Used Disk Hacking for sale (670)

Condition: excellent (used), Year of construction: 2019, operating hours: 174 h, functionality: fully functional, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 12 months, tank capacity: 40 l, total height: 1,316 mm, total width: 691 mm, total length: 1,118 mm, water tank capacity: 40 l, noise level: 60 dB, We offer for sale a Rydwan BD 50/40 RS Bp Battery-Powered Scrubber Dryer. Condition: Very good Year of manufacture: 2019 Operating hours: 174 rbh The machine is in excellent condition both visually and technically. It has undergone a comprehensive, detailed refurbishment, making it fully functional and ready for immediate use. All machines offered by us are presented in genuine photographs — you purchase exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical Specifications: • Power source: Battery-powered • Drive: Traction motor • Working width (brushes): 510 mm Ljdpfxsw Icz Eo Aabohn • Working width / vacuuming: 691 mm • Clean/dirty water tank capacity: 40 / 40 l • Theoretical area coverage: 2,805 m²/h • Practical area coverage: 2,000 m²/h • Battery type: Maintenance-free • Battery voltage/capacity: 36 / 76 V / Ah • Maximum battery run time: 2.5 h • Charger supply: 230 V / 50–60 Hz • Brush rotation speed: 180 rpm • Brush pressure: 20 / 26 g/cm² / kg • Water consumption: 1.5 l/min • Acoustic pressure level: 60 dB(A) • Rated power: max. 1,080 W • Permissible total weight: 330 kg • Dimensions (L x W x H): 1,118 x 691 x 1,316 mm Set includes: - New batteries - New disk brush - New squeegee blades - New protective rubber skirting

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Lhodpfx Aaexliguobjn Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: used, mileage: 7,58,165 km, power: 220 kW (299.12 HP), first registration: 10/2010, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, parking heater, General Engine: Mercedes-Benz Emission standard: EURO 5 Total seats: 39 Seating configuration: 37+1+1 high/fixed Standing capacity: 60 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights * Xenon headlights Passenger compartment * Auxiliary heater * Double glazing * Driver's microphone * Pram/stroller space * Wheelchair ramp * Wheelchair space * Stop request button Audio, communication, electronics * Radio Exterior * LED destination display (Matrix/Topform) * Double-width doors: 2 * Raising/lowering system * Power steering * Analog tachograph disk * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Miscellaneous * German vehicle registration document Lhjdpfx Ajxlwkzjabsn * Twin tires * Vehicle length: 11.95 m * Vehicle width: 2.55 m * Vehicle height: 3.40 m * Hub caps * Front axle tires approx. 60% * Rear axle tires approx. 60% our internal vehicle number: 11821 Errors excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,939 h, control type: CNC control, laser source manufacturer: TRUMPF, laser source model: TruDisk 4001, laser hours: 1,939 h, laser power: 4,000 W, TruLaser Cell 7020, Y1500 (L31) • X = 2000 mm, Y = 1500 mm, Z = 750 mm, B = 135°, C = n × 360° • 30 m LLK (laser light cable) • Automatic detection of focusing optics • Magnetic separation of the optic in case of collision • FocusLine • Siemens 840D control • Console and software for program teaching • Mains connection • Remote diagnostics • Documentation TruDisk 4001, 1 unit • P = 4000 watts Ledpfxjxn Di Ne Aabohn • Beam quality = 4 mm·mrad • Laser power control Optical output for laser light Beam splitter Core Switch Water-air chiller • For TruDisk 4001 Workpiece processing WeldLine Comfort – CutLine Professional, 1 unit • Prepared for laser cutting and welding • Laser technology tables for cutting and welding • 2-in-1 laser light cable • ControlLine DepositionLine integration Metal bellows protection FlowWatch sensor • Sensor for monitoring powder feed rate DepositionLine – Powder supply Disc feeder Additional powder container 1.5 l Fill level sensor for each container Additional cleaning and extraction unit Additional dosing disc Teleservice for powder supply Nozzles Nozzle module with three jets SO16 Additional nozzle cap SO16 Adjustment device for nozzles Dynamic cutting optic f = 150 Adjustment device for cutting optic Motorized welding optic DepositionLine Camera for process monitoring FastLine Cell Wireless touch display teach panel Workpiece holding and additional axes Rotary table D = 3250 mm Connection for compressed air Metal scrap conveyor Connection for workpiece clamping Valve connection for workpiece clamping Load status indicator Extraction for rotary table Compact dust extraction system 4000 Nm³/h CO₂ fire extinguishing system 4000 Nm³/h Protective enclosure for rotary table Status lamp Additional side laser protection screen Interlocked doors Remote diagnostics for 1 year TruTops Cell license Laser Welding 3D module – 1st license Laser Metal Deposition module – 1st license

