Used Durma Mechanical Shear for sale (226)

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Bedjd Rlk Hopfx Abtowt Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Year of construction: 2024, condition: new, SPECIAL OFFER: Press brake AD-S 1260 Length/Width/Height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons Bending length: 1250 mm Distance between stands: 1050 mm Stroke: 160 mm Installation height: 530 mm Overhang: 450 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Bwedpfxsd R Dhpo Abtet Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of them is split) European lower tool: M.460R.85 (one of them is split) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable support arms at the front with T-slot, strip stop and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball screw system Support arms: 2 pcs Stop fingers: 2 pcs With foot pedal Oil capacity: 100 l Price is valid ex Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: MS 3004 Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap stop in the T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180° The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg, by prior appointment. Bwodpjd R Emfofx Abtot Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Bsdpjd S I R Tjfx Abtowt Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 611600 - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Bwjdpfjvy Sraex Abtst Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid Bsdpfx Abjvwm A Istswt The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Year of construction: 2024, condition: new, Control unit – with NC control Conical bending unit Side roller positioning synchronized electronically via PLC Safety mechanism for welding (welding capability) on the machine Machine body made of stress-relieved, annealed steel 4-roller drive system – upper and lower rollers driven by hydraulic motor via planetary gearbox, synchronized (ᐳ 430 mm) Electrical and hydraulic protection against overloads Lower roller pressure hydraulically adjustable Hydraulic roller brake, prevents the sheet metal from slipping back Hydraulic pivoting of the upper roller bearing for easy removal of the formed sheet metal Safety wire Induction-hardened rollers (HRC 54), manufactured with a slight bulge Variable speed Bending length: 2050 mm Bwjdjdzzyfopfx Abtjt Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Upper roller: 230 mm Lower roller: 210 mm Maximum roller spacing: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg

Year of construction: 2024, condition: new, MRB-S Series Technical Specifications (See Images) Standard Equipment CE compliant Conical bending Motorized back roller Additional control panel for upper and lower rollers operated by the chassis. SAE 1050 steel rollers Induction-hardened rollers, Stress-relieved steel construction, on 2.5 and 3m machines, support system, braking system for precise bending, Digital display. Motorized back roller with tension Optional Equipment Motorized lower roller mounting, ground rollers Extended rollers for profile bending, Special rollers for profile bending, Special packaging for international shipments. MRB Series: Bwodpfx Absfin E Djtot Technical Specifications (See Images) Standard Equipment CE standard Digital display Conical bending Motorized back roller with tension Additional control panel for upper and lower rollers, operated by the chassis. Chassis operated. SAE 1050 steel rollers, Induction-hardened rollers, Stress-relieved steel construction, Braking system for precise bending. Optional Equipment Motorized lower roller with tension, ground rollers Extended rollers for profile bending, special rollers for profile bending, Special packaging for international shipments. Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines to the entire world and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, providing you with competent advice and assistance when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would be happy to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Bwjdpsfirx Nsfx Abtot Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: as good as new (ex-display), Bending force: 2200 KN Bending length: 3050 mm Distance between columns (mm): 2600 mm Stroke length (mm): 265 mm Overhang: 410 mm Installation height: 530 mm Operating speed Y (mm/sec): 10 mm/sec Motor power: 18.5 KW Operating speed X (mm/sec): 500 mm/sec Operating distance R (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm H7s8pkvti Weight: 11500 kg Standard equipment: Y1, Y2, pressure beam – axes (individually controllable) X and R axes CNC controlled. Control unit – ModEva 19T Servo motor for back gauge & linear ball screw system (X-R) (AL) Bwedpfxod R Elcj Abtet CNC controlled crowning European tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional accessories: Bending upper tool H=66.5 (one of them split) Bending lower tool 4V die (one of them split) D-Bend 3D CAD/CAM import & simulation program The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Vsiqjq Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bend allowance: 5 mm Bending capacity: 6 mm Bend allowance: 5 mm Bending length: 2,030 mm Roller diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Bwedpfx Asftdh Isbtot Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Bwedpfxerx Rkus Abtot Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you. Bwjdpfx Aboy H Huhetot

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) Bodpfxefiqa Ro Abtswt CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: used, Year of construction: 2003, Technical details: Bwjdpeybbz Rjfx Abtst round bar steel: 45 mm square edge steel: 45 mm L-beam: 130x130x13 90 mm flat steel: 450x15 mm hole punching press: 80 ton throat: 300 mm stroke: 70 mm work height max.: 1195 mm total power requirement: 11 kW dimensions of the machine ca.: 2000x1800x2100 mm weight of the machine ca.: 2700 kg

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can handle even the most demanding tasks? Then the Durma press brake AD-S 803000 with a pressing force of 3000 tons might be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows for flexible and convenient positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. Furthermore, the press brake is a custom-made design and can be configured according to customer requirements to meet all individual needs. If you are interested in the Durma press brake, we would be happy to provide you with personal advice. Other machines are also available and can be inspected. Please contact us for more information and let us work together to find a customized solution for your needs. Control type: DELEM DA-66T Bedpfx Aboi Da Syjtjwt Protection oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet metal support systems: Movable support arm Stroke: 750 MM Back gauge type: X=1500 X, R Overhang: 1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Lower tool holder: DURMA Wide

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for the production of automotive and other high-precision and complex 3D components. The system offers 25% more processing area than machines with the same concept. For flawless cutting performance, the powerful machine body and rotary table provide the best quality. Thanks to the easy-to-use design, you can save time. Due to components from well-known manufacturers and high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. With this technology, you will have lower energy consumption and can increase your company's profits. The machine is impressive due to its speed, reliability, and design. HD-FA Technical Data Bsdpeg Adknjfx Abtewt Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360° Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm, h= 3700 mm Working area: 9,000 mm x 10,000 mm (Safe area) Distance of rotary table door: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19-inch touch screen Filter Capacity: 2,500 m³/h - 4 kW

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Bedpfx Aog Adu Hebtswt Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2022, Guide-rail guided plate shear VS 3006 with sheet metal holding device DURMA IV – special price* – demonstration machine Operating hours: 0 hours Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 – 2° Back gauge: 1,000 mm, CNC-controlled Bodpfsf U Th Ejx Abtowt Motor power: 11 kW Length: 4,100 mm Width: 2,050 / 3,650 mm Height: 1,950 mm Oil capacity: 125 l Weight: 7,500 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will gladly provide you with further information. *plus transport and installation costs

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Bodpeq Tpkyjfx Abtewt Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: new, Year of construction: 2023, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,050 mm, Technical specifications Cutting capacities: Maximum cutting length: 3100 mm Bedpfxjrt Uv Ej Abtjwt Maximum thickness for mild steel: 10 mm Maximum permissible thickness for stainless steel: 6 mm Overhang: 50 mm Adjustable cutting angle: 1.5 degrees Number of hold-down devices: 16 Hold-down force: 22 tons Adjustable backgauge: up to 1000 mm Speed of the back gauge: 200 mm per second Drive and dimensions: Motor power: 22 kW Oil tank capacity: 200 liters Support arms: 2 pieces Worktable height: 865 mm Worktable width: 580 mm Worktable length: 3515 mm Machine dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm Weight: 9300 kg Total width incl. support arm and safety guard: 3600 mm Equipment features Design with pendulum cut for precise results Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length and number of pieces, including USB connection Motorized backgauge mounted on ball screws with a reach of up to 1000 mm, can be folded up for maximum flexibility Clear control panel on the swivel arm for convenient control Hydraulic hold-down device for optimized cutting results, positioned close to the cutting edge Foot pedal for easy operation Centrally adjustable cutting gap adjustment for different material thicknesses Cutting line lighting for increased precision Large support table with sliding balls for material handling Counter for number of cuts Options for single and series cutting Folding finger guard and side stops for safe working Easily replaceable and resharpenable blades for long-lasting sharpness Adjustable cutting length for efficient processing and minimum material consumption Low-maintenance design with easily accessible oil filling Safety light barriers at the rear of the machine for increased occupational safety Professional customer service Operating instructions in GERMAN and ENGLISH Complies with the current CE safety regulations

Condition: new, Year of construction: 2024, Directly from the manufacturer: Durma SBT 3010 high-performance guillotine shears This machine stands for innovative technology and offers excellent cutting performance that optimizes your production processes. Find out more about the extensive standard equipment and impressive technical data that make the SBT 3010 a must-have for every workshop. Extensive standard equipment: CE certification for the highest safety and quality standards. D-Touch 7 touchscreen control with color display for intuitive operation. Adjustable hydraulic hold-down pressure for optimum material fixation. Precise back gauge with ball screw, adjustable up to 1000 mm. Side stop (L=1500 mm) and two support arms (L=1000 mm) with T-slot and spring-loaded folding stop for optimum material guidance. Table plate with ball rollers for easy handling and protection of the workpiece. Central cutting gap adjustment via handwheel for quick adjustments. Cutting line lighting for precise alignment. High-quality blade set for versatility and durability. Cutting length limiter and piece counter to optimize your production processes. Technical data and performance features: Cutting length: 3100 mm Maximum sheet thickness: 10 mm (mild steel), 6 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes per minute: 13 Cutting angle: 1.5° Bjdpfxjrx R E De Abtswt Number of hold-down devices: 16 Downholder pressure: 22 tons Backgauge: Up to 1000 mm with a speed of 200 mm/s Engine power: 22 kW Oil tank: 200 liters Number of support arms: 2 Table dimensions: Height 865 mm, width 580 mm, length 3515 mm Overall dimensions: Length 4200 mm, width 2250 mm, Total width with support arm and rear protective grid 3600 mm, height 2100 mm Weight: 9300 kg As a manufacturer, we guarantee you a machine that impresses with its performance, precision and reliability. The Durma SBT 3010 is the perfect solution for companies that want to increase their efficiency and productivity in sheet metal processing

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015, 15 kW laser cutting system Technical Details: • Max. sheet size: 12,000 mm x 2,000 mm • Max. sheet weight: 235 kg/m² • Laser power (IPG): 15 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting range: • Steel: 40 mm • Stainless steel: 30 mm • Aluminum (AlMg3): 30 mm Equipment: IPG 15000W fiber laser source (including cooler) Compact dust extraction system (filter) Air conditioning in the control cabinet Flatbed laser with automatic pallet changer Laser cutting monitoring Automatic laser head positioning CE-compliant pallet changer with light curtain safety system Control system: SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 Flatbed laser with pallet changer (automatic pallet changing system) Tube cutting device, side mounting, max. diameter 400 mm Sheet inspection (automatic sheet position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Work area lighting Multi-chamber extraction system Warning light Bwjdpfx Aogyfm Ejbtjt Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, without additional costs

Condition: new, Year of construction: 2024, PB 4 Bending Center With the Durma Bending Center, you will achieve error-free results with maximum speed and safety, fully automatic tool change, and minimal setup time. The Durma Bending Center, with its robust machine body, excellent precision, ergonomic design, and diverse bending functions, will occupy an important place in your operation. The combinations we can technically implement in punching and laser machines enable maximum time savings in your production processes. Our developed smart consumption, standard production independent of the operator, and Durma CNC Bending Center, which is manufactured after stable thermal conditioning, offer you the opportunity to generate profits against rising energy costs. The Durma Bending Center automatically performs simple and complex bending operations on sheet metal materials with a thickness between 0.5 and 4 mm. With its user-friendly, easy-to-operate interface and software that simplifies part programming, this product will be your solution partner. Technical Data: Maximum bending length: 2800 mm Minimum bending length: 350 mm Maximum sheet metal input length: 3050 mm Maximum sheet metal input width: 1524 mm Minimum bendable width: 150 mm Maximum bending height: 254 mm Maximum bending depth: 50 mm Maximum sheet metal rotation radius: 3300 mm Bending force: 500 KN Pressing force: 1000 KN Maximum sheet metal thickness: For Fe 410 N/mm2 material: 3.2 mm For Acc. Inox 600 N/mm2 material: 2.2 mm For Aluminum 260 N/mm2 material: 4 mm Minimum sheet metal thickness: 0.5 mm Maximum bending angle per stroke: ±135° Bjdpfx Aeg Adi Robtjwt Extended Functions: Negative bending capability on the last bend: Standard Automatic tool change option: ATS (Standard) Auxiliary clamping tools: Standard Lower auxiliary bending tools: AHD (Option) Upper auxiliary bending tools: AB (Option) Reversed bending arrangement: AB (Option)

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber laser technology Environmental awareness Synchronous, minimal working area High, precise repeatability High process accuracy Compact design Low noise level Simple and fast installation Upon request, we will send you informational material. Bodpfsg Adn Iex Abtewt