Used Saw And Drill for sale (15,598)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Ppsdpfsfv Hphex Akror Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Station 1: Cutting components to length Station 2: End face drilling at grid dimensions 27, 32, or 60 mm, to a depth of 95 mm Ppedpsy Hv Uqofx Akrjr Station 3: End face drilling with an additional bore or cleaning out the bores from Station 1 Station 4: Deflection testing

Condition: good (used), Station 1: Cutting components to length Station 2: Face-drilling in standard grid dimensions of 27, 32, or 60 mm, to a depth of 95 mm Ppsdpfx Asy Hv Nuekrer Station 3: Face-drilling an additional hole or blowing out the drillings from station 1 Station 4: Checking for deflection

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed Pjdomftiwepfx Akrspr ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: used, Year of construction: 2002, functionality: fully functional, Detailed description to follow Pedpey D N Rgjfx Akrepr

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Psdpfx Akjw Hf T Nsrspr

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Ppedpfxsyak Anj Akror Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: used, Year of construction: 2010, Used machine from 2010, operational, requires inspection and maintenance. Pjdpsywhcnsfx Akrjpr

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Psdjkqz H Dspfx Akrepr

Condition: used, Year of construction: 2022, operating hours: 220 h, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 100 A, We are offering this used Voortman V631 & VB1050 automated drilling and sawing line, year of manufacture 2022, with only 220 operating hours. This offer is based on the following system configuration: Sawing and drilling line VB1050 & V631M (system 20210262), consisting of: 4×5 m cross conveyor (infeed) – 16 m roller conveyor (infeed) Sawing unit VB1050 – Drilling unit V631M – Chip conveyor – Underside marking unit – 16 m roller conveyor (outfeed) – 4×5 m cross conveyor (outfeed) Safety devices Ppjdpjyvviyofx Akrer If you have any questions or need more information, please send us a message or give us a call.

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg Psdpjyrmzqefx Akrjpr EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Ppodsq Ii Dljpfx Akrjr Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 60 mm, workpiece height (max.): 15 mm, TECHNICAL DETAILS Max. workpiece width: 60 mm Max. workpiece height: 15 mm Max. workpiece length: 6,000 mm Ppsdpfxeygw Ttj Akrjr Drilling diameter: 16 mm Saw blade diameter: 350 mm Infeed roller length: 10,000 mm Thread cutting: M12 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Required space: approx. 12.0 x 2.0 x 2.3 m Machine weight: approx. 3.2 t EQUIPMENT Saw 4 x top drilling units 4 x bottom drilling units 6 x drilling and threading units 2 x countersinking units

Condition: used, Double-sided drilling and mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Podpjv Tnihofx Akrepr

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm Psdpjhkhumsfx Akrspr -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Pedpfxjd N Rb Dj Akrspr Very good condition. Available immediately.

Condition: not inspected (used), Maximum working length: 1500 mm Tilting capacity of heads: from −10∘ to +45∘ Swivelling capacity of heads: from −10∘ to +90∘ Motor power, machining unit: 2×2.25 kW (3 HP) Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Podpjxz Um Ssfx Akrepr Saw/drill rotational speed: approx. 3000 rpm CONDITION UNKNOWN – NOT TESTED

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Psdpjxvmttefx Akrspr Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Year of construction: 2006, condition: excellent (used), saw Miter with drilling BALESTRIERI TECHNA PLUS 3001 Manufacturer BALESTRIERI Model / machine type TECHNA PLUS 3001 Year of production 2006 Machine category Saw Plow Mobile cutting head with positioning drive through motion units and electronic digital display. Slides consist of tempered guides and recirculating ball racks. • 2 units with an O 400 blade - each unit is driven by a Kw. 3 • The capacity (radial system) of the rolling slide unit • 2 support tables of components supplied with vertical pneumatic clamps • 1 indirect table support • For reading through the electronic digital display • 2 boring units delivered from the head in 5 spindles 32 mm - Kw motors. 1.5 (rpm 5500) - slides for rolling the slide unit • Mechanical reader for vertical and horizontal corrections - boring heads are horizontally or vertically orientated • Cycle start by buttons for two hands (in accordance with safety regulations) and pneumatic pedal controls. • Automatic waste of evacuation • Max cutting height: 145mm • Maximum cutting width: 300mm • Min cutting length: 170mm (with automatic loading / unloading fitted 355mm) • Maximum cutting length: 3100mm Cutting width 300.0 mm Cutting height 145.0 mm Engine power 1.5 kW ----- Length x width x height - × - × - Weight 2300.0 kg Running hours Ppodsd Ifgvjpfx Akrer Hours of connecting to electricity Good technical condition Compliance with CE standards ----- • Weight: 2300kg

Year of construction: 1998, condition: reconditioned (used), coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Description: Pedpfjkmgpvox Akropr beveller saw with drilling for Eugen Mayer coffins Year: 1998

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Pjdpfstnf Iyox Akrspr Please contact us for more information about this machine.

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. Ppjdpsx Ruudsfx Akror 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. Pjdpfox Rut Tjx Akrspr 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW Psdpfxjx N Icle Akrjpr - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Podpfx Asv U Ea Hokrepr VACAM CNC Control. Short piece removal.