Used Double Circular Saw Waves for sale (16,807)

Condition: used, Vesto saw with two discs for sale Giedpotqt T Iofx Ah Hjl - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide Gisdstv Rgrepfx Ah Hel * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Gjdpjwn D Izofx Ah Heil Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: excellent (used), Cross-cut saw Cutting height 200mm Cutting width 200mm 2 x 35kW vertical saws Gisdpfx Ahjwhn Ewo Hel 2 x 35kW horizontal saws Feed rate 10-40 m/min.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg Gjdpfx Aegixvwsh Hsil

Condition: ready for operation (used), 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Giodpfx Aheu Tc Tve Hjl Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Giodpfew U Smwsx Ah Hsl Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Heads adjustable at 45/-45° angles Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical and horizontal material clamping

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Giodpfx Ahjdzp Sno Hjl Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Godpfjkfvhkox Ah Hoil Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Gisdpjw Rg Saofx Ah Hjl Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Giedpfx Ahjwbpwhj Hsl Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Giodpfx Ahskfp D Ts Hsl Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: like new (used), Maximum unit spacing: 340 cm Gsdpjvtpqgefx Ah Heil Two motors, each 1.1 kW Cutting angle adjustment: -45 to +45 degrees Saw blade diameter: 300 mm Pneumatic clamps Option to cut with a single blade Control panel Year of manufacture: 2001

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Gedpfjw Nbhmex Ah Hoil Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, cutting length (max.): 6,000 mm, - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E255 control Gsdpfx Aex Aqhzeh Hoil - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg Gijdpfx Ahjx Hhxhe Hel ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Godoufgnzepfx Ah Heil Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles Gjdpfxjramvas Ah Hoil • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Condition: new, Year of construction: 2026, Yanigav Circular Saw SC600E / SC600M • Drive: Electric single-phase motor 3.1kW / Gasoline engine • Saw blade diameter: 60cm / 60cm • Saw blade bore: 30mm • Tooth depth: 28cm / 28cm Gijdpsr D Nkpjfx Ah Hjl • Rotation: 1450 rpm • Weight: 90kg / 100kg Price: €1395 / €1615

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000 x H 220 mm Giodpfx Ahexnc U Rj Hel cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm Gsdpju Nit Rofx Ah Hsil cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm Giedpsx Tpukofx Ah Hsl - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system Gijdpforcm Rusx Ah Hjl - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg Giedpfx Ahevx N Uce Hel – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm Giedjvwczyjpfx Ah Hol - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)