Used Double Miter for sale (11,399)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Dwjdpfjq Ii Dljx Adroa Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland Dedpfsw H Rdaex Adrjwa - Year of manufacture: 2015 - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 610 mm, number of blades: 4, extraction connection diameter: 150 mm, number of planer blades: 4, planing height: 190 mm, – German-made – For wet wood TECHNICAL SPECIFICATIONS: – Planing width: 610 mm – Planing height: 190 mm – Motor power: 2 x 5.5 kW – 4-knife cutterheads – Four feed speeds: 6 / 9 / 12 / 18 m/min – Two upper toothed feed rollers – One upper smooth feed roller – Two support rollers in the table – Row of anti-kickback fingers – Extraction port diameter: 150 mm – Machine dimensions (L/W/H): 160 / 140 / 170 cm – Weight: 1500 kg Djdpfjxykn Aox Adrowa

Year of construction: 2015, condition: used, Angle display: digital Dodszqyxlopfx Adrowa Length stop flap measurement display: digital

Year of construction: 2004, condition: used, Angle indicator: Scale Dedpfx Adszqyxrorowa Dimension indicator for cutting flaps: Scale

Condition: good (used), Press force: 200 tons Table: 1500x1000 mm Motor: 45 kW Weight: 18,000 kg Dwsdegvz Hxepfx Adroa Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Djdpfxozrd Rzs Adrowa Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Dwjdezrd Nqepfx Adrja Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: used, Year of construction: 2006, BACCI DOUBLE is a double head CNC machining center with 10 interpolated axes, numerically controlled, equipped with automatic hopper feeder. DOUBLE is designed for joinery operations as: tenoning, finger jointing, boring, mortising, milling, both at the ends of the elements and also between the ends. Dedox Dib Njpfx Adrjwa • Serial number AB 059, • 380 V, 50 Hz, 50 kW, • OSAI control, • Axes o X-axis 2400 mm, o Y-axis 650 mm, o Z-axis 1000 mm, o A-axis 360°, o B-axis 260°, • Machining dimensions: L min. 150 mm, L max. 2400 mm, W max. 250 mm, H max. 100 mm, • Input speed X, Y and Z axes 50 m/min, • Max. tool diameter 200 mm, • 4 tool positions per machining side, • 2 pneumatic clamps, • Spindle taper ER 32, • Spindle information right side: Speed 12000-24000 rpm, Power 7.4 kW, • Spindle information left side Page: Speed 12000-24000 RPM, Power 7.4 kW,

Condition: good (used), Production line consisting of: - BACCI FC 8 Dedpfst Tw S Uex Adrewa - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots Dwedpet Txfpofx Adrja BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. Dwodpfx Aexrpkmedrsa USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: Dsdpfx Adexrzfvorewa a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 04/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Dwedpfozlcnxjx Adrja 1 insulated ventilation flap in the front bulkhead, on the top. Spare wheel 385/65R22.5. Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 04/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Dwodpfx Aozlcm Usdrea Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Dwodpfxsvvkm Io Adrea

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Dsdpozryuvefx Adrowa Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. The operator performs the 45° horizontal cut by pulling one blade at a time. Dwsdey Iag Tspfx Adroa Wide cutting capacity (120 mm width x 80 mm height). Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Professional Double-Sided Planer (Thicknesser) GOODTEK GT-635ARD (Year 2018) For sale, we offer a high-quality, industrial-grade double-sided planer from the renowned Taiwanese manufacturer, Good Tek Machinery Co., Ltd. The GT-635ARD model from 2018 is a powerful and extremely precise machine designed for continuous operation in furniture factories and sawmills. The machine allows for simultaneous planing and thicknessing of wooden components on both sides during a single pass, significantly reducing processing time. 🌟 KEY FEATURES: Spiral cutterheads (top/bottom): Equipped with replaceable carbide inserts (TCT). They provide a perfectly smooth wood surface, longer blade life, and significantly quieter operation compared to traditional straight knives. Electronic digital panel: Allows for quick and precise setting of the planing thickness with an accuracy of hundredths of a millimeter. Smooth feed with frequency converter: Adjustment of the feed speed allows for perfect matching of the working pace to the hardness and characteristics of the material being processed. CE certificate: The machine is fully approved for use in the European market and complies with strict safety standards. ⚙️ TECHNICAL SPECIFICATIONS: Manufacturer: Good Tek Machinery (Taiwan) Model: GT-635ARD Year of manufacture: 2018 Serial number: X6198 Maximum planing width: 635 mm Dwodpfeztptdjx Adroa Maximum planing height: 200 mm Total weight: 2880 kg (very rigid, heavy, cast iron construction that dampens vibrations) Power supply: AC 380 V / 50 Hz / Current: 56 A 🔌 MOTOR SPECIFICATIONS (Total power 38.5 HP / ~28.7 kW): Upper cutterhead motor: 20 HP (~15 kW) Lower cutterhead motor: 15 HP (~11 kW) Feed motor: 3 HP (~2.2 kW) Body/table lifting motor: 0.5 HP (~0.37 kW) 📈 TECHNICAL CONDITION: The machine is in perfect working order, well-maintained, and ready for immediate use in your facility. The electrical and mechanical components operate flawlessly. The central automatic lubrication system for the feed rollers guarantees trouble-free operation for many years.

Year of construction: 2015, condition: used, machine/vehicle number: 192254 / 192260, Footprint: approx. 10x6 m, measuring range: approx. 8x3 m, 2 measuring stands, height: approx. 350 cm, calibrated: 04/2024, various measuring tools, with accessories. Dwjdpozqy R Iefx Adroa

Condition: used, functionality: fully functional, mileage: 37,500 km, power: 100.03 kW (136.00 HP), first registration: 06/2021, fuel type: electric, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, cruise control, hill-start assist, navigation system, power assisted steering, For sale is an Opel Vivaro double-cab / passenger van / transporter (vehicle type according to registration: truck, class/code: N1, group III) with a purely electric drive in very good condition. The vehicle has a van body and offers a total of 6 seats. There are two dents: one on the upper right edge and one in the lower area of the vehicle - see pictures. Vehicle data First registration: 06/30/2021 Mileage: 37,500 km Power: 100 kW (136 hp) Drive: Front-wheel drive Transmission: Direct drive (automatic) Djdpfszktvdex Adrowa Fuel: Electric Body: Box van, double cab Actual range: 175 km Equipment CCS charging port Onboard charger 11 kW (3-phase) Mode-2 charging cable for household socket Air conditioning Cruise control with speed limiter Parking assist, rear (acoustic warning signal) Rain sensor Automatic dipped headlights Electrically adjustable and heated exterior mirrors Hill start assist ESP Plus ABS with brake assist Driver and passenger airbags Side and head airbags, front Multimedia radio with 7" touchscreen Navigation Bluetooth hands-free system Bluetooth audio streaming USB port DAB+ digital radio Opel Connect (emergency call/breakdown call, vehicle status and vehicle information) Sliding door, passenger side Heat protection glazing, strongly tinted at the rear Comfort steering wheel Power steering Tires 16" steel rims with tires 215/65 R16 If you are interested, please contact me. Viewings are possible by appointment. Legal notes & terms of sale Seller: Commercial sale by Fischer Bau GmbH. Pricing: The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty & liability for defects: For companies / entrepreneurs (B2B): The sale takes place with the complete exclusion of any warranty, guarantee and liability for defects. Condition & inspection: The vehicle is handed over in the condition "as inspected and tested". An inspection and a test drive/function test are possible after prior arrangement at: Weissenbach 153, 8967 Haus im Ennstal.

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Dwodpfx Adsuggpzerja Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ The machine can be seen in Rugvica, Croatia (nearby Zagreb). Dedoztc Dcepfx Adrjwa

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital Dwedpfxszlgb Ao Adroa – Power supply: 230 V – Power: 3000 W

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. Dwjdpfx Adezkqdrorea CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 12 mm Middle right - 12 mm Rear left - 6 mm Rear right - 6 mm