Used Dorin Compressor for sale (3,438)

Year of construction: 2021, condition: good (used), Motor output 7,5 kW Overall size ca. (L x B x H) 1.935 x 6 mm Nkodpfxsxzuxbs Adwet Weight ca. 447 kg Receiver 500 L Max. pressure 13 bar

Year of construction: 1992, condition: good (used), Compressor system consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min 3,000 rpm 45 kW Nsdpfjri I Rrox Adwekt Digital display Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 rpm 45 kW Refrigeration compressed air dryer Manufacturer: MANNESMANN DEMAG Model: AD160AB Year of manufacture: 1993 Oil-water separator Model: ÖWAMAT 6 Compressed air receiver Manufacturer: LOHENNER Model: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Overpressure: 11 bar

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), volume flow: 950 m³/h, pressure: 10 bar, Renner RSDK 7.5 screw compressor Nodeqmmt Tspfx Adwjkt Year of construction: 2005 Liter capacity: 950m3/h Operating pressure: 10 bar Drive power: 7.5 KW Tank capacity: 300 liters

Condition: used, Year of construction: 2012, Screw compressor MARK MSA 15 Max. operating pressure: 10 bar Complete with refrigerant dryer and 500 L compressed air tank Weight: 445 kg Motor: 15 kW Air delivery: 119 m³/h Connection: 400 V, 3-phase Nkedsycfxvepfx Adwjt

Condition: good (used), Year of construction: 2015, functionality: fully functional, CompAir L45RS-13A Screw Compressor (45 kW / 13 bar) + ALMiG Screw Compressor (Year 2020) – Package or Individual Sale Manufacturer: CompAir / ALMiG Offer: Two compressors from ongoing operation are for sale. Purchase as a package or individually possible. Both units are operational and in very good condition. 1) CompAir Compressor (Gardner Denver) Model: L45RS-13A (Version V2) Year of manufacture: 07/2015 Motor power: 45 kW Flow rate: 8.02 m³/min Operating pressure: 13 bar(g) Voltage: 400 V / 3~ / 50 Hz Medium: Air Operating hours: approx. 46,9xx h (as per display) Nkjdpfjycl H Tsx Adwjt 2) ALMiG Compressor Manufacturer: ALMiG Year of manufacture: 2020 Model/type: on request (nameplate data to follow) Condition: operational / very good condition Sale / Delivery Sale: Package price for both compressors or individual sales possible Location: by arrangement Inspection/test run: possible Delivery: Ex works (EXW), loading by arrangement Price: Unit price (package) negotiable – individual prices on request.

Condition: excellent (used), Year of construction: 2017, operating hours: 12,418 h, functionality: fully functional, Premium screw compressor Atlas Copco GA18VSD+FF, 18.5 kW with 13 bar and 3.75 m3/min. Integrated dryer and frequency converter. Nsdpfx Aoyba U Aodwskt

Condition: excellent (used), Year of construction: 1997, For sale: robust, industrial piston compressor from the renowned German brand Josef Mehrer, model A3V. • Year of manufacture: 1997 • Motor: EMI Belgium 4.0 kW / 400 V • Piston system: 2 cylinders in V configuration • Final pressure: up to 10 bar • Solid cast iron construction • Oil lubrication with sight glass • Three-phase connection – ready for operation Visual and technical condition is very good. The machine is fully functional and ready for further use. Ideal for workshop, industrial or production applications. Classic European build quality – still made of steel, not plastic. Nedpfx Aoud Shqjdwskt

Year of construction: 2007, condition: used, Screw Compressor Work pressure 10 Bar Power 15 kW Output 2,2 m3/min Noise level at 1 meter 61 DB(A) Working voltage 3x 400 V Frequency 50 Hz Dimensions (LxWxH) 1300 x 780 x 1555 mm Nodpjyddkgefx Adwekt Weight 470 kg Including compressed air dryer Berko BFN 186 (2007) Dimensions (LxWxH) 535 x 515 x 865 mm Weight 46 kg Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Max pressure: 13 bar Power: 75 kW – 100 HP Output per min: approx. 12,500 l Nksdpexvcdnefx Adwot

Condition: excellent (used), Year of construction: 2012, operating hours: 32,278 h, functionality: fully functional, Screw compressor Atlas Copco GA55VSDFF. 55 kW with 13 bar and 10.51 m³/min. Integrated dryer and frequency converter. Nkodeya Dp Ispfx Adwjt

Condition: excellent (used), Year of construction: 2014, operating hours: 90,387 h, functionality: fully functional, Screw compressor GA75VSD, 75 kW with 13 bar and 15.09 m3/min. Integrated frequency converter. General overhaul at approx. 68,000 operating hours. New compressor stage. New inverter (NEOS). Nkjdsya Dpuepfx Adwet

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer Nkedpfxswz Ry Dj Adwjt from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Njdpfx Adjxy S H Tswjkt Air consumption / m³/h

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Nkedpfeychbaex Adwet Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Nedpfx Aoycg Ufsdwjkt Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Nkedpfsycg Tnex Adwjt Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1440 mm Weight: 290 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Nodpfxoycg Rys Adwskt Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Nksdpfx Aeycg I Sodwjt Weight: 250 kg

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Njdpjycf Nusfx Adwskt Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter Set for Oil Change in CORMAK LUFT 400 Screw Compressors A complete set of filters is essential when changing oil in CORMAK LUFT 400 screw compressors. Regular replacement of these filters helps maintain compressor efficiency, prolongs the life of key components, and ensures clean, reliable compressed air. Oil Filter – Keeps Lubricating Oil Clean The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating through the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts and extends the life of the oil separator. Purpose: Remove impurities from lubricating and cooling oil Benefits: Protects bearings and screw elements Nkedjycf Iqepfx Adwet Reduces friction and overheating Extends oil service life Air Filter – First Line of Defense The air filter is the compressor’s first defense against dust and airborne particles. It effectively captures solid particles, dust, and contaminants from the environment before they enter the screw block. Using a clean air filter prevents wear of compressing elements and minimizes the risk of contaminating the oil and compressed air. Purpose: Protect the screw block and the rest of the system from external contaminants Benefits: Increases compressor lifespan Maintains performance Reduces energy consumption Oil Separator Filter – Ensures High-Quality Compressed Air The oil separator filter is a key component of oil-lubricated compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist Benefits: Lower operating costs (reduced oil consumption) No contamination of pneumatic installation Stable pressure maintenance Why Choose Our Filters? Full Compatibility: Filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Filter media with large surface area and precise micron rating. Competitive Price: High quality at a cost-effective price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10 Oil filter is vital for maintaining the cleanliness of the lubricating oil circulating within the system. It removes impurities and metal particles generated through normal wear. Clean oil ensures proper lubrication and cooling of moving parts, as well as extends the service life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduction of friction and overheating, longer oil lifespan. Nedsycf Hmopfx Adwskt Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from external contaminants. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial part of the oil compressor, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic installation, maintenance of stable pressure. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Nkodeycf D Sspfx Adwjt Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect solution. With a power output of 7.5 kW and an impressive actual air delivery of up to 990 l/min, it provides a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting equipment. This 400V-powered model is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 1000 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution ensures stable operation and long service life by providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor data and enhancing flexibility and process control. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 l/min Air delivery at 6 bar: 990 l/min Air delivery at 8 bar: 950 l/min Air delivery at 10 bar: 950 l/min Njdpfx Adoycc Egswjkt Outlet connection (G): 1/2" Dimensions: 900 × 600 × 840 mm Weight: 120 kg

Condition: used, The device is operational. The price includes the freezing tunnel and a compressor unit with coolers. The refrigerant used is Freon 507. Hourly capacity: 1,200 kg of strawberries, 1,400 kg of raspberries, 1,600 kg of black currants. Assistance with disassembly is possible. The tunnel is equipped with UDS. Nkjdpfx Adex Nbwpswot

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Nkjdpjycctqsfx Adwst Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg