Used Emco Maximat Super 11 for sale (145)

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, travel X/Z 210/610 mm, maximum bar capacity Ø 65 mm, driven tools, Bsdpfjwv N Suex Addslr C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction,

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader condition see pictures Bjdpfx Aeunzgrsddelr

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Blodpedctnbofx Addjr Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,217 h, General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us. Application Types Turning Blodoxfcrdjpfx Addsr

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: S6AW11S1, turning diameter over cross slide: 540 mm, turning length: 550 mm, turning diameter: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all positions Bledpow T Sq Tjfx Adder TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance from spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Transport dimensions of machine: approx. 3.3 x 1.9 x 2.2 m Electric configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet equipped with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Bedpfx Adoxmkcaodslr

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Blsdpfx Adew Tg Adjdor Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Bsdpsxiy Uksfx Addelr Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Bodpsv S Ekyefx Addjlr Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, quill stroke: 100 mm, quill travel distance: 100 mm, total height: 2,120 mm, total width: 2,220 mm, total length: 2,150 mm, overall weight: 2,550 kg, As-new Emco FB6 milling machine (conventional) for sale. We purchased the machine in 2018 from a training workshop and have used it for only about 15 hours since then. (We acquired a 5-axis machining center for angular work...) We are selling the machine due to lack of space. The machine is in perfect condition and ready for immediate operation. Age-appropriate signs of use. The machine was manufactured in 2011. All technical details can be found in the attached photo. All tool holders shown in the photo are included, excluding the rack and the collets installed in the machine. The dividing head on the table is not included either. Blodpfxsxga Sds Addjr You are welcome to inspect the machine. For buyers from Switzerland, 8.1% VAT will be added to the price.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate Bodpfjvwgpbex Addjlr - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Y-axis 80 mm Blodpeppyryjfx Addjr 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Accessories: Hainbuch collet chuck on main and sub-spindle Part catcher Chip conveyor Emco loading magazine LM 1200 Various tool holders

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Bedpfx Ajk Nk I Noddelr

Year of construction: 1985, condition: ready for operation (used), General Data Measurements height 1780 mm Machine weight 2200 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle motor power 1/15 kW Spindle bore 53 mm Number of axis 2 Movement X-Axis Movement 300 mm X-Axis Feed Force 6 m/min Z-Axis Movement 300 mm Workpiece Workpiece drm over bed 340 mm Workpiece drm over support 158 mm Blodpfxsw Epzhj Addjr Turret Number of turrets 1 Tool taper VDI 3425 Tail Stock Pinol diameter 60 mm Pinol tool taper MT4 Tools Number of station 8 This EMCO EMCOturn 340 was manufactured in 1985. A robust horizontal turning machine featuring a swing over bed of 340 mm and a swing over cross slide of 158 mm. It includes an automatic 8-station disc turret and a spindle speed range up to 6000 rpm. Ideal for precision turning with a spindle bore of 53 mm and a rapid traverse speed. Consider the opportunity to buy this EMCO EMCOturn 340 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Blsdpfx Adewcdytsdor Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Two machines are available

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 voltage: 380/400 V Bledpfjua E Naex Adder

Condition: excellent (used), Year of construction: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turned/milled components with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, Bsdjwvlvvspfx Addjlr integrated spindle motors on the main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Main spindle 0 - 7,000 rpm Sub-spindle 0 - 7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity Ø 45mm) Sub-spindle: KK5 Y-axis: • Travel range: +40/-30mm • Rapid traverse: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Part ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 15" TFT color monitor o 3D simulation o and much more • 2x 12-station tool turrets VDI 25 radial version with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (Type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar each 2 pcs. flushing pumps, 3.7 bar each • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German S3Z580 1 pc 22-inch multitouch operating unit HT45 X3Z160 1 pc Tool monitoring Siem. 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion kit 840DSL/828D X3Z710 1 pc 4-axis turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 SIEMENS S3Z21S 1 pc Glass scale Y1 SIEMENS S3Z23S 1 pc Glass scale X2 SIEMENS X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling unit HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600l+conveyor HT45 S30605 1 pc Preparation HT45 sub-spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface for unloading unit S30598 1 pc Wireless measuring probe Renishaw S30599 1 pc Tool layout by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine No. S3A182001

Condition: ready for operation (used), Emco emcomat FB4 Milling Machine CNC control over X and Y axes by Proto Trak Type AGE 2 Blsdpfxjxc H I Rj Adder Also usable in conventional mode. SK40 spindle taper Spindle speeds: 50-2500 rpm X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Equipped with coolant system, emergency stop, and table guard with interlock.

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Bledpfxok Nk Iws Adder

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Blodpeu Rd S Rsfx Addor Ex-College machine

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm Blsdpfx Adewkpzledsr • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: ready for operation (used), Year of construction: 2013, Emco emcomat FB-600 CNC milling machine in Nieuwstraat! Blodpfoxc H H Hox Adder

Condition: new, Year of construction: 2024, EMCO Concept MILL 105 PC - controlled CNC - table - machining center machining center Machine complete with full enclosure, safety devices according to CE, 10-fold tool drum, central lubrication, machine light, electrical and mechanical preparation for automation, Tool set for operation. Year 2024 Blodpfxjtz S Rhs Addjr

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Infinitely variable speed adjustment between gear ranges. Bsdpfxjxc H Dfj Addolr Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post.

Condition: new, Year of construction: 2024, EMCO Concept TURN 105 PC-controlled CNC bench lathe Machine complete with full enclosure, safety devices according to CE, 8-fold tool turner, manual tailstock manual tailstock, central lubrication, machine light, electrical and mechanical mechanical preparation for automation automation, tool set for operation. operation. Bljdpfxotz S I Ho Addsr Year 2024