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers Lhedpfx Aajf E Idlobjn =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: used, Tru Mark TruLaser Cell 8031; Including Laser TruDisk 3001 (6c); Riedl cooling system RL170 TR.03; Herding COMP 1500-141/15/9 SB filtration system; KabelSchlepp WBC 063.00L conveyor Lhedpow U N T Iofx Aaben

Condition: used, mileage: 59,670 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2023, emission class: euro6, color: white, suspension: steel, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, AI1 rear axle control code, ring gear 215, L65 ceiling light(s) in load/driver's cab area with door contact, RS3 steel wheels 6.5 J x 16, Z1N N1 registration, XO9 Mercedes-Benz MobiloVan with DSB and GgD, VC4 lashing rails on side wall at roof frame, L71 cargo area lighting with motion detector, XG7 without increase/reduction 3,500 kg, IR6 wheelbase 4,325 mm, overhang 1,615 mm, T75 grab handles for driver and passenger entry, T77 grab handle at sliding door in partition wall, E1B storage tray for smartphones incl. wireless charging, W54 rear doors, double-winged, opening up to side wall, E1E digital extra: hard disk navigation, HH9 TEMPMATIC semi-automatic air conditioning, E1D digital radio (DAB), Y10 first aid kit, MJ8 ECO start-stop function, ES0 jump-start contact, D03 high roof, ES5 instrument panel charging package, FU5 exterior mirrors without turn indicators, MS1 cruise control, T85 boarding handle on rear left corner post, HI1 climate zone 1 (cold/comfort), T86 boarding handle on rear right corner post, RM0 all-season tires, V43 wooden floor, V42 lashing rails on side wall at waist rail, C6L multifunction steering wheel, LA2 automatic headlamp control, ZM0 panel van, IT4 3.5-tonner, J55 seatbelt warning for passenger seat, H16 seat heating for driver, J58 seatbelt warning for driver seat, H15 seat heating for passenger, MT6 emission class Euro 6d N1, L13 fog lights with cornering light, XZ0 model generation 0, V52 loadable wheel arch, W73 rear door step, VV2 load-securing rail system, ED4 fleece battery 12 V 92 Ah, FF5 storage above windscreen, FF4 storage compartment above roof lining, ED8 electrical pre-equipment, parameterizable special module, T16 partition. You can reach us by phone Monday to Friday until 8pm and Saturday until 4pm! Further information: Leasing/financing and trade-in possible! Subject to prior sale and errors! All information without guarantee ... more on our homepage. Lodpfx Aaoxcfy Eebehn

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Ljdpfxjxlfwpj Aabshn Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Lhodoufcnqjpfx Aabon Main cutting edges up to 25° Motor 1, 1 kW

Condition: new, Year of construction: 2025, machine/vehicle number: N2761135210252, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: ONE, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - 117 tools in the system - latest machine generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Lhsdpfx Aasxqlp Nobjn Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Work area door, automatic, for manual and automtic loading/ unloading Machine control Siemens ONE with GROB4Pilot GROB- NET4Industry starter package Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16.000 min-1, 159/206 Nm, 25/32 kW, oil- air lubrication Double disk-type tool magazine HSK-A 63 with a total of 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette 400 x 400 mm, grid holes, without pallet changer hook Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (11 kW) Compressed air feed through spindle center Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z- Axis) Preparations for use of a machine accuracy package Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology Lhjdsf E Idzspfx Aabon - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: used, mileage: 70,000 km, power: 310 kW (421.48 HP), first registration: 03/2015, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x4, maximum load weight: 14,000 kg, empty load weight: 12,000 kg, wheelbase: 3,600 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, Mtl. house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, auxiliary heating, ABS (anti-lock braking system), traction control (ASR), retarder, auxiliary drive, raised exhaust, differential lock, fog lights, leaf suspension, side aluminum driving protection, roof hatch, environmental badge green Wheelbase: 3600 mm Body: with used 20 t roller system 8 t front axle, rear axle disk wheel 300 planetary 13.4 t, electronic brake system with ABS and ASR, ABS can be switched off, disc brakes with full protection on front and rear axle, secondary water retarder, condensation water monitoring for compressed air system, front axle stabilizer, retarder heat recovery, auxiliary hot water heater, construction site filter, additional thermal insulation, PSM, reversing alarm, CompactSpace, comfort locking system, off-road driving program, Mercedes PowerShuft 3, daytime running lights, protective plate under bumper, transmission oil cooling, tank capacity: 290l, power take-off MB 131-2c pump, rear engine output b flange 120mm 900Nm. Also available with new Hyva 20-49 unwinding system on request for EUR 9,000 surcharge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhodpfxjvhi S Hs Aaben - .

Condition: used, Year of construction: 2007, Used machine Year of construction 2007 Nesting machine with grid table Table working area 5000 x 1240 mm Lsdpfxjwka Ipo Aabohn X-axis travel 5665 mm Travel distance y-axis 1650 mm Z-axis travel 325 mm max. machining height 135 mm with milling unit 7933 Motor 11 KW (S6) HSK 63, water-cooled with C-axis with disk tool changer 18-fold with vacuum pump 250 m³ with manual control unit with central lubrication with minimum quantity lubrication device Availability: short term Location: Röllbach

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Ledpjxiv Ugofx Aabjhn Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), Year of construction: 2013, Control: SIEMENS Sinumerik 840D sl Working Area Max. workpiece height: 200 mm Max. workpiece diameter: 250 mm Max. turning diameter: 390 mm Max. distance spindle stop – turret: 580 mm Min. distance spindle stop – turret: 240 mm Spindles Max. spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Max. spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis Travel X-axis travel (in working area with cover closed): 365 mm Total X-axis travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Z-axis travel: 250 mm Lhjdpfxjw Hx Aks Aabon 12-position disk turret VDI 40

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: N2758355210385, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: Siemens, controller model: ONE, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 126, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - 126 tools in the system - latest machine generation _____ Basic machine G550 AB generation 2 Travel path X-axis 800 mm Travel path Y'-axis 1020 mm Travel path Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Basic machine G550 AB generation 2 Travel path X-axis 800 mm Travel path Y'-axis 1020 mm Travel path Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door with anti-trap protection, automatic, for manual and automatic loading/unloading Lhedpsxqlmbofx Aabjn Decentralized work area mist collector SIEMENS ONE with GROB4Pilot Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW oil-air lubrication Double disk-type tool magazine HSK-A 63 for extra-long tools with 126 pockets in total Tool cleaning device Electromechanical tool breakage detection device Tool lift Palette 630 x 630 mm, grid holes, without pallet changer hook Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Preparations for use of a machine accuracy package Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2025, shaft length: 1,064 mm, laser power: 20 W, door opening width: 480 mm, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) Ledpfsf E Ifbsx Aabehn - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Lhedek S D N Ejpfx Aabsn Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology Ledpfx Aaofz D Hijbohn - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: refurbished (used), load capacity: 1,000 kg, 3-axis welding turntable 1000 kg load capacity (with hydraulic height adjustment) completely overhauled with hand and foot remote control Infinitely variable Diameter of the disk 1000mm Horizontal height min. 0.75m Horizontal height max. 1.4m Height tilted to center min. 0.6m Height tilted to center max. 1.25m Length 2.2m Width 1.0m Ledpjrxcchefx Aabehn

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment Lsdpfjg H Tn Iex Aabshn =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: excellent (used), Welding rotary table 10 tons capacity Condition perfect without defects, extremely robust, indestructible, simple technology can be easily maintained. speed stepless adjustable from 0,01 to 1,0 rpm and speed display Ledpfx Ajh Dm Steabjhn with double foot remote control and additional hand remote control Diameter of the clamping disk 1800mm Height tilted to center of platen 1650mm Height horizontal 1850mm length 3300mm width 1700mm feet can be shortened on request

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-axis rotary and turning positioner 500, 1000, 2000, 3000 kg load capacity, clamping disk diameter 0.5 0.65, 0.8 1.0 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. For welding, assembly, machining, etc. With their stable and robust design, flexible positioning over three axes, even overhead, and easy operation, they make welding easier. easy to operate, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Lhsdpfxoulaxbs Aabon Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate Improved safety, dangerous crane handling is greatly reduced Simultaneous positioning of up to three axes without time-consuming reclamping Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable infinitely variable 0.1 to 1.0 rpm, from 2000 kg load capacity 0.05 to 0.6 rpm. with radio remote control Rotation range 360° endless Swivel range 360° endless Stroke: 1000 - 1500mm, from 2 tons load capacity 1250 - 2000mm Arm radius up to 1000 kg 1 meter, from 2000 kg 1.5 meters

Condition: excellent (used), load capacity: 750 kg, Welding turntable Kistler 750 kg load capacity Speed infinitely variable from 0.01 to 2 rpm Tilt angle 0 to approx. 135° with through hole Diameter of the clamping disk 0.8m Horizontal height 1.0m Height tilted to center 0.8m Length 1.3m Width 1.1m Lodpfjrxcdxex Aabehn with hand and double foot remote control we have used chucks in all sizes in stock

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 dimensions: Lhjdpfx Aaomk T Rbjben height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.