Used Index C29 for sale (133)

Condition: ready for operation (used), Machine in good operating condition Nodoy Rnd Eopfx Aiyjda

Condition: excellent (used), Year of construction: 2017, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Nedpfx Aiozwhkpoysda Coolant system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. Nsdpozvu Ryjfx Aiyeda • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min Ndjdpfx Aioyxpadoyja y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D Ndedpswzynqsfx Aiyea spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: good (used), Year of construction: 1990, Index MS 25 E (3 pieces per package) Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagon material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Nedpfx Aiszvpt Nsysda Control system: INDEX Total power consumption: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-tool turret - Thread cutting device - Hydraulic part removal device - Workpiece conveyor belt - Bar feeder magazine

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Nodpfx Aiozu Sz Teyjda

Condition: used, Year of construction: 2007, machine/vehicle number: 402235, Spindle bore: 36 mm, maximum spindle speed: 7,000 rpm. C-axis, 1 turret, X/Z-axis, 7-station + synchronized spindle, driven tools, 1 tool turret, X/Z-axis, 6-station, driven tools, control system: INDEX C 200-4 D, back-side machining, workpiece removal, conveyor belt, chip conveyor, bar loader MBL 52/3200. Drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Ndedszqy U Tjpfx Aiyoa

Condition: used, Year of construction: 2007, machine/vehicle number: 511979, Turning length: approx. 400 mm, bar passage: 60 mm, Y-axis, counter spindle, 2x 14-station tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar loader MBL 65/3700, machine requires repair, gear pump defective, repair costs according to quotation: approx. €6,000.00 net, drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Nedpfxjzqy Uys Aiysda

Condition: used, Year of construction: 2007, machine/vehicle number: 511966, Turning length: approx. 400 mm, bar passage: 60 mm, counter spindle, 2 x 14-position tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar feeder MBL 65/3700, the machine requires repair; repair costs according to the cost estimate: approx. €1,880.00 net; drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Njdpfozqy U Hex Aiyjda

Condition: good (used), Year of construction: 2014, See documents. Njdpfozqtg Asx Aiyeda List of individual machines with operating hours, etc. – see documents.

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Ndodpfjtdwwmsx Aiyja

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Nsdjzkld Tepfx Aiyoda

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Nodpfx Aioym Dgmjyeda

Year of construction: 2003, condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Ndodpstdwwqsfx Aiyea

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Nedpfju T Rgkjx Aiysda

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Ndodpfx Aisx Tum Ssyea

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Ndsdpjzuc T Tefx Aiyea Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Nedpeznc Nbofx Aiyoda - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles Njdpfjzdr Ilex Aiyeda 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - maxi feeding length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 Nodpfouhanajx Aiyeda - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT - sub-spindle - foot and drum

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] Ndjdpfezgx Ahox Aiysa EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis, Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle position 6.1 EQUIPMENT Nedpfx Aouhaxleiysda - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - Parts catcher with conveyor in position 6 - Cross drilling device in position 3.1 et 4.1

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE Ndodpfxev Ig Avo Aiyea - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC Nedpfxjuhatpj Aiyjda - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer