Used Elumatec Mgs 72 for sale (136)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Rodpfx Aeyxgynjmnsw Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Redjrwlwvepfx Amnow Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Year of construction: 2013, condition: used, Max. saw blade diameter: 380 mm Redpfjzgupqex Amnjw Stepless saw blade feed via two-hand operation Pneumatic material clamps Minimum quantity spray device Weight: about 350 kg

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Rjdszf Agzspfx Amnow Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Condition: used, Year of construction: 2009, Saw blade diameter 500 mm. Manual angle adjustment from 90° to 45°. Lower blade feed into the cut. 4 kW motor (400 V). Pneumatic upper profile clamping. Blade cooling and lubrication system. Extraction unit with chip collection container. Seldom used. Redpsy Rhy Tsfx Amnsw

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Redpfoy Uyfpjx Amnjw

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0733336662, Mitre saw elumatec MGS 73/33 Versatile for use with aluminium and PVC profiles Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Hydro-pneumatic saw feed 2-hand operation Pneumatic profile clamping (2x horizontal, 1x vertical) Pulsed coolant system Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Rsdpfxoy Nncrj Amnow Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Length 850 mm, depth 900 mm, height 1,450 mm, weight 220 kg Machine is ready for operation

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg Redsynacyopfx Amnjw

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026. Rjdpfx Ajyg Rfcjmnew

Year of construction: 2005, condition: good (used), Double-head PVC profile welding machine. Rodozdqpbopfx Amnew

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Rodpfx Aeuiy Ngsmnjw Training of your employees

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Rsdpjzgfvbefx Amnjw Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: used, Year of construction: 2010, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) Rsdjy U Tg Hopfx Amnew With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 2008, functionality: fully functional, Elumatec 130 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Rodpfey U Dtqjx Amnew Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Redpsywxwpofx Amnsw

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Rodpfxszh Iuce Amnow Pneumatic parking brake

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 Rsdpfx Ajzh Itfemnsw For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg Rsdpfxozh Irbs Amnjw

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Rsdpfx Amjxqihisnew Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2017, Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. Rjdpfozgu Efox Amnjw E 580 control system. Disc diameter: 500 mm. Cutting according to external dimensions, without correction. Automatic lowering and raising of disc guards. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer.

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Redpfx Amszf I Uwsnow Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Rjdpfjzf I Ttjx Amnow Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Redpjzgglkjfx Amnew Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Quick setup and high machining accuracy.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Technical data – Elumatec TS 161 Machine type: Table saw Saw blade diameter: 280 mm Saw blade speed: 3,200 rpm Motor power: 1.1 kW Operating voltage: 400 V / 3~ / 50 Hz Swivel range: 0° to 45° to the left Cutting speed: 3,200 m/min Dimensions (L × W × H): approx. 650 × 750 × 1,300 mm Rodpfx Amezf Rllonsw Weight: approx. 96 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw - Power: 1100 W - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with HECHT manufacturer's control system, as well as a bilateral roller guide, width: 90 mm Attention: the item must be picked up on a fixed date of July 2, 2026, at a time to be agreed upon. Rodszdyrrspfx Amnsw FCA D-72770 Reutlingen – loaded onto a truck.