Used Eisele Vms 1 for sale (127)

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Dwodpfx Adorz Rw Rjroa Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: defective spare-parts repository (used), Year of construction: 1975, functionality: unexamined, machine/vehicle number: 3015, rotational speed (min.): 40 rpm, rotational speed (max.): 80 rpm, input voltage: 380 V, EISELE VMS2-D045 Cold Circular Saw – defective / untested Dedey Uq U Ispfx Adrewa Selling a used EISELE cold circular saw, type VMS2-D045. The machine is explicitly sold as defective or untested. Sale is exclusively as a DIY project, a source of spare parts, or for repair. The saw was taken out of service for safety or age-related reasons. No guarantee on function, accuracy, or operational safety. The EISELE VMS series is considered a robust industrial metal cold circular saw with a solid machine construction and high cutting accuracy. Technical data Manufacturer: EISELE Type: VMS2-D045 Machine type: Metal cold circular saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile materials Pneumatic vise Coolant system available Multiple saw blade speeds High-voltage connection 400 V Pneumatic saw feed Solid cast iron machine construction Key technical data of the VMS series Saw blade diameter, depending on the version, approx. 275–315 mm Cutting range up to approx. 100 mm round material 2 cutting speeds, approx. 40 / 80 rpm Motor power, depending on the version, approx. 1.4–3.6 kW Condition used Sold explicitly as defective untested condition ideal as a source of spare parts or a restoration project no warranty no returns Inspection is highly recommended Loading and transport by the buyer Note Technical specifications according to the nameplate or existing version. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min Dwoded Rxw Sspfx Adrsa engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm Dedpfx Adefnrw Serswa cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Dwedpfxexln Ukj Adrea Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm Dwedpfx Adoy N D Nnjroa total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm Dwodexabk Uopfx Adrea capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Dwodpfx Aokfp D Tedrea Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Dwedpfx Adof Dwa Ujrea Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW Dsdjy Ehx Espfx Adrjwa weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Dodpfsllvpwsx Adrowa Feel free to contact us for a non-binding quote!

Year of construction: 2001, condition: used, Profile height: max. 150 mm Profile width: max. 300 mm Dwedpfx Aozmhqzedrea Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Condition: excellent (used), Year of construction: 2017, fully automatic operation Drive: 7.5 kW, S6, 400 V, 50 Hz, 2850 rpm For use with saw blades D 550 mm Cutting range: 270x140 mm (width x height), D 185 mm Max. profile width: 270 mm Control panel with display Includes piece counter Includes reversing mechanism for a maximum section length of 3000 mm Automatic shutdown via limit switch when the material runs out Hydropneumatic saw blade feed, infinitely adjustable, from bottom to top Vertical and horizontal clamping device, on the feed and discharge side of the saw head Pneumatic dosing spray device Cutting gap widening on both sides of the saw blade Electronic material feed unit, 3-600 mm feed length, with ball screw and servomotor, includes pneumatic horizontal and vertical clamping device, Remaining piece from 75 mm, depending on the profile 2 dust extraction nozzles D 100 mm Safety guard over the saw head and the feed unit Dwodpfxozn H Uho Adrja A suitable dust extraction system can be offered as an option!

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. Dwsdpfx Adozhki Aoroa The machine will arrive at the end of August and will then be refurbished. The photos show the original condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Dodpfx Aew D T Uijdrjwa Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm Dodpfxoilfp Ns Adrswa stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Dwsdpfszcpv Ssx Adrea Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dwjdpfx Aefitbwedrja Dimension 60 x 850 x 1500 mm Weight 300kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers Dwsdpfx Aey S Aa Dodroa

Condition: excellent (used), Length: 2100 mm 7 rollers, width: 200 mm Dedpfjiraqijx Adrowa Rollers-Ø 40 mm

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Djdpfxey Agqne Adrowa

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Djdsxpd D Nspfx Adrewa Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: used, Max. punching force: 100 kN Adjustable stroke, max. 50 mm Stroke activation via foot switch Weight: approx. 600 kg Dwodpfexrmz Aex Adrsa

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Dwsdpfx Aoxvbvvedrja Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Ref Code:1027 Dwedszlaucspfx Adrea Prisma 600 Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication