Used Doosan Dx 420 Lc for sale (309)

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: FANUC, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 9,870 h, number of slots in tool magazine: 30, VC 430 - worked in 1 shift only. Still precise and well maintained over the years. We need space in december so machine has to go out. Dsdpfjv Acpuox Addjcr

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, DOOSAN PUMA TT1800 SY Dcsdpfx Adjxx Nc Nodjr

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received. Dcodpfx Ajvri I Asddsr

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 4000 mm Measurements depth 5000 mm Measurements height 3800 mm Machine weight 18000 – 20000 kg Main Drive Spindle speed range 6000 Tool taper BT-50 Number of axis 3 Movement X-Axis Movement 2500 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 950 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 18 m/min Dodpsx D Iilefx Addjcr Table Table load 4000 kg This 3-axis DOOSAN MYNX 9500 was manufactured in 2020, featuring a BT-50 spindle taper and a spindle speed of 6,000 rpm. It includes a 40-tool ATC and can handle a table load up to 4,000 kg. The machine dimensions are approximately 5,000 × 4,000 × 3,800 mm. If you are looking to get high quality milling capabilities consider the DOOSAN MYNX 9500 machine we have for tact us for more information. Application Types Milling

Condition: used, Year of construction: 2018, As good as new DOOSAN DNM4500 including tool holders Control: Heidenhain iTNC640 Dodpsxuagqofx Addscr Travel: X-800 mm, Y-450 mm, Z-510 mm max. table load: 600 kg clamping surface: 1000 x 450 mm Spindle speed: max. 12,000 rpm tool holder: BT40 tool magazine: 30 seats chip conveyor: . electric handwheel: Heidenhain

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: Dcodpfxsxxpaus Addsr - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: MV0092-002171, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, table width: 1,500 mm, table length: 670 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, For sale a used CNC milling machine DOOSAN DNM6700 in very good condition. The machine is only 4 years old and still looks and works great. The reason for sale is unifying all the company machines DOOSAN DNM 6700 – Technical Specifications X-axis travel: 1300 mm Y-axis travel: 670 mm Z-axis travel: 625 mm Rapid Traverse Rates Dedpfxoxzgcro Addecr X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Servo Motors X / Y / Z: 3 kW each Table Table size: 1500 × 670 mm Max table load: 1300 kg T-slots: 4 × 125 mm, 18 H8 Spindle Motor (continuous / 10 min): 11 / 18.5 kW Spindle speed: 12,000 rpm Max spindle torque: 118 Nm Taper: ISO 40, 7/24 (BIG-PLUS BT40 in equipment list) Tool Changer Tool magazine type: CAM-type Capacity: 30 tools Tool holder: BIG PLUS BT40 Max tool Ø: 80 mm (125 mm with adjacent pockets empty) Max tool length: 300 mm Max tool weight: 8 kg Tool-to-tool change: 1.3 s Chip-to-chip: 3.9 s Coolant System Tank capacity: 325 L Pump: 0.25 kW, 0.04 MPa, 150 L/min LUBRICATION: Tank capacity: 1.4 L Pump output: 1.67 MPa × 0.15 L/min (60 Hz) Air & Power Requirements Air: 0.54 MPa × 250 NL/min Power: 3-phase, AC 220 V, 60 Hz, 42.55 kVA DIMENSIONS: Footprint: 2597 × 3350 mm Height: 3100 mm Weight: 8500 kg CONTROL: -FANUC STANDARD EQUIPMENT: Hydraulic unit Cooling system Work light Door interlock Leveling pads Operator 3-color signal lamp Screw-type chip evacuation system Parameter manual & operation manual Chip conveyor + coolant tank & chip tray (from expanded equipment list) EXTRA OPTIONS: 15" screen Preparation for 4th axis Through-spindle coolant 20 bar (3.7 kW, 2.0 MPa) Spindle head cooling system Oil skimmer Absolute position encoder Spindle 12,000 rpm CAM-type 30-tool magazine

Condition: used, Siemens 828D control 8 “ Maximum turning diameter: 481 mm Maximum turning length: 545 mm Maximum main spindle speed: 4500 rpm Main spindle motor power: 25 kW Number of tool positions: 12 pcs X-axis travel: 260 mm Dodsx D Uxtepfx Addjcr Z-axis travel: 590 mm Machine length: 3415 mm Machine width: 1900 mm Machine height: 1845 mm Machine weight: 6500 kg Team Eye (possibly camera or inspection module) LNS chip conveyor Tool holder package

Condition: excellent (used), Year of construction: 1998, CNC Lathe Puma 350, year 1998, Fanuc OT control Max. turning diameter: 770 mm X-axis: 357 mm Z-axis: 1,050 mm Spindle bore: 132 mm Spindle speed: 2,000 rpm Specifications Dimensions / Options Length: 4,000 mm Width: 2,340 mm Height: 2,292 mm Weight: 8,000 kg Dcjdox Dthmepfx Addor Hydraulic power chuck: 315 mm Tool setter Tailstock Chip conveyor Excellent condition

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Dcsdpfx Aex D Il Heddjr Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, Dcodpeq T Rt Defx Addsr spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 1705 mm Measurements depth 3118 mm Measurements height 1730 mm Machine weight 4800 kg Control Unit Dcodpfx Adox D Tcqodjr Model FANUC 18iTB (Manual Guide i) Main Drive Spindle speed range 5000 rpm Spindle motor power 3.7 kW Number of axis 5 Workpiece Workpiece drm over bed 600 mm Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment LNS Quick Load Servo Bar Feeder This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, Dcodpfx Aownfzcedder 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets Dodox D Nkqopfx Addocr This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, Dcjdpfxjwq Inqe Addor swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit. Dsdoxv Svmspfx Addecr

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Dsdpfx Adjxwytcodscr Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, Dcjdpfsw Npz Ijx Addjr 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, Dcodpfxewq Iwxj Addor B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2007, 770mm Swing, Djdpfsxv Tf Nox Addjcr 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, Dsdpfx Ajwwtrbsddjcr FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Djdpfxexm Sxvj Addscr Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Dcodpfxoxwytvo Addsr Fanuc i series control, Through spindle coolant,4th axis Table

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, Dcodpoxv Udgefx Addsr 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, Dsdow I Tnijpfx Addjcr milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant