Used Elumatec for sale (122)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Dlodpexx Uf Njfx Addea Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm Dsdpfxoxy Hcis Addsla MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, cutting length (max.): 6,000 mm, - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E255 control Dljdpjx Aqhzefx Addea - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Dsdpfx Adjx D S N Nodola Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2003, condition: used, Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Dledpex Ecgnjfx Addsa Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device label printers

Condition: used, Year of construction: 1996, 1 pc. double mitre saw ELUMATEC DG 104/00S as per photos and inspection, with control unit Year of manufacture: 1996 Dimensions (L/W/H): 450x190x50 cm Condition: used Payment method: advance payment via bank transfer Storage location: production hall Shipping: Collection only – no shipping available for this item! Dsdpfxsx A A Aqj Addsla

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling a CNC machine. Price 36000. Dsdpfxjw Rnl Ij Addjla We also have a complete line for the production of PVC and aluminum windows and doors

Year of construction: 1991, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: • Manufacturer: elumatec Dedpfsw Tcrhex Addsla • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1991

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 1400040588, Elumatec SBZ 140 - X: 7900 - Y: 850 - Z: 650 mm metal milling machine 4 axes industrial profile machining center Dedpox Akgkofx Addela

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Additional functionalities with extraction unit and roller conveyor for improved operation Dsdpfjx D Ix Hjx Addsla Extraction unit DG 104 cpl Roller conveyor 3m Profile lifting bars This Elumatec DG104 sawing machine was manufactured in 2006. It features a double mitre saw with a 420mm diameter and an E 555/3 for 22.5º inside cuts. Additionally, it includes an extraction unit DG 104 cpl, a 3m roller conveyor, and profile lifting bars. A great opportunity to buy this Elumatec DG104 sawing machine. Contact us for more information. Application Types Sawing

Year of construction: 2006, condition: used, Control E 550 Max. X-axis travel: 2,500 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Speed infinitely variable up to 21,000 rpm. Manual control unit Minimum quantity spraying Manual tool change 5 pneumatic material clamps light barriers Dlsdpox Ecfkefx Addea

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Dljdpfx Adow Sadredea

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting Dodpfxexz R Ixe Addjla ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Year of construction: 1997, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Dledew Tcpyspfx Addsa Technical data: • Manufacturer: elumatec • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1997

Condition: good (used), functionality: fully functional, machine/vehicle number: 1050126453, Year of construction: 2006, The saw works flawlessly. Djdpfsxq Tacex Addola

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 07900350045, saw blade diameter: 380 mm, total width: 4,500 mm, Double mitre saw Elumatec DG 79, purchased new in Nov. 2006, used, fully functional, pictures attached, purchase invoice with electronic and machine data included. Djdpfxsx D Tmpj Addsla

Year of construction: 1999, condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw unit with hand crank and digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides Dledpfx Adsxz Enmjdoa 2-Hand-Bedienung Machine is dismantled on timber

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) - E355 control - Digital angle indicator Dsdpewy Emcjfx Addsla - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm Dljdpfx Ajx Diqwoddea 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2007, condition: used, functionality: fully functional, Equipment: CE marking, For Sale: Elumatec SBZ 122/10-30 CNC Profile Machining Centre (2007) The Elumatec SBZ 122/10-30 is a reliable and versatile CNC machining centre designed for processing aluminium, PVC, and thin-walled steel profiles. This 2007 model offers precise 3-axis CNC control combined with a rotating angle head, allowing machining on five sides of the profile without repositioning. With its robust construction, proven Elumatec technology, and automatic tool changer, the SBZ 122/10-30 remains a valuable machine for window, door, façade, and general profile machining applications. 🔧 Technical Specifications Year of manufacture: 2007 Axes: 3 CNC-controlled (X, Y, Z) Working range: X-axis: approx. 3,850 mm Y-axis: approx. 350 mm Z-axis: approx. 280 mm Max profile length: Without end machining: approx. 3,750 mm With end machining: approx. 3,650 mm Spindle power: ~6 kW (S6) Spindle speed: up to 21,000 rpm Tool system: HSK-F63 Tool changer: 4 positions + angle head (5 tools total) Accuracy: ±0.1 mm 📐 Dimensions & Weight Machine dimensions (L × W × H): approx. 4,600 × 3,230 × 2,420 mm Weight: approx. 1,690 kg 💻 Control Dlsdpfxew Syy Ts Addoa PC-based CNC control (Windows environment) Programming via Elusoft Automatic clamping system for secure and flexible profile positioning ✅ Highlights: Five-sided machining without manual repositioning Automatic tool change for increased efficiency Suitable for aluminium, PVC, and light steel applications Trusted Elumatec design with long-lasting performance

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Dlsdpfxox Dzfts Addea Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Dlodpfexz Sknex Addoa Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Year of construction: 2009, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Dsdpetvrc Sefx Addola CNC, Metalurgia y Fabricación Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg Viewing possible

Condition: good (used), Year of construction: 2006, Year: 2006 Dledpfsr Ikvuox Addoa - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Year of construction: 2001, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Dedpfxsxwyd Io Addela Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg