Used Wood Chip Heating for sale (33,811)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Itodexciidopfx Agtop

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. Isdpfx Ajxwhw Aegtjtp The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. Iedpfx Asttqd Nogtetp It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Itsdjvvmvfepfx Agtjp

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled Iedpfx Agev Ngq Aetjtp complete with boiler, stocker unit, and discharge system

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction: Iodpjmuzq Esfx Agtotp   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Fuel: Wood chips / Pellets Power: 45–150 kW Itsdpfx Aohikbusgtop Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) --- Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets Isdpfewahhvox Agtstp ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: good (used), For sale: Fröling Turbomatic TMC 35 kW – Automatic Biomass Boiler for Wood Chips, Pellets, and Firewood The Fröling Turbomatic TMC 35 kW is a compact, fully automatic biomass boiler – ideal for agricultural operations or small commercial facilities. — Technical specifications: • Output range: 10.5 – 35 kW • Efficiency: very high, thanks to automatic combustion control • Fuels: wood chips, sawdust, pellets (optionally also firewood up to 35 cm with special grate) • Boiler water content: 114 liters • Weight: approx. 600 kg • Power supply: 400 V / 50 Hz, fuse protection 20 A • Operating temperature: up to 95 °C • Minimum return temperature: 55 °C • Operating pressure: up to 3 bar • Control system: Lambdatronic with oxygen sensor for optimal combustion — ⚙️ Additional features: • Multi-pass heat exchanger with automatic turbulators • Large-volume, refractory combustion chamber with insulation Itsdpfx Asw Naqgjgtep • Independent drives for optimal adjustment to fuel type and moisture content • Emergency operation possible with firewood — Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Price: EUR 5,900 net

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system Iedpfx Agjw Rpdretjtp 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: Itodpfxowp Rqfj Agtop • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, mileage: 14,05,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Ijdpfowqwlrsx Agtstp Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems Itjdpfx Aexmrwfsgtjp ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Isdpjtmtf Refx Agtjtp - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Ijdpfx Agod Dy S Retjtp Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: used, Screen for wood chips Iedpfx Asv Ipc Segtetp Suitable for producing cellulose chips. Screen area 5.25 m2 Capacity approx: 100 m3 ready chips per hour

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Iedpfxsixupuo Agtotp Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: used, mileage: 9,75,000 km, Year of construction: 2014, Serial number: YS2R6X2000535xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21248 Specifications: Delivered with new EU inspection 2014 model Approx. 975,000 km Opticruise gearbox Full air suspension Tires (see photos) Itsdpfx Agew Ucivstjp 2-way tipping Euro 6 Length: 860 cm Width: 255 cm Wheelbase: 410 / 135 cm Curb weight: 13,570 kg 6x2 581 hp Tow hitch Toolbox Autoline S90 sand spreaders High-beam auxiliary lights 2 x rotating beacons Minor damage to passenger-side step (see photos) 2 x beds Radio/CD Air conditioning Description:Scania R580 6x2 chip truck with 2-way tipping bed from 2014 for sale.The truck is in daily operation and will be delivered with a fresh EU inspection.A 2012 3-axle chip trailer can be included for an additional cost. Delivery by agreement. Km: 975000 HK: 580 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 13570 Total Weight: 28000 Payload: 14355 Width: 255 Length: 860 Euro: 6 Model: R580 Gearbox: Automatic

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: Itsdpfewakktsx Agtjp 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Itedpeixuq Dofx Agtep Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: Itjdpfxev U Tmno Agtep - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% Iedjixupmspfx Agtstp CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Itsdpjv U Syajfx Agtjp Specifications: - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery   Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2024, condition: new, Sell ​​a new WLO -15 KW, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 12.00 kW maximum heat output: 15.00 kW / approx. 150 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 1460 m3/h Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Itedpfx Aoixul Hegtep Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1400 rpm Air flow: 1460 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications Itedpfoixup Aex Agtjp CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net