Press brake

DURMA Abkantpresse AD-S 30175

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Lredpfx Aofg E Hpefzow Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Lsdpfjvn S I Dsx Afzorw Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Year of construction: 1992, condition: good (used), Control system conversion 2022 to CYBELEC VisiTouch Pac pressure 200 t folding length 3050 mm column width 2550 mm Lredpfxeim R N Hj Afzew Control system CYBELEC VisiTouch Pac ram stroke 524 mm Machine weight approx. 17.000 kg Equipment: - Control system conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - hydraulic punch clamping - hydraulic die clamping - 4-stage pneumatic die displacement

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Ljdocgmf Repfx Afzsrw Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: used, functionality: fully functional, Year of construction: 2007, Sheet width: 3200 mm Sheet thickness: 3 mm Upper beam opening: 300 mm Lrsdpsxfh S Nofx Afzow Control system: System 5000 Motor power: 4.5 kW Machine weight approx.: 4,400 kg Space requirement approx.: 4300 x 2300 x 1750 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.11.17, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination Lredpfx Afonxh T Rszjw * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 12999, Electroic servo break Ljdpfxoh Eip Is Afzerw - 40t x 1300mm - ESA control (network-compatible) - 4 Axis (Y1, Y2, X, R,) - Save up to 50% Engergie - Highspeed bend 20mm/sec. - Precise bending 0.001mm - No hydraulics = lower service costs

Condition: excellent (used), Year of construction: 2008, Technical Data: Lodpfjwntqxjx Afzorw Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2017, Technical data: Working length: 1270 mm Distance between the columns: 1000 mm Pressing force: 60 to CNC control: CYBELEC ModEva Controlled axes: Y1 / Y2; X; R Number of stop fingers 2 pcs. Stroke: 275 mm Motor power: 7.5 kW Lodpfsvxincex Afzerw Working height: 920 mm Light barrier: FIESSLER CE mark Dimensions (length x width x height): approx. 3250 x 2500 x 2600 mm Weight: approx. 4.5 tons Accessories: 1 set of tools Condition: as good as new, very little used Machine comes from a vocational school

Condition: like new (used), Year of construction: 2001, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Technical features Dimensions Table dimensions: 3500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1200 mmZ axis traverse: 1000 mm Milling head Head type: Universal manual long face (UL40)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7900 x 4670 x 2900 mm Accesories External high pressure through spindle coolantElectronic handwheel: HR-130Guarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features Lrodpeugbq Tjfx Afzjw