Used Wood Chip Crusher for sale (11,416)

Condition: new, Year of construction: 2024, Wood crusher with cyclone filter, eletrical box, etc... The machines has a CE certificate. Bjw7wnlw3f0 Isdsxf Nwyepfx Ahnstl Quantity of cutting tip: 6 pieces Electric motor power: 30Kw Capacity: 800-1200Kg/hour Drive Type: V-Belt Feeder size: 150mmx150mm Located locally in (EU) Hungary

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm Ijdpfx Aozrlu Uohnetl In fully functional condition, ready for immediate use.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers Iedpfxjxmrwfj Ahnetl • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Chip conveyor Width: 500 mm Height: 900 mm Used for wood chip transportation after screen Itedpezi T E Njfx Ahnel

Condition: used, Wood chip feeding hopper Itsdpfx Ahez Apztonol Hop dimensions: 2650 mm* 2400 mm

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Iedjyhlrmjpfx Ahnotl

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Itedpfxjza U Ems Ahnsl

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Itodpoqmi Irofx Ahnjl Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only Iodey Dfd Njpfx Ahnstl with hydraulic feed system maximum thermal output up to 850 kW suitable for dry material

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Isdod Dy S Repfx Ahnetl Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock Iodpswahhvofx Ahnetl We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Itodsyrhd Topfx Ahnjl Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Itodpsyy Uzcefx Ahnjl

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Sale by customer order. Itodpsykmlmefx Ahnsl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Isdpfeznca Hjx Ahnotl Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland Itedpfjyr Dawsx Ahnsl • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Woodchip Heating System The MAWERA biomass boiler with a nominal heat output of 470 kW is ideally suited for industrial and agricultural heating applications with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are hallmarks of this boiler. --- Technical Specifications: • Fuel types: Woodchips, sawdust, planing shavings • Nominal heat output: 470 kW • Combustion system:   ◦ Feed auger for fuel transport   ◦ Combustion chamber with heat-resistant fireclay lining • Control & air supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-based control featuring flue gas and combustion chamber sensors • Boiler design:   ◦ Water-bearing boiler with generously sized heat exchanger surface   ◦ Front and rear firebox doors for easy access and maintenance --- Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) TOP HEATING SYSTEMS – Used heating equipment, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a constantly available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Woodchip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermo ventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Conveyor augers • Automatic fuel extraction systems Itsdpfxomuzq Ee Ahnel • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: We also stock a wide selection of accessories, including circulation pumps, plate heat exchangers, and many other components—from domestic to industrial specifications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment not yet listed online. 📅 Inspection: Viewing is available by appointment at our warehouse. If interested, please contact us—we are happy to assist you in finding the right solution.

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Itjdpfx Aotmtf Rshnol - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Ijdpfszmfq Sex Ahnstl Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Suitable for woodworking and biomass processing industries

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. Iedpfx Asytn Tdjhnjtl The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Iedpek S Dw Esfx Ahnetl Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Iedpfsr R Ewlex Ahnetl Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm Isdpjyx Digofx Ahnjtl

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Isdpfx Aoxc Eitehnstl Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm rotor width 450 mm Itedpfx Ahelx Ndlenel