Used Bottom Plate for sale (15,055)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Dwjdpfx Apszv Rc Ssteb Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: used, Year of construction: 1980, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 Dsdpfx Apszzwpcstewb - Top roll diameter [mm]: 300 - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Dwsdpfx Aszv Rcroptsb Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Djdpfxjzzvytj Aptewb Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Dwsdpszzvyysfx Aptob 1 opening L 480 x W 360 mm Weight: approx 5 T

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) Dwodpfjzwgxrox Aptsb • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: good (used), Cast iron bed - Floor Plate Dodpjzzvz Rsfx Aptewb Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical Djdpfxozwxbfo Aptowb T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. Dwsdpfozwuu Uox Aptjb -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 1,400 h, power: 113 kW (153.64 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, inner dimension length: 8,040 mm, inner dimension width: 1,020 mm, inner dimension height: 120 mm, total length: 8,890 mm, total width: 2,005 mm, total height: 2,065 mm, number of chambers: 1, number of shelf rows: 3, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Dwedpfsyvqt Hsx Aptob Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new Dodpfezlpv Asx Aptswb • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 Dedpfx Aezgw D Rjptswb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 Dsdpfx Apow Dnd Sotjwb -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW Dwodpezzwlqefx Aptjb belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Dsdpfjzx S Egox Aptswb Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Djdozzkvcspfx Aptewb Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Dwjdpfxozdqrpo Apteb Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972 Dodpfxjwcqpnj Aptjwb

Condition: like new (used), Year of construction: 2016, machine/vehicle number: DN-KR29, DEMAG KBK overhead crane, dimensions approximately 24 x 6 m Load capacity / lifting capacity: 1 x 500 kg - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 / KBKII-H / KBKII-H-R rails Height of steel structure: 4.52 m (bracing) Top of steel structure (purlin): 4.38 m Bottom of steel structure (purlin): 4.24 m Dedjzv E Dkepfx Aptjwb Bottom of crane track: 3.84 m Bottom of bridge: 3.6 m Hook height: 3.1 m External dimensions of steel structure (space requirement): 24 x 6 m Support spacing: 8.7 + 7.5 + 8.2 m Dimensions of overhead crane track: approximately 25 x 5.3 m The system is delivered complete: KBK rails, rail connectors Carriages, end plates, cable carriers, supports/hangers, etc. + complete steel structure (HEA140/U140) including Abus GM 500 kg chain hoist The crane is disassembled and packed on a pallet. Item location: 75053 Gondelsheim Very good condition - almost new. See photos. Shipping by freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction Dwedpsxabkbsfx Aptob - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Dwedpfx Aozu Ryhoptjb Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA111-Kran152, DEMAG KBK overhead crane, dimensions approx. 18.2 x 3 m Load capacity / lifting capacity 2 x 50 kg per vacuum lifter Technical data of the system: Dwodpfx Apjzv Icvjteb Overhead crane track 2 x 8 x 3 m made of Demag KBK2 rails Height of steel structure 4 m Top of steel structure (purlin) 4 m Bottom of steel structure (purlin) 3.72 m Bottom of crane track 3.35 m Bottom of bridge 3 m Width approx. 3.1 m Lifting height of vacuum lifter approx. 30-220 cm External dimensions of steel structure (space requirement) 18.3 x 3.1 m Support spacing 8.85 m Dimensions of overhead crane track approx. 8 x 3 m System is delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, holders/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) incl. 2 x vacuum pump with 2 x Palamatic vacuum tube lifter 3, capacity 50 kg System is disassembled and packed on a pallet 1 vacuum lifter is available as a spare Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or pick-up only after prior arrangement. Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: like new (used), operating hours: 185 h, functionality: fully functional, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression Dodpfx Apotwmnnotewb - Raised filling area - Flat bottom plate on tracked chassis Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm Djdpfoyh D Nnex Aptjwb roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: MIKA110-Kran152-33?, DEMAG KBK overhead crane, dimensions approx. 8.8 x 3 m Payload / lifting capacity: 1 x 50 kg at the suction lifter Technical data of the system: Overhead crane track 8 x 3 m, made of Demag KBK2 rails Dwsdpfjzv Ib Sex Aptob Height of steel structure: 4 m Top of steel structure (purlin): 4 m Bottom of steel structure (purlin): 3.72 m Bottom of crane running rail: 3.35 m Bottom of bridge: 3 m Width: approx. 3.1 m Lifting height of suction lifter: approx. 30-220 cm External dimensions of steel structure (space requirement): 9.3 x 3.1 m Support spacing: 8.85 m Dimensions of overhead crane track: approx. 8 x 3 m The system will be delivered complete: KBK rails, rail connectors Carriages, end plates, cable carrier, brackets/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) Incl. vacuum pump with Palamatic vacuum tube lifter 3, capacity 50 kg The system is disassembled and packed on a pallet Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock!