mm
Bd7eaqy90
saw band length 6300 mm
cutting speed 20-130 m/min
cutting width at rectangle material 420x420 mm
cutting pressure einstellbar
chip conveyor
weight of the machine ca. 3 t
feeds slides 7mm Rollenbahn
Control
total power requirement 8 kW
High-frequency ignition device, heating, gas and oil burners, automatic gas burner control, gas relay, control box, burner control
-Manufacturer: Kromschroder, burner control automatic burner control
Mezdiyy
-Type: IFD 454-3 / 1 / 1TZ
-Voltage: 220/240 V
-Dimension: 160/80 / H135 mm
-Weight: 0.9 kg
cutting diameter max. 220 mm
miter 90 Grad
Brxcyiqubs
Manufacturer CITIZEN
Type E 32
Year of manufacture 1999
Machine weight approx. 4800kg
Control Mitsubishi
Fit8t08j0
Driven tools yes
Y-axis yes
7 axes
Option long parts with ejection to the rear
Transmission software
Additional pump IKZ
JBS guide bushing
Main and pick-up spindle
Backside processing
number of spindles 6
spindle passage 27 mm
turning length 3.500 mm
Control INDEX
number of longitudinal slide 6
number of cross-slides 5
Multi-spindle lathe with spindle braking device | INDEX MS 25 E
Machine is supplied with extensive equipment:
- 4x Parting holder
- 23x Base body for clamping heads
- 12x Clamping tube
- 12x Feed tube
- 1x Cross drill
- 1x Transverse threading component
- 1x Cross slot milling component
- 1x Thread chaser with accessories
- 1x Quick drilling spindle lo...
Serial No. 980419
Capacity 330mm dia, 300mm x 300mm or 350mm x 250mm
Input 400/3/50 3.7kW
Bfkakkocj2
Speeds 25-80 m/min
Vice opens 400mm
Twin vices yes
Stroke of feed vice 500mm
Multi Feed yes
Fitted with bundle clamps, swarf screw & coolant
Length 7' / 2133mm
Width 6'4" / 1930mm
Height 4'4" / 1320mm
Cutting range round 430 mm
Cutting range square H x W 430 x 430 mm
Cutting range flat H x W 430 x 430 mm
Clamping range 0 - 430 mm
Smallest dimension to be sawn 10 x 10 mm
Smallest cut-off length 6 mm
Shortest remaining piece length in automatic mode
Chdiy7dc
(only possible with geometrically perfect surfaces) 35 mm
Shortest remaining piece length in single cut 10 mm
multiple-up production
with tools
Cfmku0u0g
transfer unit UEB 550 A fitted with clocked air nozzles for the separation
of inner cuts
friction feeder FR 550 Servo C (for free)
serial number 4228
250 mm
Brxcuwcqrg
automatisch
Used machine
Year of construction: 1991
condition: normal
incl. drill head for Hettich 52 / 5.5 with the number 270-4020
for all variants of furniture fittings
drilling head with 4 spindles
Magazine for 35 hinges
Cycle time per operation approx. 4 sec
Engine 1,1 kW
availability: short term
Location: Röllbach
Slrqonitn
Fully Automatic Punching System Kugler 341-2
Baujahr / Year 1994 - Serial-No. 1724
Arbeitsbreite / Working width max. 500mm
Bi0gbafj87
Format / Sizes min. 120 x 105mm
Format / Sizes max. 500 x 500mm
Stanzstärke / Punching thickness max. 3mm
Länge ungestanzte Seite / unpunched length min. 85mm
Länge ungestanzte Seite / unpunched length max. 360mm
Mechanische Taktleistung per Stunde / Mechanical cycles per hour 6.600
Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous runni...
Serial No. 598642
Capacity 530mm dia, 530mm x 520mm
Input 415/3/50 7.5kW
Speeds 17 - 110 m/min
Vice opens 540mm
Twin vices yes
Stroke of feed vice 600
Multi Feed yes
Fitted with Chip removal brush, swarf conveyor and coolant
Length 13' / 3.90m
Bfkaihv07u
Width 7'6" / 2.28m
Height 7'8" /2.33m
Nett weight actual 4770 kgs/ 4.7 tons
cutting diameter 320 mm
band length 4660 x 34 x 1,1 mm
cutting lenght max. 1100 mm
sawing motor 4,0 kW
weight of the machine ca. 2,6 t
range L-W-H 2,8 x 2,0 x 2,0 mm
used 2 coloumn automatic bandsaw
- chip conveyor
- coolant system
- Mitsubishi E 1032 control
Rovdkfs
- some bands
- 320 x 320 mm cutting area
- package clamping
automatic carton strapping machine, SMB- used - :
Bsf7k77usa
Prices ex location: 1.250.-€ (net)!
Manufacturer: SMB Schwede Masch. Building Ltd.
Model: Strapping machine SMB ST 1 . 800oc
Year of manufacture: 2014
Condition: good
Available: immediately
Location: NRW
Used band saw BEHRINGER HBP 420 A for material up to 420mm. Saw band dimensions 5800 x 38 x 1.3mm. Cutting speed: 17-110m / min.
Total consumption in kW: 8,5
Overall size (lxbxh) in mm: 3000 x 2200 x 1850
Bsjcpo88vm
Total weight in kg: 3200
Mode of operation: mechanical/ conventional control