Used Elumatec Mgs 73 for sale (139)

Year of construction: 2013, condition: used, Max. saw blade diameter: 380 mm Stepless saw blade feed via two-hand operation Dsdpfx Anjzgupqeqeci Pneumatic material clamps Minimum quantity spray device Weight: about 350 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0733336662, Mitre saw elumatec MGS 73/33 Versatile for use with aluminium and PVC profiles Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Hydro-pneumatic saw feed 2-hand operation Pneumatic profile clamping (2x horizontal, 1x vertical) Pulsed coolant system Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Dsdpfx Ansy Nncroqeci Power output 3 kW Compressed air supply 7 bar Length 850 mm, depth 900 mm, height 1,450 mm, weight 220 kg Machine is ready for operation

Condition: used, Year of construction: 2009, Saw blade diameter 500 mm. Manual angle adjustment from 90° to 45°. Lower blade feed into the cut. 4 kW motor (400 V). Pneumatic upper profile clamping. Blade cooling and lubrication system. Extraction unit with chip collection container. Seldom used. Dodpfxoy Rhy Te Anqoci

Condition: used, Year of construction: 2007, Technical data: Dodpfx Ajrwlwvenqsci Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg Dedpfx Anezf Agzeqeci

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Dcedsy Uyfpepfx Anqsi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Dodpfx Anjyxgyneqoci Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Dcodpfxsynacys Anqei Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg

Year of construction: 2018, condition: used, functionality: fully functional, Information about the machine: The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced. Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop. Machine description: - Efficient machining of aluminum, plastic, and steel profiles - Continuously positionable A-axis from -120 to +120 degrees - Linear guides for clamp movement - Processing results are improved by intelligent control technology - Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives - Thread cutting without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer Dcsdoyr H Abspfx Anqsi - 4-axis control - No reference run required for main axes due to absolute encoder systems - Collision avoidance via automatic clamp recognition and positioning - Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering. Green-Line cooling unit for the control cabinet with reduced energy consumption. - Windows operating system - 15" flat screen, USB ports and network connection - Simple and convenient program entry using eluCam at the operating terminal – even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Safety enclosure for operator protection - Four horizontal pneumatic clamping units - Material stop left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical data: - Max. machining length (without face-side machining): 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining directions: 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Max. spindle speed: 20,000 rpm - Spindle power: 7 kW, S1 (water-cooled) - Tool holder: HSK-F63 - Automatic tool change - 12 tool positions in automatic magazine - Max. disk cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp movement - Spanner Basic (with round guide) - Software: eluCam - Compressed air supply: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l with spray Accessories for the machine (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disk cutter - Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circle, for overlength processing - Various used tool holders and cutters - ESTA swarf extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW, and V6 files

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Dsdpfxjyg Rfcj Anqeci Collection must be made on Tuesday 3rd March 2026.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Dcsdpfxsuiy Ngj Anqsi Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Dsdpezgfvbefx Anqoci Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Dcjdpfx Aozhuyfsnqji Usable length: 7.6 m EQUIPMENT 12 pneumatic clamping chucks 2 work areas

Condition: used, Year of construction: 2010, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements Dcsdpoy U Tg Hsfx Anqsi The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 2008, functionality: fully functional, Elumatec 130 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Speed continuously adjustable up to 6,000 rpm Dedpsy U Dtqjfx Anqsci handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Dcjdpfxozi A Uaj Anqoi Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 EU shipping - 350 euro Dcedovi R Avspfx Anqji

Condition: excellent (used), Shipping within the EU: 350 euros Dcodpol Sklgsfx Anqsi

Condition: excellent (used), shipping EU ~300euro Dsdpfsl Skk Uox Anqeci

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: Dsdpfx Aoyt H Uyenqjci - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Condition: used, Automatic feed via Elgo control E 255 Dodpfx Anoywxwpeqjci For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Dedpfxjzh Iuco Anqeci Pneumatic parking brake

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Dcodpezh Itfofx Anqoi Max. push length: 3000 mm

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg Dsdpfxjzh Irbo Anqjci

Condition: used, Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg Dodpoinwuqofx Anqjci