DOOSAN NHP6300

DOOSAN NHP6300

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, Tjdpfoylbpvjx Abtob 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm Tedpfxjvwgl Nj Abtob ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,679 h, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of Manufacture 2018 / Commissioned 2019) You are welcome to inspect the machine in our factory while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK VTC-820/30 is a powerful CNC vertical machining center for the precise and efficient machining of large workpieces. With generous travels of 3,000 mm in the X-axis, 820 mm in the Y-axis, and 720 mm in the Z-axis, the machine is particularly suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The sturdy work table, with dimensions of approximately 3,500 × 820 mm, allows for the accommodation of large workpieces. The powerful main spindle, with speeds of up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The CAT 40 (ISO 40) spindle mount ensures broad tool compatibility. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, rapid programming, and high process reliability. The 48-tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center features coolant supply through the spindle, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability in industrial manufacturing. You can rely on us – professional, reliable, and with a passion for machines! Todey S Db Aepfx Abtsb PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Tjdpfx Aezqzm Dobtjb Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Todpfx Aozmfxiobtsb Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Tsdpotx Dn Ujfx Abteb

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 Tjdeytpbispfx Abtjb - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Tjdpfx Aowl A H Dsbteb Machine weight approx.: 5.8 t

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Todpfozcpkiex Abtjb Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version Tedpfsw T Tcwjx Abtsb 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.