Toolroom milling machine

EMCO FB-3

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 200 mm Rsdszczdhjpfx Airjch z-travel 350 mm table surface area 600 x 200 mm spindle taper SK 30 spindle turning speed range 80 - 2200 U/min feeds X-axis 50 - 550 mm/min feeds Y-axis 50 - 550 mm/min rapid traverse 1500 mm/min quill stroke 45 mm vertical head swivelling +/- 90 ° total power requirement 1,4 kW weight of the machine ca. 500 kg dimensions of machine L x W x H 1,50 x 1,20 x 1,60 m Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake Rcsdpszbb E Aefx Airjh >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Rodpfx Ajzhm Afjirjch Coolant tank: 30 l Flow rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-rib belt EQUIPMENT Quill clamping device Cooling system with 30-liter tank Coolant tank with quick-release closure Control panel Work light Coolant hose CE marking

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Rcsdjyvra Iopfx Airoh Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm swivelling range 90 Grad Rodpfx Aieipyx Tjrech weight of the machine ca. 150 kg Dividing head swivable of a Heckert FU 400

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Rsdpfx Aoxykafeirsch Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Rcsdpfx Aisxb Uq Dereh Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: D32L/7787, Offer Number: D32L/7787 Machinetype: spring coiling machine Make: WAFIOS Rcedpfxjwi S E Rs Airsh Type: FS41 Constr. year: 1995 wire diameter: 0,8-4,0 mm spring diameter: 70 mm feeding length: 1500 mm output pieces/min: 200 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Rodpfsylawxex Airjch

Condition: used, Year of construction: 1970, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was inspected and adjusted. A test protocol according to DIN 8615 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Rodez A Tn Ijpfx Airech Technical data Travel distances X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Feed: 16 stages: 10 to 500 mm/min Drive power: Two-stage motor approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping area: 600 x 210 mm Max. table load: approx. 150 kg Space requirement (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight approx.: 750 kg Requested item: Transport costs in an individual offer.