Used Drum for sale (3,041)

Condition: good (used), Year of construction: 2014, High-performance drum chipper Maier / Dieffenbacher. Infeed 1200 x 450 mm. Equipped with 8 feed rollers. Drive motor 200 kW. Feed motors 11 kW. Hydraulic lift and damping of the swing arm. Chip size 30 mm. Includes hydraulic unit, spare parts, and additional rotor. Free loading onto truck. Available only for a short time. Ibsdpfx Ajw Smrioabjc

Year of construction: 1976, condition: ready for operation (used), Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018. Ibjdpfx Aonn Aaioabec

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 10 h, working width: 130 mm, A drum mower for Irus Deltrac 2.0 is being offered for sale. Hardly used, immediately ready for operation! Ibedpfx Aew N Ruisabjc

Condition: used, Year of construction: 2016, operating hours: 216 h, * Engine power: 55.4 kW * Weight: 8,500 kg * Operating hours: 216 hours Ibodpjvyx Eyefx Aabsc * Model: CA1500D -----Internal vehicle number: 10613----Subject to errors and prior sale.

Year of construction: 1988, condition: good (used), Abrasive mixing drum Ibodjk E Hi Eepfx Aaboc Diameter: 100 cm

Condition: ready for operation (used), Debarking drum in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Ibodpfx Aajw N Rxbsbjc Possibility to offer extra debarking sections if more are needed.

Condition: like new (used), Year of construction: 2019, MÜLLER Processing MF 150 Mobile Drum Handling up to 150 kg The like-new stainless steel mobile lifting column was designed for transporting and lifting drums in GMP environments. Iodpew S T Dlsfx Aabsbc Drum holder Ø 360 - 560 mm Capacity: 140 Ah Load capacity: 150 kg Lifting height: 30 - 340 cm Manufacturer: Müller Year of manufacture: 2019 Space requirements: 80 x 240 x 195 cm

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 17590 30, BRUKS Kloeckner Wood Chipping Line Industrial line for processing wood into chips. Includes conveyors, a metal detector, a drum chipper, a control system, power supply, and auxiliary components. Manufactured by: BRUKS Kloeckner (Germany). The line was commissioned in 2010 and has not been operated at full capacity. The plant did not run year-round or 24 hours a day due to insufficient raw material supply. Line Composition: Belt Conveyor BK-CF 1000 Metal Detector BK-MS T Deflector Wall (single-sided, 7 m) Drum Chipper BK-DH 400x1000L - 8 WT Motor Unit 250 kW (incl. pulleys, belts, tensioning device) Scraper Conveyor BK-CS 1000 L Electrical Cabinet and Control System Technical Specifications of the Equipment: 1. Belt Conveyor BK-CF 1000 Center Distance: 15,500 mm Cushioned Loading Zone: 7,000 mm Metal-Free Zone: 2,500 mm Width: 1,000 mm Trough Height: 400 mm Steel Thickness: 10 mm Drive: Via chipper 2. Metal Detector BK-MS T Iodjw Ecb Ijpfx Aabebc Tunnel design, continuous automatic monitoring with adjustable settings. Includes electrical control, siren (110 dB), signal lamp, integrated oscillator, amplifier, shutdown relay, external acknowledgment button. Paint: RAL 3027 (Crimson Red). 3. Deflector Wall Length: 7 m. Single-sided. Designed for loading material onto the belt conveyor using a dosing conveyor (supplied by the Customer). 4. Drum Chipper BK-DH 400x1000L - 8 WT Chipping Height: 400 mm Chipping Width: 1000 mm Chip Length: 35–40 mm Number of Knives: 2 Feed Speed: 28 m/min Main Motor Power: 250 kW Capacity: 30 m³/h (solid chips) Rotor Diameter: 1300 mm Rotor Speed: 420 rpm Feed Motors: 2×7.5 kW Operating Voltage: 400 V / 50 Hz Control Voltage: 230 V Drive Pulley: For 1500 rpm motor Hydraulics: Shaft lift, cover, pressure adjustment — with hand pump, cylinders, and accumulator 5. Motor Unit 250 kW Consists of adjustable rails, V-belt pulley, V-belt set, protective cover. Main Motor: 250 kW, 400 V, 50 Hz, 1500 rpm, IP54. 6. Scraper Conveyor BK-CS 1000 L Overall Length: 18,450 mm Width: 1000 mm Height: 585 mm Discharge Speed: 25 m/min Belt Limit Load: 14.7 t Drive Power: 7.5 kW Construction: Closed galvanized, with stiffeners, low noise level, flap gate at the drive station 7. Electrical Cabinet and Control System Switching: 250 kW motor start — star/delta; 2×7.5 kW feed motors — direct start with indicator lights; 4 kW pump — direct start, with oil level monitoring; rotor cover protection — category 3; local switches and control sensors for the scraper conveyor.

