Used Emco Emcomat Fb-600 Mc for sale (115)

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW generator - rated current 110 A Pgsdpfx Aijqn A Rrjreu connected load 56 kW

Condition: good (used), Year of construction: 2000, functionality: fully functional, ET 332 MC with LM800. Psdpoz Ehnbofx Airogu

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Podpfx Aezhnt Ssirjgu

Condition: good (used), functionality: fully functional, total height: 2,400 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,600 kg, Equipment: documentation/manual, An Emco PCT 345/2 machine is for sale. The machine is in good condition and is being sold due to the purchase of a new machine. A tailstock is included. Pedjzzkgbspfx Airsgu No quick-change tool holder or hollow-bore chuck is included. Location: 45209 The machine has always been well-maintained and is fully functional. The main drive belt and sensor were recently replaced. The machine is available immediately.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial Psdsyffgropfx Airegu • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: Pgjdpfewy Hvxex Airsu - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,612 h, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information. Psdpfx Asyfu Uxsirsgu

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N Pgedpfxsyhcfks Airju • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Pgjdpfx Aisxp Iyhorju Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: excellent (used), Year of construction: 2002, EMCOMAT-E 200x1000 FAGOR 8055BT Pedpfx Aozx Dxljirjgu Year of manufacture: 2002 E20Q100092

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer Psdpfxewkpzle Airogu PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: repair required (used), Year of construction: 2006, functionality: not functional, turning diameter: 450 mm, travel distance X-axis: 303 mm, travel distance Z-axis: 1,160 mm, overall weight: 10,000 kg, swing diameter over bed slide: 700 mm, controller model: Siemens 810D ShopTurn, Note: The main drive motor is currently not functional; an inspection and/or repair is required. Pgsdpfx Ajzt Sbkoirou TECHNICAL DETAILS Maximum turning diameter: 450 mm Swinging diameter over bed: 700 mm Swinging diameter over cross slide: 500 mm Maximum workpiece length: 1,100 mm X-axis travel: 303 mm Z-axis travel: 1,160 mm C-axis resolution: 0.001° Spindle speed max.: 3,500 rpm Distance between centers: 1,230 mm Chuck diameter: 315 mm Bore in draw tube: 95 mm MACHINE DETAILS Control: Siemens 810D ShopTurn Total weight: approx. 10,000 kg EQUIPMENT C-axis Tailstock Steady rest Hollow chuck cylinder Chip conveyor Extraction system

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Pgedpox S Hghsfx Airou Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Connected load, 56.00 kW. Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: excellent (used), Year of construction: 2001, EMCO PCMill 300 PC-840D/TM02 Year of manufacture: 2001 Pgodpfx Aijzx D Dherou F5DP4381

Condition: used, functionality: fully functional, very good condition Psdpfx Aeymnkvoirjgu

Condition: excellent (used), Year of construction: 2018, Rod diameter: 10 – 65 mm Podpfjzkwcnjx Airsgu Maximum rod length: 3,000 mm Multi-track material support

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, feed length X-axis: 750 mm, feed length Y-axis: 610 mm, feed length Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, torque: 100 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC7, total height: 3,060 mm, total length: 4,204 mm, total width: 3,500 mm, table width: 600 mm, table height: 805 mm, table length: 750 mm, table load: 400 kg, rotational speed (min.): 100 rpm, overall weight: 9,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 650 mm, spindle motor power: 26 W, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 80 mm, tool weight: 800 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Complete machine with a 5-axis rotary/tilting table with Torque motors Psdpfx Aijz Hnx Ajregu - Optical scales for X/Y/Z axes - Direct encoders for B/C axes - HSK 63A electrospindle - High-pressure coolant system through the spindle, 20 bar - Chip evacuator - Electronic handwheel - Kinematic option - MARPOSS part cycle probe - Top cover - CE marking

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. Pjdpfxou N Avxe Airsgu The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Pgjdpfx Ajx Tbcyeirou Control: 840 D With chip conveyor

Condition: good (used), Year of construction: 1999, EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Serial No.: F1D V00 Year: 1999 Control: Siemens Sinumerik 810M Technical Features: Travels (X, Y, Z): 185, 125, 200 mm Vertical travel (Z-axis): 100 mm Distance between headstock and table surface: 95-195 mm Table: 420 x 125 mm Maximum load on table: 10 kg Pgjdpev S Tx Esfx Airsu Spindle bearing: Diameter 40 mm Taper: SK30 Tool clamping: Automatic Motor speed: 5000 rpm Speed range: 150-5000 rpm Maximum cutter diameter: 25 mm Accuracy: 0.00125 mm Number of tool stations: 10 Maximum tool diameter: 55 mm Maximum tool weight: 700 g Dimensions: 1730 x 875 x 1892 mm Weight: 570 kg All machine and numerical control manuals are included.

Condition: good (used), Hardness tester, fully functional Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Pgedpfx Aiezvfd Rsrou Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm Pgsdpsvvtpxofx Airsu longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm longitudinal traverse (z-axis): 300 mm control: Siemens 810T revolution per minute: 60 - 4.000 U/min max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 tailstock adjustment: 120 mm Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA The EMCO TURN 340 TC is characterized by its compact design, robust machine construction, and proven Siemens control system. It is particularly suitable for companies looking for a reliable CNC lathe for machining small to medium-sized workpieces. Pgjdpfxjylt Nzs Airsu It is a compact and robust CNC lathe designed for the precise machining of turned parts in both single-part and series production. The machine is equipped with the proven Siemens Sinumerik 810T CNC control system. *

Condition: ready for operation (used), Year of construction: 2010, operating hours: 64,297 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item punctually, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max): 8,000 rpm Bar capacity: 25.4 mm Centre distance: 445 mm Spindle distance: 485 mm Travel X-axis: 100 mm Travel Z-axis: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm MACHINE DETAILS Control: FANUC SERIES 18i-TB Psdpfxoyn Nuxe Airegu Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A Operating hours (according to display): 64,297 h EQUIPMENT Tailstock Main spindle Tool turret (12 positions) Driven tools (6 pieces) Y-axis

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm Pgsdpfxex Apd Uo Airsu turning length: 700 mm spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m