Used Emag Vl 3 for sale (99)

Condition: used, _____ Description: Year of manuf. : 2008 Control : Fanuc 18i-TB Turning diam. : 130 mm Turning length : 110 mm In Generel: Year of manufacture:2008 Control system:Fanuc 18i-TB Turning diameter:130 mm Turning length:110 mm Rotation diameter:200 mm Workpiece height max.:110 mm Spindle: Technology:Motor spindle Speed:7,500 rpm Power:24 kW Torque:158 Nm C-axis:0.001° Clamping cylinder:Full clamping cylinder Lhodpfowkcldsx Aabon Tool carrier (X/Z): Technology:Star turret Number of stations:12 Tool holder:VDI 40 Tool drive:6,000 rpm, 40 Nm X-axis:400 mm Z-axis:200 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:High-pressure pump Automation:Circulating workpiece storage Emulsion mist extraction:Mechanically prepared

Condition: excellent (used), Year of construction: 2005, Fanuc 18 iTB control Swing diameter 210 mm, X/Z travel 400/200 mm, Lhodpsw Rdcpsfx Aaben Spindle speed 7500 rpm, 12-station turret with driven tools. Chip conveyor belt, 3-jaw chuck Chip conveyor

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Ledpfx Aaou T Shvobshn Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: good (used), Year of construction: 2011, For sale is an EMAG VL 5i F ex location Lhjdsup Tinepfx Aabon

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for driven tools (C442) with internal coolant supply to the tool Maximum speed: 6,000 rpm Corner speed: 3,200 rpm Tool carrier unit for driven tools: 12 x BMT75 Circulating workpiece transport system, O-version Drag frame system for 10 workpieces Workpiece height (including workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pcs) drag frames for O-belt For workpiece diameter: 150 - 400 mm Blow-off for workpiece and clamping device (pick-up) Coolant supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. Ledjvq Iwyepfx Aabshn Cooling unit (6.5 kW, water - air) A cooling unit (with 2-circuit technology) regulates the thermal balance of the machine. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filter fineness 100 μm, with electrical and mechanical contamination indicators Chip conveyor Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction system: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with probe Blow-off for measurement probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal tower Axial drilling/milling head – BMT75 CC 5x angle drilling/milling head 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic 3-jaw power chuck KNCS-N 500-155 quick change Max. = 2,200 rpm (reference speed according to DIN 6386) Set of hard master jaws Set of soft top jaws Attachment parts for KNCS-N 500-155 Flush nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 Rough turning tool external 1x 8.BMT25VL8IKX50 Finish turning tool external 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping holder 1x 40.75V5KRVL8IKD Milling cutter 50mm 3x 80.75V5VL8IKD Boring bar holders 2x 27.V520HYDL26 Drill diameter 20mm 1x 42.V522L08IK Drill diameter 22mm 1x 27.V514WNL31 Drill diameter 14mm Software package Operating manual / maintenance manual 221025ä

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station Lsdpfoxf Apvjx Aabohn MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm number of tool places 12 Pos. Shank diameter 40 mm x-axis 850 mm z-axis 315 mm rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Lsdoxfwffspfx Aabehn Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 00404, turning diameter: 250 mm, Available from: 10.10.2025 – The system consists of two individual units that are linked together. TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 260 mm MACHINE DETAILS Power supply: 3-phase AC Frequency: 50/60 Hz Operating voltage: 400 V AC Control voltage: 24 V DC Connected load: 36 kW Rated current: 58 A Ledpfxjw T Rx Ne Aabjhn Main fuse: 80 A NH Total weight: 6,500 kg EQUIPMENT - No driven tools

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 105958, travel distance X-axis: 700 mm, travel distance Y-axis: 375 mm, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 100 mm, workpiece length (max.): 150 mm, The automation is included in the scope of delivery! TECHNICAL DETAILS Travels Lsdpoxb Tu Isfx Aabehn X-axis: 700 mm Z-axis: 375 mm Workpiece Chuck diameter: 160 mm Max. workpiece diameter: 100 mm Max. workpiece length: 150 mm Main spindle Power 40% / 100%: 19.5 / 12.5 kW Torque 40% / 100%: 75 / 48 Nm Max. speed: 6,000 rpm Turret Tool stations: 12 Rapid traverse speed X / Y / Z: 60 / 30 / 30 m/min Driven tools Speed: 6,000 rpm Torque 30% / 100%: 27 / 15 Nm MACHINE DETAILS Frequency: 50 Hz Operating voltage: 400 V Connected load: 30 kW Total weight: 6,000 kg

Condition: good (used), Year of construction: 2011, Control: FANUC max. workpiece diameter: 220 mm max. workpiece weight: 20 kg max. turning length: 175 mm Ljdpfovzrk Sex Aabohn max. speed: 4,500 rpm travel path: X 660, Z= 300 mm tool changer with 12 stations chip conveyor

Condition: used, Year of construction: 2014, functionality: fully functional, Travel path - X axis: 740 mm Travel path - Z axis: 400 mm Travel path - Y axis: 30 mm (optional) Chuck diameter: 260 mm Max. turning diameter: 200 mm Ledpfjw Imtfjx Aabshn Spindle speed: 4,500 rpm Tool speed: 6,000 rpm Rapid traverse Z-axis: 15 m/min Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 30 mm Machine weight approx.: 9,000 kg

Condition: used, functionality: fully functional, We are offering a complete EMAG line consisting of 6 machines (VL3, VL5, and VL5i – see nameplates) including central chip conveyor and coolant supply. The machines are in operational condition and can be inspected under power at our facility in 47225 Kedzierzyn-Kozle, Poland. We are happy to sell internationally, but please note that special packaging will be required for overseas shipment. Disassembly and export packaging suitable for shipping overseas are the buyer’s responsibility. The listed price is for a single machine without chip conveyor and coolant supply. If you purchase the entire line, the price is EUR 120,000, including chip conveyor and coolant supply. Lhjdou U D E Nepfx Aabjn

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ledjwqr S Tepfx Aabshn Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Available from October 10, 2025 Ledpfexc Idgjx Aabohn The system consists of two individual systems that are linked together. No driven tools! *

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Lsdpfjvva Hksx Aabjhn

Condition: used, Year of construction: 2015, turning diameter 220 mm swing diameter 270 mm turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm y-travel 300 mm z-travel 200 mm Ljdpfx Aajvxwrcobohn turning speeds 7500 U/min tool change unit 12 fach total power requirement 24 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 2,50 x 1,60 x 2,30 m

Condition: used, Year of construction: 2006, A VL 5 oLT, built in 2006, is for sale ex-works. The machine can be inspected under power. Ljdeup Tizspfx Aabshn

Year of construction: 2011, condition: ready for operation (used), An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible. Lhedpfx Aewtg E Tsabjn

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Lhodpfx Asxnnigjaben Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Ljdpsqvd Iuofx Aabehn Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2021, Ser. no. 11479, control, manufacturer Siemens, type Sinumerik 840Dsl, workpiece Ø 200 mm, workpiece length 100 mm, main spindle 18 kW, speed 3,000 rpm, 12-position tool turret, external grinding spindle TSE 200, dressing unit, workpiece transport system, 21 workpiece carrier pallets, chip conveyor, emulsion mist extraction, 2x coolant supply 8/30 bar, paper band filter, magnetic pre-separator, inline workpiece measurement, handling system interface Siemens Profinet, double piston clamping cylinder, flange mandrel +++ Attention: Machine is part of an online auction! +++ Lhjdpjwzvnysfx Aabsn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) Ledpfx Asw Hxuasabshn A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2008, Technical details: x-travel: 2665 mm y-travel: 2440-2890 mm z-travel: 750 mm max. torque on the spindle: 4400 Nm control: Siemens 840D workpiece diameter - max.: 800 mm workpiece length - max.: 750 mm tool changer with: Scheiben-Revolver 12-fach places Lodpsw S Htaofx Aabshn spindle speed:: 750 U/min tool taper: 50 voltage: 400 V Total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 7,0 x 3,1 x 4,5 m The machine has a turret with 12 tool stations (VDI 50) and a milling spindle with a tool changer for up to 96 tools. The tool magazine can be loaded during machining, which reduces setup time and allows the use of “sister” tools. The proven EMAG turret is available for turning operations on the machine. The VLC 800 MT multifunctional machining center can completely machine parts up to 800 mm in diameter in a single clamping. If necessary, a new (unused) spindle unit can be purchased as an option. (#1100673) *

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Lhedev S Dnkepfx Aabjn Spindle: Technology:Motortspindle Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Lhedeqvd Iqspfx Aabjn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2