Used Turning In Machining for sale (75,593)

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Ndedpjzz S R Ijfx Akmsc

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Nsdetpn S Iepfx Akmedc Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, Technical Data Max. workpiece diameter: 3,800 mm Max. rotational speed: 100 min⁻¹ Workpiece clamping: manual Chuck: Röhm Tool holder: Capto C8 Tool magazines: 2 × 47 slots (94 slots total) Travel Paths X1-axis (right support): 3,200 mm X2-axis (left support): 2,800 mm Z1-axis (right support): 750 mm Z2-axis (left support): 750 mm Workpiece Spindle Speed range up to 100 min⁻¹ Nominal power: 67.4 kW Maximum power: 202.2 kW Max. torque: 71.6 kNm Max. table load: 35,000 kg Water-cooled motor spindle Multifunction Head B-axis with stepless positioning Swivel range: 180° Driven tools up to 6,000 min⁻¹ Hydraulic clamping Direct measuring system High-pressure cooling up to 70 bar Tool Magazines Ndsdpszwa Rbofx Akmoc 2 chain magazines with 47 slots each Tool diameter up to 120 mm Up to 150 mm with appropriate magazine configuration Max. tool length: 400 mm Max. tool weight: 20 kg Chip and Coolant System 2 Knoll chip conveyors Knoll band filter system KF400-2300 Electrical Data Operating voltage: 3 × 400 V AC Protection class: IP55 Connected load: 280 kVA Control: Siemens SINUMERIK 840D sl Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading. Ndjdpfx Aswym Nfjkmsc

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck Ndjdpszat Tvsfx Akmec - Documentations - Dust extractor

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Nsdpfx Aoz Erdtokmedc Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: used, Ceever Spraymaster Turning Spray Washing System The Spraymaster series of industrial washing systems offers advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table, which enables uniform wetting of the components with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Ndsdpfx Aex Ex Nzekmoc Manufacturer: Ceever Type: Spray Master Turning Machine No.: Z 429 Load: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Nedpfxez Dtb Re Akmjdc Flexible speed control.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) Ndodpfjwudkijx Akmjc - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: used, Year of construction: 2012, travel distance X-axis: 450 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, turning diameter: 320 mm, workpiece diameter (max.): 50 mm, overall weight: 11,000 kg, spindle bore: 52 mm, power: 68.3 kW (92.86 HP), Vertical Turning Machine Manufacturer: FELSOMAT Type: FTC180 Year of manufacture: 2012 Control system: Siemens Technical data: - Turning diameter: 320 mm - Turning height: 750 mm Main spindle: Njdpfx Akezbmzpomjdc - Max. speed: 4,500 rpm - Drive power - main spindle: 26.8 / 20.9 kW - Max. torque: 256 / 200 Nm - Spindle bore: 52 mm - Spindle nose: KK A6 (DIN 55026) - Max. chuck diameter: 315 mm Tool turret: - Number of tool stations: 8 pos. - Tool holder: Capto C5 - Max. workpiece diameter: 50 mm - Max. workpiece weight: 0.5 kg Travel paths: - X-axis: 450 mm - Z-axis: 300 mm Feed rates: - Rapid traverse: X 45 / Z 40 m/min - Total power requirement: 68.3 kW - Machine weight: approx. 11.0 t - Space requirement: approx. L 3.7/4.2 x W 1.6 x H 3.0 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, pictured tools, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Ndedpjzz I N Tefx Akmjc Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2014, control Fanuc 31/32 i 2 Ndedpjyvvupefx Akmoc chucking diameter 170 mm swing diameter 210 mm x-travel 400 mm z-travel 200 mm length 2500 mm width 1900 mm height 2300 mm weight 5500 kg

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Nedpfxoz I Nawo Akmodc Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed Nodoidqvcjpfx Akmedc For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: new, Year of construction: 2026, CORMAK AT320 is a professional combination lathe and vertical milling machine designed for precision metalworking in manufacturing facilities, toolrooms, maintenance workshops, and repair shops. By integrating both a lathe and a milling machine into a single compact unit, the operator can perform complex machining operations without removing or repositioning the workpiece, significantly improving accuracy and productivity. The machine is supplied with a complete set of 16 × 16 mm turning tools and an MT3 live center. Key Features 2-in-1 machine – combines a universal lathe and a vertical milling machine in one compact, heavy-duty design. Separate induction motors for the lathe and milling machine provide maximum torque and independent operation. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Hardened and precision-ground guideways together with a hardened gearbox ensure long service life and high machining accuracy. Thread cutting without changing change gears enables fast setup for different threading operations. Vertical milling head with ±90° tilt and 360° column rotation provides exceptional flexibility for angular and multi-sided machining. Integrated coolant system supplied as standard extends cutting tool life and improves machining performance. Construction and Technology The CORMAK AT320 is built on a rigid cast iron bed with induction-hardened and precision-ground guideways, ensuring excellent accuracy even during long carriage movements. Ndjdpfx Aericx Sokmec The 1.5 kW lathe motor provides reliable performance when machining a wide range of materials, including carbon steel, stainless steel, aluminum, and brass. The vertical milling head is mounted on a round column, allowing 360° rotation and ±90° head tilt, greatly expanding the range of possible machining operations. Precision and Productivity The machine is capable of accurate longitudinal, cross, and taper turning, as well as metric and imperial thread cutting. The 12-speed lathe gearbox and 4-speed milling gearbox allow optimal selection of cutting parameters for various materials and machining operations. Standard Equipment Machine stand 160 mm 3-jaw chuck with reverse jaws MT5 and MT3 dead centers Change gears MT3/B16 drill arbor B16 drill chuck (1–13 mm) Coolant system with pump Service tools and oil can Polish user manual CE Declaration of Conformity CE-compliant safety guards Complete set of 16 × 16 mm turning tools MT3 live center Technical Specifications Lathe Specification Value 3-jaw chuck 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 800 mm Bed width 160 mm Spindle bore 38 mm Spindle taper MT5 Spindle speeds 12 ranges (60–1600 RPM) Longitudinal feed rates 0.1–1.4 mm/rev Cross feed rates 0.022–0.3 mm/rev Metric thread range 17 pitches, 0.5–4 mm Imperial thread range 26 pitches, 9–48 TPI Main motor 1.5 / 1.8 kW, 230 V Milling / Drilling Head Specification Value Maximum drilling capacity 20 mm Spindle taper MT3 Quill diameter 45 mm Quill travel 60 mm Head tilt ±90° Head rotation around column 360° Spindle-to-column distance 170 mm Spindle-to-table distance 45–300 mm Spindle speeds 200, 500, 900, 2200 RPM Milling motor 0.55 kW, 230 V Machine Dimensions Specification Value Overall dimensions (L × W × H) 1450 × 650 × 1890 mm Machine weight Approx. 400 kg (±2%)

Condition: excellent (used), Year of construction: 2019, Sub-spindle, driven tools, Y-axis, C-axis FANUC 32i B-NT-SmartX control Turning diameter max 225 mm Turning length -910 mm Chuck Diameter -210 mm Main-spindle speeds 5'000 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Barloader LNS Sprint 565 S2 Piece catching device Misc. accessories MARCELS MASCHINEN CH Ndodpfsvwkirsx Akmoc

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Ndedpfx Aezacwdskmsc Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Ndjdpfew T Sn Ejx Akmjc Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: good (used), Year of construction: 1984, Offer 24126 Motorized bar turning machine + ring and bending machine Technical data: Ndsdpor Ik N Defx Akmjc - Bending process mot. with automatic or manual operation - Bending capacity square bars ST 37 up to approx. 30 mm - Bending capacity flat bars ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Bending time preselection / bending length preselection - Right - left rotation - Tailstock - Arch + ring bending device GRB 66 with various roller sets - Bending capacity - flat steel 60x10 mm high R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roller sets steel 1 ¼" , plastic 1 ½" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm Nodpfx Aksyapx Usmodc - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,700 mm, travel distance Z-axis: 500 mm, Technical specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of manufacture: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travel ranges: X 1,700 mm, Z 500 mm Spindle unit, left side of the machine Maximum speed: 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% duty cycle) Spindle bearing diameter: 120 mm Spindle flange: A8 according to DIN 55026 Grinding unit Maximum speed: 16,000 rpm Grinding wheel arbor: 40 x 10 mm Turret Disc turret: 12-position Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (M28x2 thread) Spindle bearing diameter: 45 mm, hybrid design Maximum speed: 45,000 rpm Rated speed: 30,000 rpm Drive power: 15/18 kW (100/60% duty cycle) Torque: 4.7/5.7 Nm (100/60% duty cycle) Ndedpfezrz Idsx Akmec

Condition: ready for operation (used), Technical data: Ndodpfx Ajza Dwxskmoc Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. Ndsdpovxa Tpefx Akmoc workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: used, Year of construction: 2015, turning diameter max. 315 mm swing diameter 315 mm Nedpevxwrcofx Akmjdc turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm z-travel 300 mm turning speeds 7500 U/min tool change unit 12 fach VDI 40 total power requirement 36 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,4 x 2,2 x 2,7 m Renishaw LP2H Chip conveyor No chuck available No tool holders available No live tooling

Condition: used, Heid S-200 CNC lathe - Manufacturer: Heid - Type: S 200 - Machine type: CNC lathe - Tailstock travel: 175 mm - Tailstock quill mount: - Morse taper: 4 MK - Quill stroke: 140 mm - Quill diameter: 95 mm - Thrust force: 17 kN - Connection 50 Hz 3-phase: 380 volts - Total power requirement: 65 kVA - Spindle speeds: - Continuously variable from 0 rpm to: 4000 rpm - Spindle bore: 77 mm - Tool shank cross-section: 25x25 mm - Turning diameter over the bed: 420 mm - Maximum turning diameter: 250 mm - Turret: - Longitudinal travel (Z-axis): 1150 mm - Cross travel (X-axis): 230 mm Ndedpfex Elw Eex Akmec More items – new and used – can be found in our shop! International shipping costs available upon request!