Used Dry Ice for sale (47,063)

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Kfodpfjxgttzjx Aansa Drive power 30 kw A total of four dryers of this model are available.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Kfjdpoxt Hwaefx Aanoa

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Kedpewbqrtefx Aansfa Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Kfsdpoikq Tysfx Aanoa Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,150 mm, total length: 1,120 mm, total height: 2,400 mm, warranty duration: 3 months, empty load weight: 1,360 kg, Used vertical Atlas / Sabroe V316 AFT flake ice machine. Complete with 1 ICME T71B4 - 50 Hz - 0.37 kW - 1380 RPM electric motor and a control panel. The Sabroe V316 AFT produces between 8,000 and 19,000 kilograms of flake ice per 24 hours. The machine can produce different ice thicknesses by adjusting the speed of the rotating drum. Weight: 1,360 kg. Kfedpjv Uba Nofx Aanea Specifications Brand: Sabroe Type: V316 AFT Capacity: 8,000 to 19,000 kg/24h Refrigerant: Ammonia or Freon Dimensions: 1120x1150x2400 mm (LxWxH) Year of manufacture: 2000

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Ksdpfxoxmr Tyo Aansfa

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Kfedpfx Aaoxgq Sbsnoa Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, empty load weight: 8,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,915 mm, suspension: air, tire size: 445/45 R 19.5, color: yellow, mileage: 5,26,675 km, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, double-deck system, double-deck system with beams, disc brakes, BPW axles, EBS, 13 pairs of recessed lashing rings in the floor, 4 pairs of ship securing brackets, axle cap kilometre counter (kilometres reading taken!), clothes rail box integrated at the rear in the floor, side walls inside with keyhole plates, load securing certificate according to EN 12642 Code XL. Kfjdpfxsxyzaie Aanoa

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: SOMOS / Mann + Hummel Kedpfx Aasiq Ng Renjfa mit Fördergerät Typ: T200 MC2 Baujahr: 2014 Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Trockenlufttemperatur: max. 200° C

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser Ksdpforzq Arsx Aansfa machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: used, Gas dryer with steel belt. Device length: 8 meters. Kjdpfx Aajxu U S Ujnefa

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: hybrid, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, onboard computer, CONSTMACH DRYMIX 100 is a fully automatic dry type concrete plant without a mixer. Concrete components are transferred directly into the transit mixer after weighing, without any mixing process. This feature provides a significant advantage, especially in projects where concrete needs to be transported over long distances. DRYMIX 100 offers high efficiency and durability thanks to its fixed, non-mobile structure, and can be used safely in many regions of the world due to its adaptable design for different climatic conditions. Ksdpexp Uzlofx Aanofa This model can be integrated with cement silos with capacities ranging from 50 to 500 tons. When supplied in cement bags, it is easily transferred to silos thanks to the blasting bunker and silo filling systems. In plants used in cold regions, the system is heated with hot steam generators and insulated panels, while in hot climates, concrete temperature is maintained at the ideal level with cooling units. Furthermore, aggregate pre-feeding systems eliminate the need for a feeding ramp, saving space on site. The user-friendly automation system is supported by top-class SIEMENS and SCHNEIDER brand electronic components. The PLC control system manages the production process fully automatically and ensures maximum accuracy with high-precision weighing systems. DryMix-100 Dry Type Concrete Plant Technical Specifications Production Capacity: 100 m³/h Weight: 33 tons (excluding cement silo) Total Motor Power: 70 kW Electric Generator Requirement: 200 kVA Required Operating Area: 700 m² Aggregate Storage Bunker: 4 x 25 m³ Aggregate Weighing Bunker: 3 m³ Aggregate Weighing Belt: 1000 x 11,100 mm Aggregate Transfer Belt: 1000 x 10,800 mm Cement Weighing Bunker: 1,200 kg Water Weighing Bin: 600 liters Additive Weighing Bin: 50 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the DRYMIX 100 Concrete Batch Plant? CONSTMACH DRYMIX 100 is the most suitable solution for long-distance concrete transportation requirements. Its mixerless structure, low maintenance cost, and high production capacity increase operational efficiency. Thanks to its structure that can be adapted to all weather conditions, it offers the same quality whether in the freezing cold of Siberia or the scorching heat of the Middle East. Its advanced automation system ensures maximum accuracy with minimal human intervention. At CONSTMACH, we offer a reliable investment with world-class engineering quality, a fast service network, and spare parts supply. By choosing DRYMIX 100, you can add long-lasting, efficient, and high-performance production power to your projects. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, This listing is for a Clearmark ICE Viper plus Thermal Inkjet Coder with Stainless Steel Conveyor Kfedpfxjxzg Hwo Aansa

Condition: used, VACUUM DRY KILN for massive wood second han machine Kedoxxladjpfx Aansfa volume: 10 m3 diameter: 150 cm n.12 aluminum plates with loading trolley machine overall dimensions: total length: cm.630 width: cm.185 weight: kg.3000

Year of construction: 2013, condition: excellent (used), Type: BF7000 Serial number: 2022 Year of construction: 2013 Capacity: 7000 kg/24h Drum speed: 6.2 RPM Kfedpfx Aasqvnn Densa Refrigerant: TYFOXIT F50 brine Power: 3 x 400V, 50Hz, 2.5kW Dimensions: 2400 x 900 x 1600 mm Weight: 325 kg With UV filter

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional Kfjdpovllxdjfx Aanja

Condition: used, -Range: TRITTICO -Type: 204 Version -Water cooling -Serial No.: 3011049 Kfodpfxsxyh Ruo Aanja -Production per cycle: Max 4 liters (2 to 4 kg of ice cream mix) -Hourly capacity: 20 to 30 -Mix per cycle: 2 to 4 kg -Protection rating: IP 22 -Voltage: 380V -Power: 5 kW Used Professional Ice Cream Machine Trittico 305 BRAVO: Discover the Art of Gourmet Creation The Used Professional Ice Cream Machine Trittico 305 BRAVO is much more than just an ice cream maker. It is a genuine gourmet creation tool, allowing you to produce a wide range of sweet treats, from smooth custards and refreshing sorbets to rich chocolate ganaches. Designed for professionals, this versatile machine meets all your needs in patisserie and frozen dessert making. -Trittico Exécutive Evo is the ultimate multifunctional machine, combining refined expertise and cutting-edge technology in one unit. -The laboratory you always dreamed of, in less than one square meter! Trittico® Exécutive Evo embodies the art of artisanal gelato making, high-end patisserie, international gastronomy, and chocolate work. It is equipped with an electronic control unit that automatically manages many standard programs and allows you to customize them with maximum flexibility, adapting to the specific requirements of every artisan. An indispensable assistant: precise, reliable, tireless, and consistent! FEATURES -The Ionic System® assesses the proper consistency and volume of the ice cream by detecting, via sensors placed in the freezing cylinder, the amount of crystallized water present in the mix. -Dual inverter for the upper tank and multi-speed agitator

Condition: new, functionality: fully functional, power: 40 kW (54.38 HP), fuel type: hybrid, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, onboard computer, CONSTMACH DRYMIX 60 fully automatic dry-type concrete batching plant stands out with its special design that does not include a mixer. Concrete components are transferred directly to the transit mixers via precision weighing systems without any mixing process. This feature provides a significant advantage in projects where concrete needs to be transported long distances from the production area. DRYMIX 60 is an ideal solution for long-term projects, offering both high-performance production capacity and low maintenance requirements. The plant is compatible with cement silos of different sizes, ranging from 50 to 500 tons, depending on the project and site conditions. When bagged cement is used, it is easily loaded into the cement silos thanks to the integrated blasting bunker and silo filling systems. Furthermore, the plant can be equipped with special heating or cooling systems depending on the climatic conditions of the region where it will be installed. In cold regions, the system is equipped with steam generators and insulated panels, while in hot regions, it is supported by equipment that cools the concrete. Aggregate pre-feeding systems eliminate the need for a bucket ramp, facilitating installation. In situations where site space is limited, aggregate transfer can be performed using a bucket system instead of a conveyor. DRYMIX 60 is equipped with high-quality SIEMENS and SCHNEIDER brand electronic components and manages the entire production process safely and efficiently with its user-friendly PLC-based automation system. DryMix-60 Dry Type Concrete Batch Plant Technical Specifications Production Capacity: 60 m³/h Weight: 27 tons (excluding cement silo) Total Motor Power: 55 kW Electric Generator Requirement: 80 kVA Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 15 m³ Kfodpjxp U Sdsfx Aansa Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 600 x 9,700 mm Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 l Additive Weighing Bunker: 30 l Air Compressor: 300 liters, 4 kW Cement Silo: 50–500 ton capacity option Control Type: Fully Automatic Why Choose DRYMIX 60 | Dry Type Concrete Mixing Plant? CONSTMACH DRYMIX 60 is a plant model that stands out in the industry with its efficiency and durability. Its modular design offers easy installation and portability, while the automatic control system ensures maximum precision in the production process. Energy-efficient motors and high-quality equipment guarantee long-term use. If you want to save time, labor, and costs in your projects, the DRYMIX 60, manufactured with the CONSTMACH guarantee, is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, This listing is for a AdvanDx PNA Fish Workstation Dry Bath Incubator The AdvanDx PNA FISH Workstation provides a hybridization incubation platform for PNA FISH applications. Kedpfoxzg E Hex Aansfa The AdvanDx PNA FISH Workstation can hold up to 30 microscope slides.

Condition: excellent (used), Year of construction: 2013, Telme Variofill filling machine Kfodpfx Aev Tnzqoanoa Serial: 3110 2013, Stainless ice cream pot filling machine, for cups and containers, cylinder capacity 15l, 100g to 1000g portions, up to 335 portions per hour, mobile, 1Ph

Condition: good (used), axle configuration: 3 axles, first registration: 04/2014, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 8,940 mm, color: red, Year of construction: 2014, Equipment: tail-lift, Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW EcoPlus Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 7.850 kg Carrying capacity: 33.150 kg GVW: 41.000 kg Functional Tail lift: BAR BC 2000 R2T P5, slider lift, 2000 kg Make of bodywork: Krone Dryliner Kfsdpsxw R Haofx Aanja Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 04/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), input voltage: 400 V, nominal power (apparent): 300 kVA, secondary voltage: 200 V, 300 kVA three-phase transformer (3 x 400 V -> 3 x 200 V) for sale Manufacturer: Trafó-Print Kft. Type: BT23.300k Power: 300 kVA Kfjdpfew Ev N Eex Aansa Primary: 3 x 400 V Secondary: 3 x 200 V

Condition: used, -Dimensions: 800x875x1400mm -Serial No.: 3215621 -Refrigerant Gas: 22R -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorption resistance: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Class: N -Minimum/Maximum water pressure: 200 (2atm) - 400 (4atm) Min.KPa -Voltage: 380V -Power: 5.60 kW Kedsxyh Igopfx Aanofa -Weight: 252kg Used Bravo Trittico 305 Professional Ice Cream Machine: Unleash Your Creative Craft The used Bravo Trittico 305 Professional Ice Cream Machine is much more than a simple ice cream maker. It is a true tool for creative artisans, enabling you to produce a wide range of sweet treats—from smooth custards and refreshing sorbets to rich chocolate ganaches. This versatile machine is engineered to handle all your patisserie and frozen dessert needs. -The Trittico Exécutive Evo is the ultimate multifunctional machine, bringing together high-end craftsmanship and advanced technology. -The workshop you’ve always dreamed of, contained in less than one square meter! The Trittico® Exécutive Evo embodies the art of artisan gelato, fine pastry, international gastronomy, and chocolate-making. It is equipped with an electronic control system that automatically manages numerous standard programs and allows for full customization according to each artisan’s needs. An indispensable collaborator: precise, reliable, tireless, and consistent! FEATURES: -Ionic System® evaluates the texture and volume of ice cream by detecting—the amount of crystallized water in the mixture, thanks to sensors positioned in the freezing cylinder. -Dual inverter for the upper tank and multi-speed agitator -Option to work with the Ionic System®: software-controlled speed guarantees the best results for ice cream and sorbet, as well as optimal mixing for pastry products. -Option to operate with adjustable extraction temperature -Multiple recipes for gelato, chocolate, and pastries Outstanding Versatility

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Kfedpfx Asxzh Shoanea Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: used, This listing is for a Thermolyne 16500 Dri-bath DB16520 Ksdpfxjxzh Nmj Aanjfa