Used Durma for sale (194)

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Isdpod Srk Sefx Ab Isa Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 673517306, Used Durma RP9 Punch press. No photos as currently safely stored in workshop behind other equipment. Seen working in September 2024. Decommissioned by osupplier and moved to our unit. We have not been able to set it up as not enough room and planned moved fell through. Ijdpfx Aew Uf Iuob Iea Films of machine working availalbe on request and machine is available to view in decommissioned state.

Condition: new, functionality: fully functional, Year of construction: 2024, control type: CNC control, controller manufacturer: Durma, controller model: DT-5, stroke rate (min.): 14 1/min, sheet thickness (max.): 6 mm, back gauge: 1,020 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, ES3006 in stock Ijdpswtl Awsfx Ab Ija - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 - CNC back gauge: 1000 mm - Cutting length limitation - Easy operation - Retraction - Pneumatic sheet holder

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. AD-R 80400 Bending force: 400 tons bending length: 8050 mm With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration centre gives you the opportunity to get an overview of our machines on site, to be convinced of the quality and precise technology of our products at first hand and to receive the best possible advice that is geared to your company goals. It is our task to be your direct contact person for you, our customer, on site and to offer you services in the areas of training and customer service. Isdpfx Abjfin N So Isa We are now happy to accompany you from Germany - from advice, through the purchase and di

Condition: new, Condition new Pressing force 175 tons bending length 3050 mm axes Y1 / Y2 and X axis Control: Durma Sky 22 rapid traverse Y axis 200 mm/s stroke 265 mm Distance between uprights 2600 mm Overhang in the side stand 450 mm Installation height 530 mm Drive concept servo-hydraulic, up to 72 % power saving Working speed Y-axis 10 mm/s Retracting speed Y-axis 500mm/s Backgauge travel X-axis 650 mm Backgauge speed X-axis 500 mm/s Backgauge speed R-axis 350mm/s backgauge travel R-axis 250 mm Table height 900 mm Table width 104 mm Motor power 15 kW length 4250 mm width 1700 mm height 2890 mm Weight 10900 kg 3 axes (Y1, Y2,X) CNC CONTROL DT-15 - 2D graphic display 15 - Intuitive touch-screen operation (simple drawing of the bending contour with the finger) - Direct programming of the bending angle - User-friendly programming in dialog form - Graphic simulation of the bending process - Automatic calculation of the stretched length for sheet cutting - Graphical product and tool memory Iedpeh H Dnbjfx Ab Ioa - Correction option - Manual, semi-automatic and fully automatic working mode - Tonnage calculation/programming by the CNC - Internal data memory - USB connections for backup and program storage Servo motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC controlled crowning Intermediate pieces for upper die clamping die holder for 60 mm dies Laser protection device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Side and rear guards Equipment according to CE regulations Operating instructions in GERMAN and ENGLISH (symbol photo) Various options and equipment variants possible.

Condition: new, Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of construction: BEstellbar New (delivery time 6 - 8 weeks) Working range X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h sheet thickness mild steel: 25 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 20 mm sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneously: 280 m/min. positioning accuracy: +/- 0,05 mm Repeat accuracy: +/- 0.05 mm installation area l/w/h: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-Focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameters page (performance-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Workspace lighting warning light Multi-chamber extraction system Special Laser Cutting Options Remote maintenance CE Marking Iodpofkpamofx Ab Isa Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, Compact dedusting system Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek Software with positioning - Laser diode with automatic sheet metal position detection, measurement Pierceline Focusline

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Iedpfx Ajd Tt Atjb Isa Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Make: DURMA Type: HD-F 3015 III Fiber Working range X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 30 mm Sheet thickness stainless steel: 26 mm Sheet thickness aluminum: 15 mm Sheet thickness brass: 20 mm Sheet thickness copper: 15 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameter page (power-speed-pressure) Ijdsdx Nalopfx Ab Isa External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto nozzle changer (Nozzle Changer) The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Iodpfx Ajdx Rd Njb Iea Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Year of construction: 2024, condition: new, Machine dimensions: - (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm, - Width with console: 7,700 mm. - Length with filter: 11,000 mm Iodpfx Absdyfwko Isa Technical details: - Max. sheet size: 4.000 x 2.000 mm - cutting speed: 12 m/min. - positioning accuracy: ± 0,1 mm - Repeat accuracy: ± 0.1 mm - Power (Hypertherm XPR 170 XD Optimix): 170 A - Cutting area: - Unalloyed steel, piercing, argon: 40 mm - Unalloyed steel, piercing, air: 35 mm - Unalloyed steel, separation cut: 60 mm - Alloy steel, hole piercing: 22 mm - Alloy steel, cut-off: 38 mm - aluminium, hole piercing: 25 mm - aluminium, separation cut: 38 mm Basic equipment: - Control: Durma Aurora CNC controller - Truehole Standard - Sheet metal measurement by laser - Burner height control - AC servo motors for X and Y axis - Software: Lantek, or Metalix Cad/Cam software with Autonesting - 50 pre-programmed part geometries for easy and quick modification. - consumption kit (burner nozzles, etc.) - Plasma torch - ignition console - Remote - Control: Remote maintenance options are included: - Hypertherm XPR 170 XD + Optimix + automatic gas control - Filter for HPR 170 XD - Safety system with circumferential safety wire - Oxyfuel torch with sensor - Plasma torch - demolition system - Air dryer

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Iedpoq Tpkyofx Ab Ija Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: new, Year of construction: 2024, Tube and flatbed laser 4 kW | Combi HD-F 3015 BH Laser combination machines Machine dimensions: - (L x W x H) 9,350 mm x 3800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. sheet weight: 200 kg/m² -Laser power (IPG): 4 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting area: - steel: 20 mm - stainless steel: 10 mm - Aluminium (AlMg3): 12 mm - brass: 10 mm - copper: 6 mm Equipment: IPG 4000W Fiber Laser Source (including cooler) Compact dust extractor (filter) for 4 kw Air conditioning in switch cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Iedefl T T Nepfx Ab Isa Auto focusing Precitec Procutter F150 focus cutting head Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal testing (Autom. sheet metal position and size measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface parameters page (performance-speed-pressure) Software Lantek or Metalix Cad/Cam Software with Autonesting Lighting for the work area Multi-chamber suction system warning light Special Laser Cutting Options Positioning laser diode Pierceline (E

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015 15 kW laser cutting system . Technical details: - Max. Sheet metal size: 12,000 mm x 2,000 mm Max. - Max. sheet weight: 235 kg/m² -Laser power (IPG): 15 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting range: - steel: 40 mm - Stainless steel: 30 mm - Aluminium (AlMg3): 30 mm Equipment: IPG 15000W Fiber Laser Source (Cooler included) Compact dust extraction (filter) Air conditioner in control cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter cutting head F150 focus Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal inspection (Autom. sheet metal position and sizes measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication system Motorized chip conveyor Simple user interface parameter page (power-speed-pressure) Lantek or Metalix Cad/Cam software with Autonesting Lighting for the working area Multi-chamber suction system Warning light Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for Cad/Cam programming Application training Isdpfegyfm Esx Ab Isa Remote maintenance

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on linear guide ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: Iodpfx Asrwniqeb Isa ・The price quoted is for the machine only. Tools and freight costs are not included.

Condition: new, Year of construction: 2024, TP turret punch presses With Durma TP series punch presses, you can achieve top quality with precise and fast turret, improved hydraulics and 3 automatic index stations. With movable platen, part unloader, automatic clamps, Cad/Cam software and control unit, Durma turret punch presses are easy to use. With automation systems that increase both work safety and productivity, user safety is also increased while reducing wasted time. Punching force: 30 tons Working area: 3.000+R x 1.500 mm X-axis movement: 3.000+R mm (repositioning) Y-axis movement: 1.500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min speed combined X+Y: 92 m/min max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 1,100 1/min max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 325 1/min max. marking speed: 1.200 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting capacity with fixed tool station steel: 6 mm max. cutting capacity with fixed tool station NiRo: 3 mm max. cutting capacity with index station Stah: 3 mm max. cutting capacity with index station NiRo: 1,5 mm Tool changer (27 stations without tool and holder): 11 x A-station fix: 0,8-12,7 mm Iodpfeg Admfjx Ab Iea 11 x B-station fix: 12,8 - 31,7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D station fixed: 50.9 - 88.9 mm 3 x D-station index: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeating accuracy: +

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of manufacture: 2024 Working range X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 10 mm Sheet thickness aluminum: 12 mm Sheet thickness brass: 10 mm Sheet thickness copper: 6 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Precitec Procutter F150 focus auto-focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Iodpjd Sd Tnofx Ab Ija Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dedusting Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet position detection, measurement Auto. Nozzel Changer (nozzle changer) Camera Inside The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 654311519, Offer 25321 Technical data: - Cutting length up to 200 mm - Cutting thickness – steel up to 6 mm – stainless steel up to 4 mm - Infinitely adjustable cutting angle: 30° – 140° - Hydraulic hold-down device - Stroke rate: 28 strokes/min - Depth stops with angle adjustment - Table height approx. 920 mm - Drive: 400 V / 4.0 kW Iedoxqycdjpfx Ab Ija - Electric foot pedal - Space requirement approx. W 1050 x H 1350 x D 1200 mm - Weight approx. 950 kg

Year of construction: 2013, condition: ready for operation (used), A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible. Ijdoxph R Topfx Ab Isa

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6085074953, Offer 24169 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 13 mm - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs - Motorized backgauge positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 15 per/min - Hydraulic drive 400 V / 30 kW - Space requirement incl. back gauge, without front support arms - approx. W 5400 x H 2250 x D 2250 mm - Weight approx. 16000 kg Ijdpfx Abstrw Hms Ija - with: - electric foot - switch - cutting line lighting - - cutting length preselection - rear of machine with light barrier safety device