Used Eisele Vms 1 for sale (115)

Condition: used, Year of construction: 2014, Hydropneumatic operation Profile height: 160 mm below hold-down Max. punching height: 145 mm thanks to 2-way adjustable punch heads Abutment height: 120 mm Pressing force: 56 kN at 8 bar Cajdpfjxta Rgex Addea Weight: approx. 400 kg

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m Casdpfx Adju Nit Rjdea SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 6052, Designed for corner crimping of aluminum profiles ("corner crimping machine"). Maximum profile height: up to approx. 140 mm. Maximum pressing height: up to approx. 100 mm. Press force: 56 kN per head. V-block (anvil) height: up to approx. 80 mm. Supplied with 3 standard sets of crimping tools (3 mm, 5 mm, 7 mm). Foot pedal controlled as standard. Pneumatic pressing (pneumatic press operation via leverage) with a working pressure of 6–8 bar. Csdpoxu U E Ijfx Addjaa

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected Caedpfoxwkdxox Addja - 6 sawing speeds . .

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Cajdpfjxpd D Nsx Addoa Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Loading Unit: Horizontal loading magazine model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Maximum material height as per saw cutting area; round material max. diameter 130 mm 3 glide strips between timing belts provide additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Maximum saw blade diameter: 500 mm Continuously variable speed adjustment Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 controller with touchscreen Codpfxjxvbvve Addeaa Reversing device with five-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting gap extension, both sides Pneumatic extraction slide Scrap flap after the saw for offcuts / remnants Cut-off length depends on profile, from 8 mm Menzel minimal quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust collection Unloading: Table area 1,500 mm x 2,500 mm Pneumatic cross transfer

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cedpjxn Iq Dofx Addjaa cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Cjdpfx Aou Niuhoddeaa Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Codpfxovdk A Ee Addsaa Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Cedpfxexl R Nkj Addeaa

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 360 kg, • Dimensions (W × H × D): 900 × 1,180 × 750 mm • Weight: approx. 360 kg • Drive type: hydropneumatic • Operating pressure: 8 bar • Air consumption: 40 l / stroke at 8 bar • Pressing force: 32 kN at 8 bar • Pneumatic connection: R ¼" Caodpfx Ajxl Hq Rjddoa • Press stroke: 17 mm • Return stroke: 140 mm • Maximum pressing height: 150 mm • Maximum profile height: 210 mm

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Codpfx Aexptxpsddeaa Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic)

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Cajdpfxjxl Dz Tj Addsa Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Cajdpfxju Niuze Addsa Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Caodpfxjxpqzho Addja Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S Casdpfsquuufex Addea MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I - Year of manufacture: 1967 - 380 Volts - 1450 rpm; 2950 rpm - 1.8 kW Csdpfx Adexa Hkmjdoaa

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Cajdpfx Adjxmhkbodsa Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Cjdpovcmirofx Addeaa Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° Cjdsu Nimqopfx Addsaa air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm Codpfx Asxabw Ujddoaa capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm Caedpfxeb N Eics Addja rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm - Pre-installation for chip extraction MG9 - Database for storing cutting data under profile number - 32 pcs combined machine taps M8x1.25 - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours. Caedpfxjxmhhgj Addsa

Condition: used, Hydraulic operation via foot switch Profile height max. 120 mm Abutment stroke 100 mm Cajdpfx Asw U Slgsddoa Punching stroke 50 mm Press force 38 kN Engine power: 3 kW Weight approx. 500 kg

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Caedpfx Adexmhf Eedoa