Condition: new, Year of construction: 2025, functionality: fully functional, Key Features Reinforced construction – A rigid, heavy frame minimizes vibrations and ensures stability even under intensive use. Accurate sanding thickness adjustment – A mechanical height gauge allows precise setting of the desired processing depth. Precisely balanced sanding drum – Made of drawn aluminum, it ensures even contact with the material and effective cooling during operation. Versatile application – Suitable for removing old paint, lacquer, rust, as well as for smoothing and deburring. Durable metal drive coupling – Reliable torque transfer from the motor to the sanding drum. Working width up to 920 mm – Ability to sand wide panels in two passes. Construction and Technology The Cormak MM3146 stands out with its robust, industrial-grade design. The main motor, rated at 1.5 / 2.2 kW (S1/S6), combined with a reinforced 60 W feed motor, provides ample power for demanding and continuous operations. The variable-speed feed system (0–4 m/min) allows for adjustment to material type and desired finish quality. The sanding belt (2100 × 75 mm) is driven by a high-speed drum (2800 rpm), allowing for quick and effective material removal. The sanding drum is self-cooling during operation, eliminating overheating issues. A reinforced side guide enhances parallelism and stability across the entire working width. Precision and Efficiency The Cormak MM3146 drum belt sander ensures consistent results thanks to its mechanical height adjustment system with a precision scale. It supports a minimum workpiece thickness of 3.5 mm and a maximum working height of 100 mm, allowing both thin boards and thick construction components to be processed. A working width of 460 mm in a single pass (or 920 mm with dual-feed operation) provides flexibility for both small and large batch production. Applications The Cormak MM3146 through-feed sander is suitable for use in: Joinery and furniture manufacturing workshops Wood restoration studios Metalworking shops for deburring Production of plastic components Surface finishing lines for flat materials Standard Equipment Precision aluminum sanding drum Iodpfxjw Hb D Ds Aabjbc Metal drum drive coupling Worktable: 460 × 465 mm Conveyor belt: 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Ø62 mm dust extraction port Optional Accessories Dust extraction system with chip separator Sets of sanding belts in various grits Infeed roller table Mobile base with brake Choose performance and professional surface finishing. The Cormak MM3146 400V drum sander is a reliable partner for both batch and one-off production – choose quality that delivers efficiency. Technical Specifications Parameter Value Motor Power S1/S6 1.5 / 2.2 kW, 400V Belt Speed 2800 rpm (for wood and metal) Sanding Belt Size 2100 × 75 mm Feed Belt Size 1120 × 450 mm Worktable Dimensions 460 × 465 mm Dust Port Diameter Ø62 mm Feed Speed 0–4 m/min Min. Material Thickness 3.5 mm Max. Working Height 100 mm Working Width 460 (920) mm Feed Motor Power 60 W Machine Dimensions 880 × 540 × 1230 mm Net/Gross Weight 134 / 160 kg

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from 2012 with only 5,598 operating hours! ----* Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Read operating hours: approx. 5,998 * Operating weight: 13,100 kg * A/C - air conditioning * German machine * 119 kW * Deutz diesel engine * More photos and video available upon request * Price: €48,900 net + 19% VAT. ----For further questions please call: For more information please call: Iedpfsw Sk Sysx Aabjbc Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details without guarantee or warranty. Subject to errors and prior sale.

Condition: ready for operation (used), Pneumatic Pump, Drum Pump, Tank Pump Lutz MD2XL, Used Equipment Manufacturer: Lutz Model: MD2XL Ibodpfx Ajvl Hxfsabsc Drive Type: Pneumatic Suction Tube Length: 1170 mm Flow Rate: 1.5 m³/min Operating Pressure: 6 bar Power: 1000 W EX: Explosion-proof Lutz drum pumps and tank pumps are suitable for the safe and economical transfer and decanting of neutral, aggressive, non-flammable, and flammable, low-viscosity, or slightly viscous liquids. They are designed for use with clean or contaminated liquids in various sizes of mobile or stationary containers. No lubricant is used, ensuring the pumped liquid remains free of lubricant contamination High-resistance, high-quality carbon fiber shaft bearing Maintenance possible without special tools Seal-free (DL) pump modules are interchangeable Approved under the 2014/34/EU ATEX Directive, Category 1/2

Condition: used, color: other, first registration: 08/2004, Year of construction: 2004, Serial number: UNKNOWN Iedpfx Ajw Tkrcjabobc We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: excellent (used), Year of construction: 2008, PADOVAN TAYLO LUX 10 ROTARY PRECOAT VACUUM DRUM FILTER ROTARY VACUUM FILTER FOR WINE LEES, GRAPE JUICE AND CARBOHYDRATES – TAYLO DRUM AREA - 10,5 Sq. m. Vacuum filtration on kieselguhr prepanel or perlite. Processing steps: - Pre-panel formation; - Filtration and drainage; - Cutting and draining the panel; - Extraction of the filtrate; - Filtration of residual liquid and filter washing at the end of filtration. EXCELLENT CONDITION. LOCATION - POLAND. Ibjdpfsv Ivm Dox Aabec

Condition: used, fuel tank capacity: 340 l, Year of construction: 2007, operating hours: 7,340 h, Year of manufacture: 2007 Empty weight: 19.000 kg Ijdpfx Ajttzpieabobc Dimensions (LxBxH): 634 x 230 x 302 cm

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Isdpfjmza S Ejx Aabsbc Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: used, axle configuration: 3 axles, loading space length: 13,370 mm, loading space width: 2,500 mm, loading space height: 2,690 mm, first registration: 06/2004, color: white, tire size: 385/65R22.5, Year of construction: 2004, Equipment: ABS, Axle configuration Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 50%; Reduction: single reduction Rear axle 2: Tyre tread: 40%; Reduction: single reduction Rear axle 3: Tyre tread: 70%; Reduction: single reduction Iedpow Rx Nqsfx Aabebc Dimensions Dimensions (L x W x H): 1401 x 260 x 400 cm Weights Unladen weight: 8,670 kg Payload: 32,330 kg Gross vehicle weight (GVW): 41,000 kg Functional Body manufacturer: OTHER Condition Damage: none

Condition: used, Year of construction: 2014, operating hours: 395 h, Tandem vibrating roller, vibration front and rear, engine power 22.5, lighting, rollover bar, drum width 1000 mm, vehicle may have advertising stickers and/or lettering Iedpfxswpzh Ij Aabobc Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this object. Please contact us!

Condition: used, axle configuration: 2 axles, first registration: 08/2010, color: other, Year of construction: 2010, Empty weight: 3.100 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Isdpow Sxp Tsfx Aabjbc Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Filling station for Big Bags or drums, consisting of: - Feed hopper Iedpfx Ajw Rq Dyoabsbc - Vibratory feeder tray with magnetic drive 550/400x2500 mm, trough height 200 mm, mounted on rubber buffers, with support structure - Frequency control unit, installed in control cabinet with PLC for connection to scale - Dosing floor scale, 1200x1200 mm, 1 kg - 3000 kg, evaluation electronics with tare function New price €39,850 (net), invoice available as proof

Year of construction: 1990, condition: used, Inline Drum filling - / capping machine Pos. number: LTC00005452 Make: Ocme Type: LFT300 Year of build: 1990 Range: 60 litre / 200 litre drum Ijdjh Uca Sepfx Aabobc Frame: steel Dimensions: L x W x H = 6.000 x 2.400 x 3.000 mm Weight: 3.500 Kg Power-supply: 3x380 Volt – 50 Hz – 1,5 kW Features: manual / automatic program filling / capping /seal applicator / screw

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Ibedpfx Ajt Ag Udsaboc

Condition: as good as new (ex-display), Year of construction: 2025, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput Iodpfxow I R Rnj Aabsbc - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, first registration: 01/2004, color: green, tire size: 385/65R22.5, Year of construction: 2004, Axle configuration Tire size: 385/65R22.5 Tire tread: 30% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Ijdpfx Aow N Ecnsabjbc Rear axle 3: Reduction: single reduction Dimensions Dimensions (L x W x H): 1362 x 255 x 400 cm Weights Unladen weight: 7,000 kg Payload: 32,000 kg Gross vehicle weight (GVW): 39,000 kg Functional Body manufacturer: OTHER Condition Damages: none

Condition: used, Year of construction: 2013, operating hours: 7,478 h, Internal vehicle no.: G300302 German vehicle Located at our yard in Kaufungen - Kassel, available immediately For more INFO contact Luis Lucena Bomag Tandem Roller BW 174 AP-4 AM Year of manufacture: 2013 Operating hours: 7,478 EC Declaration of Conformity BOMAG Engine: Kubota 3.8 l with 74 kW Centrifugal spreader by Rauch LED lighting 2 x edge pressing devices Variomatic Air conditioning ECOMODE Vibration individually switchable 2 amplitudes / 2 frequencies Isdpew I It Tofx Aabobc Automatic vibration 4 foldable scrapers ROPS cabin with seat belt and heating Steering with comfort control - 5 steering modes Reversing warning system EMERGENCY STOP SWITCH Split drums Subject to errors and prior sale We are happy to accept your used vehicle as trade-in. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 3.790 kg Axle 1: left 8 mm right 8 mm Iedpfx Aaow N Nz Ijbsbc Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm We have the possibility to stack trailers!