SPECIAL OFFER guillotine shears

Durma MS 2504

Condition: good (used), Year of construction: 2006, machine/vehicle number: 313406334, Offer 24236 Technical specifications: - Max. working width 2550 mm - Max. cutting capacity St 40 4.0 mm - Cutting angle 1.30° - Position-controlled backgauge 20 - 750 mm Pedewd Nu Sepfx Afhepl - Front angle stop + support arms - Electric foot switch - Stroke rate up to 34 per minute depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including backgauge, without front support arms - Approx. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW Pjdpjtpnplsfx Afhopl - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: used, Year of construction: 2009, sheet thickness steel (max.): 4 mm, back gauge: 750 mm, cutting length (max.): 2,550 mm, Motorized Guillotine Shear Manufactured by Durma, Type MS 2500 x 4 mm Year of Manufacture: 2009 Technical Specifications Manufactured by DURMA Type: MS 2504 Year of Manufacture: 2009 Sheet Thickness: 4 mm Cutting Length: 2,550 mm Cutting Angle: 1°30' Stroke/Min: 42 Motor: 7.5 kW Backgauge: 750 mm Dimensions: L 3.15 x W 1.75 (plus support arms 0.6 m) x H 1.33 m Weight: 3.3 t Features - Controlled backgauge 750 mm Pjdpfov Rntzjx Afhjpl - Support arms - Angle stop - Manual cutting gap adjustment - Foot switch - Operating instructions All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m Ppsdsfrvzvepfx Afhsl injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. Ppsdsfv H Dkopfx Afhjl The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm Pedpfxsd Sitkj Afhjpl quill mounting MK 4

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Pedpjc Sd D Sjfx Afhspl

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm Podpfx Aevrxnxsfhopl All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3 iTRONIC-V Year of manufacture: 2023 Condition: New machine Speed 80 - 1.125 rpm. standard equipped with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Ppedpsh I N Trsfx Afhsl Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - clockwise and counter-clockwise rotation via contactor control - automatic drill feed with feed overload protection - spindle protection - operating instructions other important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,45 / 1,9 kW Motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - foot switch, complementary to the threading device - Technology calculator in the display - Drilling depth fine adjustment and fixed stop

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Psdpfx Ajd Hy Eljfhepl Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm